TO SCROLL DOWN▼ TO VIEW CATEGORIES.............................Please Use this scroll bar ► ► ►


*HOSE MACHINERY, CRIMPERS*
*SWAGING MACHINE*
*T
UBE END FORMING MACHINES*
*TUBE END FINISHERS*


Serving Industry for 83
years


Link back to Home Page► www.centurymachinery.com


If you require a Quote Sheet PLEASE  send  us your requirements:
CENTURY logo
1937 South Santa Fe Avenue
Los Angeles, California 90021

Email sales@centurymachinery.com
Website  www.centurymachinery.com
Telephone 1-213-627-2847

Fax 1-213-627-2499

 

HOSE MACHINERY  Ref. H6050-     CRIMPERS Ref. C7189

KARRYKRIMP HOSE CRIMPER MACHINE
    Model 82C-080
CAPACITY CRIMP 1/4” to 1¼″
Maximum Rating 30 Tons @ 10,000 psi.
With-out Dies and Pump
Inventory Reference H6050-C7189-10022
GREAT PRICE




 

  SWAGING MACHINE Ref. S8650-         


TORRINGTON ROTARY SWAGING MACHINE   
Model 4
     Two DIE,

CAPACITY DIAMETER:  SOLID Mild Steel ⅝" (15.9mm)
                                     TUBING 2" (50.8mm)
DIE WIDTH 1-15/16" 
(49.22mm)
DIE LENGTH 3"  (76.2mm)
DIE HEIGHT 2-11/16 " (68.26mm)
BACKER SIZE:
     Die Length   3" (76.2mm)
     Die Width     2" (50.8mm)
     Die Height    2-11/16" (68.26mm)
PART FEEDER:  Hand Feeder assembly is mounted onto preset rack.
       Feeder hand wheel moves tooling head

MOTOR DRIVE:  5 hp
EQUIPPED WITH:
     4-miscellaneous Die sets
    6- miscellaneous Liners sets.
    1- Spare Roller Rack Assembly 14" (355.6mm) outside diameter, 8" (203.2mm)
               inside diameter x 5" (127mm)  Ht.
    20- Rolls 2" (50.8mm) diameter x 3
" (85.73mm) length (8-new 12- very little use)
Inventory Reference S8650-10408
2" TORRINGTON DIE CLOSING SWAGING MACHINE, Model 4,TUBING with standard dies  2" 50.8mm, SOLID Mild Steel  ⅝" 15.9mm, DIAMETER HOLE thru SPINDLE 2" 50.8mm, LONGEST TAPER POSSIBLE 2¾"  69.85mm, Die Length 3", Die Width 1-15/16", Die Height  2-11/16", MOTOR 5 hp., PART FEEDER:  Hand Feeder assembly is mounted onto preset rack, EQUIPPED WITH 4-miscellaneous Die sets, 6- miscellaneous Liners sets, 1- Spare Roller Rack Assembly 14" outside diameter 8" inside diameter x 5" Ht, 20- Rolls 2" diameter x 3⅜" length, 8-new 12- very little use, Serial Number 4506
2" TORRINGTON DIE CLOSING SWAGING MACHINE, Model 4,TUBING with standard dies  2" 50.8mm, SOLID Mild Steel  ⅝" 15.9mm, DIAMETER HOLE thru SPINDLE 2" 50.8mm, LONGEST TAPER POSSIBLE 2¾"  69.85mm, Die Length 3", Die Width 1-15/16", Die Height  2-11/16", MOTOR 5 hp., PART FEEDER:  Hand Feeder assembly is mounted onto preset rack, EQUIPPED WITH 4-miscellaneous Die sets, 6- miscellaneous Liners sets, 1- Spare Roller Rack Assembly 14" outside diameter 8" inside diameter x 5" Ht, 20- Rolls 2" diameter x 3⅜" length, 8-new 12- very little use, Serial Number 4506, Photo Front to Left Side view Photo Front to Left Side view.      2" TORRINGTON DIE CLOSING SWAGING MACHINE, Model 4,TUBING with standard dies  2" 50.8mm, SOLID Mild Steel  ⅝" 15.9mm, DIAMETER HOLE thru SPINDLE 2" 50.8mm, LONGEST TAPER POSSIBLE 2¾"  69.85mm, Die Length 3", Die Width 1-15/16", Die Height  2-11/16", MOTOR 5 hp., PART FEEDER:  Hand Feeder assembly is mounted onto preset rack, EQUIPPED WITH 4-miscellaneous Die sets, 6- miscellaneous Liners sets, 1- Spare Roller Rack Assembly 14" outside diameter 8" inside diameter x 5" Ht, 20- Rolls 2" diameter x 3⅜" length, 8-new 12- very little use, Serial Number 4506, Photo Left Side view Photo Left Side view.     2" TORRINGTON DIE CLOSING SWAGING MACHINE, Model 4,TUBING with standard dies  2" 50.8mm, SOLID Mild Steel  ⅝" 15.9mm, DIAMETER HOLE thru SPINDLE 2" 50.8mm, LONGEST TAPER POSSIBLE 2¾"  69.85mm, Die Length 3", Die Width 1-15/16", Die Height  2-11/16", MOTOR 5 hp., PART FEEDER:  Hand Feeder assembly is mounted onto preset rack, EQUIPPED WITH 4-miscellaneous Die sets, 6- miscellaneous Liners sets, 1- Spare Roller Rack Assembly 14" outside diameter 8" inside diameter x 5" Ht, 20- Rolls 2" diameter x 3⅜" length, 8-new 12- very little use, Serial Number 4506, Photo Rear to Left Side view Photo Rear to Left Side view.
            2" TORRINGTON DIE CLOSING SWAGING MACHINE, Model 4,TUBING with standard dies  2" 50.8mm, SOLID Mild Steel  ⅝" 15.9mm, DIAMETER HOLE thru SPINDLE 2" 50.8mm, LONGEST TAPER POSSIBLE 2¾"  69.85mm, Die Length 3", Die Width 1-15/16", Die Height  2-11/16", MOTOR 5 hp., PART FEEDER:  Hand Feeder assembly is mounted onto preset rack, EQUIPPED WITH 4-miscellaneous Die sets, 6- miscellaneous Liners sets, 1- Spare Roller Rack Assembly 14" outside diameter 8" inside diameter x 5" Ht, 20- Rolls 2" diameter x 3⅜" length, 8-new 12- very little use, Serial Number 4506, Photo Rear at Right Side view Photo Rear at Right Side view.     2" TORRINGTON DIE CLOSING SWAGING MACHINE, Model 4,TUBING with standard dies  2" 50.8mm, SOLID Mild Steel  ⅝" 15.9mm, DIAMETER HOLE thru SPINDLE 2" 50.8mm, LONGEST TAPER POSSIBLE 2¾"  69.85mm, Die Length 3", Die Width 1-15/16", Die Height  2-11/16", MOTOR 5 hp., PART FEEDER:  Hand Feeder assembly is mounted onto preset rack, EQUIPPED WITH 4-miscellaneous Die sets, 6- miscellaneous Liners sets, 1- Spare Roller Rack Assembly 14" outside diameter 8" inside diameter x 5" Ht, 20- Rolls 2" diameter x 3⅜" length, 8-new 12- very little use, Serial Number 4506, Photo Front at Right Side view Photo Front at Right Side view.
2" TORRINGTON DIE CLOSING SWAGING MACHINE, Model 4,TUBING with standard dies  2" 50.8mm, SOLID Mild Steel  ⅝" 15.9mm, DIAMETER HOLE thru SPINDLE 2" 50.8mm, LONGEST TAPER POSSIBLE 2¾"  69.85mm, Die Length 3", Die Width 1-15/16", Die Height  2-11/16", MOTOR 5 hp., PART FEEDER:  Hand Feeder assembly is mounted onto preset rack, EQUIPPED WITH 4-miscellaneous Die sets, 6- miscellaneous Liners sets, 1- Spare Roller Rack Assembly 14" outside diameter 8" inside diameter x 5" Ht, 20- Rolls 2" diameter x 3⅜" length, 8-new 12- very little use, Serial Number 4506, Photo close-up Tooling Photo Close-up Tooling.        2" TORRINGTON DIE CLOSING SWAGING MACHINE, Model 4,TUBING with standard dies  2" 50.8mm, SOLID Mild Steel  ⅝" 15.9mm, DIAMETER HOLE thru SPINDLE 2" 50.8mm, LONGEST TAPER POSSIBLE 2¾"  69.85mm, Die Length 3", Die Width 1-15/16", Die Height  2-11/16", MOTOR 5 hp., PART FEEDER:  Hand Feeder assembly is mounted onto preset rack, EQUIPPED WITH 4-miscellaneous Die sets, 6- miscellaneous Liners sets, 1- Spare Roller Rack Assembly 14" outside diameter 8" inside diameter x 5" Ht, 20- Rolls 2" diameter x 3⅜" length, 8-new 12- very little use, Serial Number 4506, Photo close-up Spare Roller Assembly Photo Close-up Spare Roller Assembly.




FENN ROTARY SWAGING MACHINE   
Model 3F–2 DIE,
Serial Number 52454-1,    Date Mfg. December 1993
Condition: Excellent, Like New.
Elapsed Time Meter reads 2.7 hours of use.
CAPACITY DIAMETER:  SOLID Mild Steel ⅝"   (15.8mm)
                                          TUBING 1¾"  (44.4mm)
DIE WIDTH 2¼"  (57.1mm)
DIE LENGTH 2½"  (63.5mm)
DIE HEIGHT 1-19/32”  (40.5mm)
BORE THRU SPINDLE 1⅞" (47.725mm)
HEIGHT TO SPINDLE CENTER LINE 35"  (892.5mm)
MOTOR DRIVE:  5 hp
EQUIPPED WITH:
      Short Stop Electronic Motor Brake Control.
      Coolant Pump and Tank.
Inventory Reference S8650-10194
FENN ROTARY SWAGING MACHINE  Model 3F–2 DIE, TWO DIE TYPE, CAPACITY DIAMETER:  SOLID Mild Steel ⅝" 15.8mm, TUBING 1¾" 44.4mm, DIE WIDTH 2¼" 57.1mm, DIE LENGTH 2½" 63.5mm, DIE HEIGHT 1-19/32” 40.5mm, BORE THRU SPINDLE 1⅞", 47.725mm, HEIGHT TO SPINDLE CENTER LINE 35" 892.5mm, MOTOR DRIVES 5 hp, Coolant Pump ¼ hp. EQUIPPED WITH:Short Stop Electronic Motor Brake Control, Coolant Pump and Tank. Serial Number 52454-1, Date Mfg. December 1993, Condition Excellent, Like New. Elapsed Time Meter reads only 2.7 hours of use
FENN ROTARY SWAGING MACHINE  Model 3F–2 DIE, TWO DIE TYPE, CAPACITY DIAMETER:  SOLID Mild Steel ⅝" 15.8mm, TUBING 1¾" 44.4mm, DIE WIDTH 2¼" 57.1mm, DIE LENGTH 2½" 63.5mm, DIE HEIGHT 1-19/32” 40.5mm, BORE THRU SPINDLE 1⅞", 47.725mm, HEIGHT TO SPINDLE CENTER LINE 35" 892.5mm, MOTOR DRIVES 5 hp, Coolant Pump ¼ hp. EQUIPPED WITH:Short Stop Electronic Motor Brake Control, Coolant Pump and Tank. Serial Number 52454-1, Date Mfg. December 1993, Condition Excellent, Like New. Elapsed Time Meter reads only 2.7 hours of use, Photo Front view Photo Front view.    FENN ROTARY SWAGING MACHINE  Model 3F–2 DIE, TWO DIE TYPE, CAPACITY DIAMETER:  SOLID Mild Steel ⅝" 15.8mm, TUBING 1¾" 44.4mm, DIE WIDTH 2¼" 57.1mm, DIE LENGTH 2½" 63.5mm, DIE HEIGHT 1-19/32” 40.5mm, BORE THRU SPINDLE 1⅞", 47.725mm, HEIGHT TO SPINDLE CENTER LINE 35" 892.5mm, MOTOR DRIVES 5 hp, Coolant Pump ¼ hp. EQUIPPED WITH:Short Stop Electronic Motor Brake Control, Coolant Pump and Tank. Serial Number 52454-1, Date Mfg. December 1993, Condition Excellent, Like New. Elapsed Time Meter reads only 2.7 hours of use, Photo Right Side Front view Photo Right Side to Front view.
       FENN ROTARY SWAGING MACHINE  Model 3F–2 DIE, TWO DIE TYPE, CAPACITY DIAMETER:  SOLID Mild Steel ⅝" 15.8mm, TUBING 1¾" 44.4mm, DIE WIDTH 2¼" 57.1mm, DIE LENGTH 2½" 63.5mm, DIE HEIGHT 1-19/32” 40.5mm, BORE THRU SPINDLE 1⅞", 47.725mm, HEIGHT TO SPINDLE CENTER LINE 35" 892.5mm, MOTOR DRIVES 5 hp, Coolant Pump ¼ hp. EQUIPPED WITH:Short Stop Electronic Motor Brake Control, Coolant Pump and Tank. Serial Number 52454-1, Date Mfg. December 1993, Condition Excellent, Like New. Elapsed Time Meter reads only 2.7 hours of use, Photo Left Side Front view Photo Left Side to Front view.    FENN ROTARY SWAGING MACHINE  Model 3F–2 DIE, TWO DIE TYPE, CAPACITY DIAMETER:  SOLID Mild Steel ⅝" 15.8mm, TUBING 1¾" 44.4mm, DIE WIDTH 2¼" 57.1mm, DIE LENGTH 2½" 63.5mm, DIE HEIGHT 1-19/32” 40.5mm, BORE THRU SPINDLE 1⅞", 47.725mm, HEIGHT TO SPINDLE CENTER LINE 35" 892.5mm, MOTOR DRIVES 5 hp, Coolant Pump ¼ hp. EQUIPPED WITH:Short Stop Electronic Motor Brake Control, Coolant Pump and Tank. Serial Number 52454-1, Date Mfg. December 1993, Condition Excellent, Like New. Elapsed Time Meter reads only 2.7 hours of use, Photo Close-up Die Area Photo Close-up Die Area.
FENN ROTARY SWAGING MACHINE  Model 3F–2 DIE, TWO DIE TYPE, CAPACITY DIAMETER:  SOLID Mild Steel ⅝" 15.8mm, TUBING 1¾" 44.4mm, DIE WIDTH 2¼" 57.1mm, DIE LENGTH 2½" 63.5mm, DIE HEIGHT 1-19/32” 40.5mm, BORE THRU SPINDLE 1⅞", 47.725mm, HEIGHT TO SPINDLE CENTER LINE 35" 892.5mm, MOTOR DRIVES 5 hp, Coolant Pump ¼ hp. EQUIPPED WITH:Short Stop Electronic Motor Brake Control, Coolant Pump and Tank. Serial Number 52454-1, Date Mfg. December 1993, Condition Excellent, Like New. Elapsed Time Meter reads only 2.7 hours of use, Photo Operator Push Button Controls Photo Operator Push Button Controls.
          FENN ROTARY SWAGING MACHINE  Model 3F–2 DIE, TWO DIE TYPE, CAPACITY DIAMETER:  SOLID Mild Steel ⅝" 15.8mm, TUBING 1¾" 44.4mm, DIE WIDTH 2¼" 57.1mm, DIE LENGTH 2½" 63.5mm, DIE HEIGHT 1-19/32” 40.5mm, BORE THRU SPINDLE 1⅞", 47.725mm, HEIGHT TO SPINDLE CENTER LINE 35" 892.5mm, MOTOR DRIVES 5 hp, Coolant Pump ¼ hp. EQUIPPED WITH:Short Stop Electronic Motor Brake Control, Coolant Pump and Tank. Serial Number 52454-1, Date Mfg. December 1993, Condition Excellent, Like New. Elapsed Time Meter reads only 2.7 hours of use, Photo Electrical Power Shut Off when opening die area Photo Electrical Power Shut Off when opening die area.
FENN ROTARY SWAGING MACHINE  Model 3F–2 DIE, TWO DIE TYPE, CAPACITY DIAMETER:  SOLID Mild Steel ⅝" 15.8mm, TUBING 1¾" 44.4mm, DIE WIDTH 2¼" 57.1mm, DIE LENGTH 2½" 63.5mm, DIE HEIGHT 1-19/32” 40.5mm, BORE THRU SPINDLE 1⅞", 47.725mm, HEIGHT TO SPINDLE CENTER LINE 35" 892.5mm, MOTOR DRIVES 5 hp, Coolant Pump ¼ hp. EQUIPPED WITH:Short Stop Electronic Motor Brake Control, Coolant Pump and Tank. Serial Number 52454-1, Date Mfg. December 1993, Condition Excellent, Like New. Elapsed Time Meter reads only 2.7 hours of use, Photo Short Stop Motor Brake Photo Short Stop Motor Brake.      FENN ROTARY SWAGING MACHINE  Model 3F–2 DIE, TWO DIE TYPE, CAPACITY DIAMETER:  SOLID Mild Steel ⅝" 15.8mm, TUBING 1¾" 44.4mm, DIE WIDTH 2¼" 57.1mm, DIE LENGTH 2½" 63.5mm, DIE HEIGHT 1-19/32” 40.5mm, BORE THRU SPINDLE 1⅞", 47.725mm, HEIGHT TO SPINDLE CENTER LINE 35" 892.5mm, MOTOR DRIVES 5 hp, Coolant Pump ¼ hp. EQUIPPED WITH:Short Stop Electronic Motor Brake Control, Coolant Pump and Tank. Serial Number 52454-1, Date Mfg. December 1993, Condition Excellent, Like New. Elapsed Time Meter reads only 2.7 hours of use, Photo Electrical Power Shut Off when opening Belt Guard Photo Electrical Power Shut Off when opening Belt Guard.

 

            TUBE END FORMING MACHINES  T6554-         
TUBE END FINISHERS
T6502-



CLARK & LEWIS TUBE END FINISHING MACHINES
Model 2SD-3     Mfg. 1984
Capacity Flaring, Square & Deburring 1/8" thru 2" OD
Variable Speed 0 thru 1500
Pneumatic Automatic Jaw Closer.
Inventory Reference T6502-9806
clark & lewis power tube finisher_model 2SD-3_capacity 0.125 inch thru 2 inch_flaring_square & deburring_bead_auto jaw close_vari speed_drive 0.50 hp. 110 volts_Mfg 1984_Serial Number 0427  clark & lewis power tube finisher_model 2SD-3_capacity 0.125 inch thru 2 inch_flaring_square & deburring_bead_auto jaw close_vari speed_drive 0.50 hp. 110 volts_Mfg 1984_Serial Number 0427_Clamp end view Photo Clamp End view.   clark & lewis power tube finisher_model 2SD-3_capacity 0.125 inch thru 2 inch_flaring_square & deburring_bead_auto jaw close_vari speed_drive 0.50 hp. 110 volts_Mfg 1984_Serial Number 0427_Clamp end view_Over-all view Photo Side view.



CONRAC - LEONARD TUBE END FINISHING MACHINE
      
Model 3CP-HDF
  CAPACITY: Flaring, Square & Deburring 1/8" thru 3" OD  x 0.125" wt
                       Beading
7/16" to 1½" x 0.035" Wt.
                       Flanging Ferrous & Non Ferrous at 90 degrees 1½" to 2½" O.D
Inventory Reference T6502-10179 CLICK HERE FOR QUOTATION  CONRAC - LEONARD TUBE END FINISHING MACHINE, Model 3CP-HDF, FLARING Annealed Ferrous (S.S.) &Non Ferrous 1/8" to 3", BEADING Annealed Ferrous, ¼" to 3/8" Non Ferrous, 7/16" to 1½" Annealed Ferrous, 7/16" to 1½", SQUARING and DEBURRING Annealed Ferrous & Non Ferrous 1/8" to 3" OD, FLANGING TUBE Ferrous & Non Ferrous at 90 degrees 1½" to 2½" OD, SPINDLE SPEED, Infinitely Variable 175 thru 500 rpm, CLAMPING Automatic by Air Cylinder, MOTOR DRIVE 1 HP, EQUIPPED WITH 1-Adjustable Flaring Center 1/8” thru 2”, 1-Flaring Spindle Center, 1-Flaring Die 2" OD,Serial Number N-3401
 

The CONRAC LEONARD 3CP-HDF HAS BEEN SOLD,
   Please use as example of what you can expect with our company detailed finished.
▼                                                                                   ▼

CONRAC - LEONARD TUBE END FINISHING MACHINE, Model 3CP-HDF, FLARING Annealed Ferrous (S.S.) &Non Ferrous 1/8" to 3", BEADING Annealed Ferrous, ¼" to 3/8" Non Ferrous, 7/16" to 1½" Annealed Ferrous, 7/16" to 1½", SQUARING and DEBURRING Annealed Ferrous & Non Ferrous 1/8" to 3" OD, FLANGING TUBE Ferrous & Non Ferrous at 90 degrees 1½" to 2½" OD, SPINDLE SPEED, Infinitely Variable 175 thru 500 rpm, CLAMPING Automatic by Air Cylinder, MOTOR DRIVE 1 HP, EQUIPPED WITH 1-Adjustable Flaring Center 1/8” thru 2”, 1-Flaring Spindle Center, 1-Flaring Die 2" OD,Serial Number N-3401,Photo Left side to front view
Photo Left side to front view.   CONRAC - LEONARD TUBE END FINISHING MACHINE, Model 3CP-HDF, FLARING Annealed Ferrous (S.S.) &Non Ferrous 1/8" to 3", BEADING Annealed Ferrous, ¼" to 3/8" Non Ferrous, 7/16" to 1½" Annealed Ferrous, 7/16" to 1½", SQUARING and DEBURRING Annealed Ferrous & Non Ferrous 1/8" to 3" OD, FLANGING TUBE Ferrous & Non Ferrous at 90 degrees 1½" to 2½" OD, SPINDLE SPEED, Infinitely Variable 175 thru 500 rpm, CLAMPING Automatic by Air Cylinder, MOTOR DRIVE 1 HP, EQUIPPED WITH 1-Adjustable Flaring Center 1/8” thru 2”, 1-Flaring Spindle Center, 1-Flaring Die 2" OD,Serial Number N-3401,Photo Left side to front view with cover open Photo Left side to front view with cover open.
CONRAC - LEONARD TUBE END FINISHING MACHINE, Model 3CP-HDF, FLARING Annealed Ferrous (S.S.) &Non Ferrous 1/8" to 3", BEADING Annealed Ferrous, ¼" to 3/8" Non Ferrous, 7/16" to 1½" Annealed Ferrous, 7/16" to 1½", SQUARING and DEBURRING Annealed Ferrous & Non Ferrous 1/8" to 3" OD, FLANGING TUBE Ferrous & Non Ferrous at 90 degrees 1½" to 2½" OD, SPINDLE SPEED, Infinitely Variable 175 thru 500 rpm, CLAMPING Automatic by Air Cylinder, MOTOR DRIVE 1 HP, EQUIPPED WITH 1-Adjustable Flaring Center 1/8” thru 2”, 1-Flaring Spindle Center, 1-Flaring Die 2" OD,Serial Number N-3401,Photo Right side to front view with cover open
Photo Right side to front view with cover open.     CONRAC - LEONARD TUBE END FINISHING MACHINE, Model 3CP-HDF, FLARING Annealed Ferrous (S.S.) &Non Ferrous 1/8" to 3", BEADING Annealed Ferrous, ¼" to 3/8" Non Ferrous, 7/16" to 1½" Annealed Ferrous, 7/16" to 1½", SQUARING and DEBURRING Annealed Ferrous & Non Ferrous 1/8" to 3" OD, FLANGING TUBE Ferrous & Non Ferrous at 90 degrees 1½" to 2½" OD, SPINDLE SPEED, Infinitely Variable 175 thru 500 rpm, CLAMPING Automatic by Air Cylinder, MOTOR DRIVE 1 HP, EQUIPPED WITH 1-Adjustable Flaring Center 1/8” thru 2”, 1-Flaring Spindle Center, 1-Flaring Die 2" OD,Serial Number N-3401,Photo Close-up front view Flaring Die Photo close-up front view Flaring die.
CONRAC - LEONARD TUBE END FINISHING MACHINE, Model 3CP-HDF, FLARING Annealed Ferrous (S.S.) &Non Ferrous 1/8" to 3", BEADING Annealed Ferrous, ¼" to 3/8" Non Ferrous, 7/16" to 1½" Annealed Ferrous, 7/16" to 1½", SQUARING and DEBURRING Annealed Ferrous & Non Ferrous 1/8" to 3" OD, FLANGING TUBE Ferrous & Non Ferrous at 90 degrees 1½" to 2½" OD, SPINDLE SPEED, Infinitely Variable 175 thru 500 rpm, CLAMPING Automatic by Air Cylinder, MOTOR DRIVE 1 HP, EQUIPPED WITH 1-Adjustable Flaring Center 1/8” thru 2”, 1-Flaring Spindle Center, 1-Flaring Die 2" OD,Serial Number N-3401,Photo close-up down over-all view Flaring die
Photo close-up down over-all view Flaring die.     CONRAC - LEONARD TUBE END FINISHING MACHINE, Model 3CP-HDF, FLARING Annealed Ferrous (S.S.) &Non Ferrous 1/8" to 3", BEADING Annealed Ferrous, ¼" to 3/8" Non Ferrous, 7/16" to 1½" Annealed Ferrous, 7/16" to 1½", SQUARING and DEBURRING Annealed Ferrous & Non Ferrous 1/8" to 3" OD, FLANGING TUBE Ferrous & Non Ferrous at 90 degrees 1½" to 2½" OD, SPINDLE SPEED, Infinitely Variable 175 thru 500 rpm, CLAMPING Automatic by Air Cylinder, MOTOR DRIVE 1 HP, EQUIPPED WITH 1-Adjustable Flaring Center 1/8” thru 2”, 1-Flaring Spindle Center, 1-Flaring Die 2" OD,Serial Number N-3401,Photo close-up left side over-all view Flaring die Photo close-up left side over-all view Flaring die.
CONRAC - LEONARD TUBE END FINISHING MACHINE, Model 3CP-HDF, FLARING Annealed Ferrous (S.S.) &Non Ferrous 1/8" to 3", BEADING Annealed Ferrous, ¼" to 3/8" Non Ferrous, 7/16" to 1½" Annealed Ferrous, 7/16" to 1½", SQUARING and DEBURRING Annealed Ferrous & Non Ferrous 1/8" to 3" OD, FLANGING TUBE Ferrous & Non Ferrous at 90 degrees 1½" to 2½" OD, SPINDLE SPEED, Infinitely Variable 175 thru 500 rpm, CLAMPING Automatic by Air Cylinder, MOTOR DRIVE 1 HP, EQUIPPED WITH 1-Adjustable Flaring Center 1/8” thru 2”, 1-Flaring Spindle Center, 1-Flaring Die 2" OD,Serial Number N-3401,Photo close-up Flaring die
Photo close-up Flaring die area.     CONRAC - LEONARD TUBE END FINISHING MACHINE, Model 3CP-HDF, FLARING Annealed Ferrous (S.S.) &Non Ferrous 1/8" to 3", BEADING Annealed Ferrous, ¼" to 3/8" Non Ferrous, 7/16" to 1½" Annealed Ferrous, 7/16" to 1½", SQUARING and DEBURRING Annealed Ferrous & Non Ferrous 1/8" to 3" OD, FLANGING TUBE Ferrous & Non Ferrous at 90 degrees 1½" to 2½" OD, SPINDLE SPEED, Infinitely Variable 175 thru 500 rpm, CLAMPING Automatic by Air Cylinder, MOTOR DRIVE 1 HP, EQUIPPED WITH 1-Adjustable Flaring Center 1/8” thru 2”, 1-Flaring Spindle Center, 1-Flaring Die 2" OD,Serial Number N-3401,Photo close-up Spindle Speed Controls Photo close-up Spindle Speed Controls.
CONRAC - LEONARD TUBE END FINISHING MACHINE, Model 3CP-HDF, FLARING Annealed Ferrous (S.S.) &Non Ferrous 1/8" to 3", BEADING Annealed Ferrous, ¼" to 3/8" Non Ferrous, 7/16" to 1½" Annealed Ferrous, 7/16" to 1½", SQUARING and DEBURRING Annealed Ferrous & Non Ferrous 1/8" to 3" OD, FLANGING TUBE Ferrous & Non Ferrous at 90 degrees 1½" to 2½" OD, SPINDLE SPEED, Infinitely Variable 175 thru 500 rpm, CLAMPING Automatic by Air Cylinder, MOTOR DRIVE 1 HP, EQUIPPED WITH 1-Adjustable Flaring Center 1/8” thru 2”, 1-Flaring Spindle Center, 1-Flaring Die 2" OD,Serial Number N-3401,Photo Right Side
Photo Right Side view.


 

IF YOU DON’T SEE IT ??
*PLEASE*
CALL   1-213-627-2847
FAX  213-627-2499 or
E-mail us at  
sales@centurymachinery.com

  

TOP $$$ PAID for
ONE MACHINE or ENTIRE PLANT

" THANK YOU for taking the time to visit our Web Site "