Description
LAGUN FTV-2 VERTICAL MILLING MACHINE
Model FTV-2 Serial Number SE-14350
SPECIFICATIONS
SPINDLE:
Taper R-8
Collet Capacity ¾” (19.05mm)
Quill Travel 5″ (127mm)
Quill Feed (Power per spindle revolutions)
0.003″, .0015″, .006″ IPM
SPINDLE SPEEDS: Infinitely Variable thru 2-Speed Range
55 thru 4250 rpm
SPINDLE HEAD: Tilts Up/Down 45º and
Swivels Right/Left 90º
TABLE: (3) T-Slots
Size Overall, 9″ W x 48″ L(228.6 X 1,219.2mm)
Longitudinal Travel, (X-Axis) Manual 33″(838mm)
Power Feed 29.5″(7493mm)
Cross-Slide Travel,(Y-Axis) Manual & Power 16″ (406mm)
Vertical Travel Knee, (Z-Axis) 18″(457.2mm)
FEEDS Table and Knee:
Longitudinal (Variable Feeds) Manual and Power
Knee Vertical Rise and Fall Manual
RAM:
Rotates 360 degrees
In/Out 22-3/16″ (563.563mm)
MOTOR DRIVES: Motors wired 440 volts, 3 phase
Spindle 3 hp (2.2 kw) 220-380440 volts
Table Feed Drive 2.2 Amps. 110 volts
CONTROLS
Power Feed Rate Control on each drive.
Spindle Speed Variable Control.
Spindle Feed Rate Shift Lever.
Down/Stop/Up Switch.
EQUIPPED WITH:
Sargon 2-Axis DRO Cross Feed & Longitudinal Travel
(13) R8 Collets (1/8″, 3/8″, 7/16″, 11/16″, 3/4″ )
(1) R8 Straight Shank Tool Holders (shank diameters 1″)
Coolant Pump.
Work Light.
| One Shot Lubrication.
COMPLETE FACTORY SAFETY GUARDS
Dimensions 67″ (1701mm) LR x 60¾” F-B x 104″ (2641mm) Height
Approximate Weight 2850 lbs.
Contact us to get a quote.
LAGUN FTV-2 VERTICAL MILLING MACHINE
Model FTV-2 Serial Number SE-14350
SPECIFICATIONS
SPINDLE:
Taper R-8
Collet Capacity ¾” (19.05mm)
Quill Travel 5″ (127mm)
Quill Feed (Power per spindle revolutions)
0.003″, .0015″, .006″ IPM
SPINDLE SPEEDS: Infinitely Variable thru 2-Speed Range
55 thru 4250 rpm
SPINDLE HEAD: Tilts Up/Down 45º and
Swivels Right/Left 90º
TABLE: (3) T-Slots
Size Overall, 9″ W x 48″ L(228.6 X 1,219.2mm)
Longitudinal Travel, (X-Axis) Manual 33″(838mm)
Power Feed 29.5″(7493mm)
Cross-Slide Travel,(Y-Axis) Manual & Power 16″ (406mm)
Vertical Travel Knee, (Z-Axis) 18″(457.2mm)
FEEDS Table and Knee:
Longitudinal (Variable Feeds) Manual and Power
Knee Vertical Rise and Fall Manual
RAM:
Rotates 360 degrees
In/Out 22-3/16″ (563.563mm)
MOTOR DRIVES: Motors wired 440 volts, 3 phase
Spindle 3 hp (2.2 kw) 220-380440 volts
Table Feed Drive 2.2 Amps. 110 volts
CONTROLS
Power Feed Rate Control on each drive.
Spindle Speed Variable Control.
Spindle Feed Rate Shift Lever.
Down/Stop/Up Switch.
EQUIPPED WITH:
Sargon 2-Axis DRO Cross Feed & Longitudinal Travel
(13) R8 Collets (1/8″, 3/8″, 7/16″, 11/16″, 3/4″ )
(1) R8 Straight Shank Tool Holders (shank diameters 1″)
Coolant Pump.
Work Light.
| One Shot Lubrication.
COMPLETE FACTORY SAFETY GUARDS
Dimensions 67″ (1701mm) LR x 60¾” F-B x 104″ (2641mm) Height
Approximate Weight 2850 lbs.
Contact us to get a quote.
![Lagun Vertical Milling Machine, Model FTV-2, Power Feed 10" x 50" Table, Variable Speed 55 thru 4250 rpm, Motor Drive 3 hp, Serial Number SE-39087 [M2824-10493]](https://centurymachinery.com/wp-content/uploads/2021/04/10493-1-lagun-vert-mill-FTV-2-power-feed-10-in-x-50-in-tbl-vari-speed-55-4250-rpm-3-hp-Serial-SE-39087-F-300x300.jpg "used Lagun FTV-2 Vertical Milling Machine with Power Feed 10 inch x 50 inch Table and Variable Speed 55 thru 4250 rpm, Motor Drive 3 hp, Serial Number SE-39087, Inventory Reference M2824-10493 - Century Machinery")
![Ekstrom Carlson Vertical Router & Milling Machine, Model 540, Variable Speed100-5000 rpm, Tilting Table 18" x 36", Longitudinal Table Travel 30", Manual Spindle Travel 8", Serial Number 540-166 [M2824-4032]](https://centurymachinery.com/wp-content/uploads/2021/04/4032_ekstrom-carlson-vert-routing-mill_mdl-540_tilt-18-in-x-36-in_Ltrav-30-in_100-5K-rpm_S-trav-8-in_Serial-540-166-300x300.jpg "Ekstrom Carlson 540 Pattern Makers Vertical Milling and Router Machine - Variable Speed 100-5000 rpm with Tilting Table 18\" x 36\" - Longitudinal Table Travel 30\" - Manual Spindle Travel 8\", Serial Number 540-166, Inventory Reference M2824-4032 - Century Machinery")
