Description
SHREP SUPER PRECISION ENGLISH METRIC TOOLROOM LATHE
Model 1118H Serial Number CTL-1479 Date Mfg’d 10-2003
SPECIFICATIONS
CAPACITY:
Swing Over Bed 11″ (279.4mm)
Swing Over Carriage 9″ (228.6mm)
Swing Over Cross Slide 6″ (152.4mm)
Distance Between Centers 18″ (457.2mm)
SPINDLE BORE DIAMETER 1¼” (31.75mm)
SPINDLE SPEEDS: Hi-Lo DVS Spindle Speed (Digital Read-Out) 130 thru 4000 rpm.
COMPOUND SLIDE TRAVEL 3″ (76.2mm)
FEEDS: Infinitely Variable ¼” to 7″ per minute (6.35 to 177.8mm)
THREADS: Quick Change Box
(36) Inch Range 11 – 108
(36) Millimeter Range 0.275 to 2.7
DIAL arrangement for Compound Slide Rest, Tilstock Inch & Metric
TAIL STOCK: Spindle Diameter 1.358″ (34.51mm.)
Taper 2 MT Quill Travel 3¾” (95.25mm)
COLLET: Size 5C
CAPACITY:
Round 1-1/16″ (26.99mm),
Square ¾” (19.05mm)
Hexagon 7/8″ (22.23mm)
MOTOR DRIVES: Wired 220 volts, 3-phase
Main 5 h.p. (37kw) 220 volts
Carriage 75 watts, 110 volts DC
Coolant Pump 1/4 h.p. (0.184kw) 208-220/440 volts
CONTROLS: Wired 115 volts
Spindle Speed Start Button, Emergency Stop Button.
Digital Spindle RPM Indicator.
Spindle RPM Indicator. Fast/Slow Switch.
Spindle Variable Speed Adjustment Dial.
Spindle Forward/Reverse Switch.
Hi-Lo DVS SpindleSpeed VR45 Lower Dial H/L Range Ratio D
Located on Power Cabinet front panel: Power on Lamp.
Coolant 3-position switch On/Off/\Auto.
Carriage Feed Control: DC Power Lamp 3-Position Switch
Left/Stop/Right
Carriage Feedrate adjustment Dial
EQUIPPED WITH:
(1) Chuck 6″ diameter three 2-piece jaws.
(1) Sony two axis DRO on Longitudinal Carriage & Cross Feed.
(1) Quick Change Tool Post with (7) Tool Holders #101, #102,
#103 Tool Holder #104, #104. #KDK #C61
(30) 5-C Collets miscellaneous sizes. (1) Cut Off Tool Holder
(1) Dead Center (2) Live Center. (1) Drill Chuck.
(1) Coolant Pump. (1) Work Light. (6) Steel Mounting Pad.
(1) Spindle Nose Cover. Rear Mounted Chip Curtain Guard
COMPLETE FACTORY SAFETY GUARDS
Dimensions: 36″ FB x 71″ LR x 74″ Ht.
(914.4 x 1,803 x 1,879.6mm
Approximate Weight 2300 lbs.
![15½" sw x 50" cc, Leblond Makino Regal Servo Shift Engine Lathe, Spindle 2.375", Speed 45-1800 rpm, in-mm, Taper, Serial Number 14C-411, [L3000-10261]](https://centurymachinery.com/wp-content/uploads/2021/04/10261-6-leblond-makino-regal-servo-shift-lathe15.5-in-x-50-in-ccspdl-2.375-in1800-rpmin-mmtaperSerial-14C-411baldor-grinder-LOCATED-IN-POD-Lathe-_-Tlg-300x300.jpg "15½\" sw x 50\" cc, Leblond Makino Regal Servo Shift Engine Lathe, Spindle 2.375\", Speed 45-1800 rpm, in-mm, Taper, Serial Number 14C-411, [L3000-10261] - Century Machinery")
![13" sw x 40" cc, Turnmaster Engine Lathe, Thru Hole 1.5", Spindle Speed 45-900 rpm, Inch-MM, Taper, 1.5 hp, Serial Number 1340F08850259 [L3000-10393]](https://centurymachinery.com/wp-content/uploads/2021/04/10393-1-turnmaster-lathe13-inch-sw-x-40-inch-cchole-1.5-in45-900-rpmin-mmtaper-1.5-hpSerial-1340F08850259-F-300x300.jpg "13 inch swing x 40 inch cc Turnmaster Engine Lathe with Thru Hole 1.5 inch Spindle Speed 45- 900 rpm - Inch-Metric - Taper Att 1.5 hp, Serial Number 1340F08850259, Inventory ReferenceL3000-10393 - Century Machinery")
