SANDERS / POLISHERS & GRINDERS

Link back to Home Page► www.centurymachinery.com

POINT and CLICK CATEGORIES or JUST SCROLL DOWN, CATEGORIES ARE IN ALPHABETICAL ORDER.  ▬▬▬▬▬▬►

*BELT SANDERS / GRINDERS*
*BELT SANDER: New*
*BELT SANDERS / GRINDER, Tilting Belt*
*DEBURRING DISC FINISHER*
*DISC SANDERS / GRINDERS*
*DISC SANDERS: New Mfg. by Max*
*DISC AND SPINDLE SANDERS: Combination*
*DRUM SANDERS*
*SPINDLE SANDERS*
*SPINDLE SANDERS: New*
*WIDE BELT SANDER*
*WIDE BELT SANDERS: New*

WE HAVE IN STOCK DUST COLLECTORS

Serving Industry for 82 years

If you require a Quote Sheet PLEASE  send  us your requirements:

CENTURY logo
1937 South Santa Fe Avenue
Los Angeles, California 90021

Website: www.centurymachinery.com
Email: sales@centurymachinery.com
Telephone 1-213-627-2847
Fax 1-213-627-2499

"THE WAY A MACHINE LOOKS and THE WAY YOU SEE IT,
MAKES A PERFECT MATCH"


 

BELT SANDERS / GRINDERS   S0403-  G3975-


SCROLL DOWN to view both Wet and Dry units.


WET TYPE

27" AEM (Now Timesaver) RECIPROCATING BED ABRASIVE BELT GRINDER
Wide Belt,    EXTRA HEAVY DUTY      WET TYPE
Model 75-25          Date Mfg. 3-15-90
27" wide Sanding Belt

Reciprocating Bed, overall size  26" F-B x 28" L-R
Part Fixture Table 25" x 25" with 3 point clamping.
Belt Motor Drive 75 hp.
Automatic Reciprocating Bed movement, Longitudinally and Up Feed.
Coolant Tank and Pump.
Equipped with: Bed Positioning DRO.     Manual and Automatic Operation.
     Automatic Feed Cycle.    Fixture Clamping.   Operator Control Station.
     Drive Motor per cent load meter.    Coolant Pump and Tank.
THIS UNIT HAS Steel Contact Drum 9" diameter and
  1- additional spare "New" Rubber Coated Contact Drum.
   Spare "New " Pillar Bearing Blocks for contact drum.
Inventory Reference G3975-9651  
CLICK HERE FOR QUOTATION   aem wet reciprocating bed abrasive belt grinder_single belts 27 inch wide_model 75-25_belt_reciprocating bed overall size 26 inch F-B x 28 inch L-R_moving bed linear movement - stroke 43 inch_vertical bed adjustment 8 inch_work area opening between coolant drum and bed 6 inch thru 14 inch_digital readout on bed elevation_with fixture table 24 inch x 24 inch with pneumatic part clamps mounted on table_abrasive belt drive 75 hp_Mfg 1990_Serial Number 1351-2664  CLICK HERE FOR PHOTO  aem wet reciprocating bed abrasive belt grinder_single belts 27 inch wide_model 75-25_belt_reciprocating bed overall size 26 inch F-B x 28 inch L-R_moving bed linear movement - stroke 43 inch_vertical bed adjustment 8 inch_work area opening between coolant drum and bed 6 inch thru 14 inch_digital readout on bed elevation_with fixture table 24 inch x 24 inch with pneumatic part clamps mounted on table_abrasive belt drive 75 hp_Mfg 1990_Serial Number 1351-2664 Photo Out feed view.
 CLICK HERE FOR PHOTO   aem wet reciprocating bed abrasive belt grinder_single belts 27 inch wide_model 75-25_belt_reciprocating bed overall size 26 inch F-B x 28 inch L-R_moving bed linear movement - stroke 43 inch_vertical bed adjustment 8 inch_work area opening between coolant drum and bed 6 inch thru 14 inch_digital readout on bed elevation_with fixture table 24 inch x 24 inch with pneumatic part clamps mounted on table_abrasive belt drive 75 hp_Mfg 1990_Serial Number 1351-2664_Infeed view Photo Infeed view.     CLICK HERE FOR PHOTO   aem wet reciprocating bed abrasive belt grinder_single belts 27 inch wide_model 75-25_belt_reciprocating bed overall size 26 inch F-B x 28 inch L-R_moving bed linear movement - stroke 43 inch_vertical bed adjustment 8 inch_work area opening between coolant drum and bed 6 inch thru 14 inch_digital readout on bed elevation_with fixture table 24 inch x 24 inch with pneumatic part clamps mounted on table_abrasive belt drive 75 hp_Mfg 1990_Serial Number 1351-2664_Reciprocating Bed and Fixture Table Infeed view Photo Reciprocating Bed and Fixture Table In-feed view.
 CLICK HERE FOR PHOTO   aem wet reciprocating bed abrasive belt grinder_single belts 27 inch wide_model 75-25_belt_reciprocating bed overall size 26 inch F-B x 28 inch L-R_moving bed linear movement - stroke 43 inch_vertical bed adjustment 8 inch_work area opening between coolant drum and bed 6 inch thru 14 inch_digital readout on bed elevation_with fixture table 24 inch x 24 inch with pneumatic part clamps mounted on table_abrasive belt drive 75 hp_Mfg 1990_Serial Number 1351-2664_Reciprocating Bed and Fixture Table Out feed view Photo Reciprocating Bed and Fixture Table Out-feed view.
 CLICK HERE FOR PHOTO   aem wet reciprocating bed abrasive belt grinder_single belts 27 inch wide_model 75-25_belt_reciprocating bed overall size 26 inch F-B x 28 inch L-R_moving bed linear movement - stroke 43 inch_vertical bed adjustment 8 inch_work area opening between coolant drum and bed 6 inch thru 14 inch_digital readout on bed elevation_with fixture table 24 inch x 24 inch with pneumatic part clamps mounted on table_abrasive belt drive 75 hp_Mfg 1990_Serial Number 1351-2664_Close up Operator Control Station Photo Close-up Operator Control Station.




DRY TYPE

36" BURLINGTON Rand Bright RECIPROCATING BED ABRASIVE BELT GRINDER
Wide Belt,   Heavy Duty
Model S36X75R          Date Mfg. 11-1998
36" wide Sanding Belt

Reciprocating Bed overall size 24" x 45"
Belt Motor Drive 30 hp.
Equipped with: Manual and Automatic Operation.
    Automatic Reciprocating Bed movement, Longitudinally and Up Feed.
    Bed Positioning DRO.   Pneumatic Fixture Clamping.
    Drive Motor per cent load meter.
Inventory Reference G3975-9650  
CLICK HERE FOR QUOTATION  burlington rand bright reciprocating bed abrasive belt grinder_single belts 36 inch wide_model S36X75R_belt drive 30 hp_bed 24 inch x 46 inch_dro on bed elevation_Mfg 11-1998_Serial Number 1351-2664
CLICK HERE FOR PHOTO  burlington reciprocating bed abrasive grinder_model S36X75R_capacity belt 36 inch wide_automatic feed bed  with rise and fall_bed 24 inch x 45 inch_bed hight dro_belt drive 30 hp_date manufactured 11-1998_Serial Number 13512664 Photo Front view.     CLICK HERE FOR PHOTO burlington reciprocating bed abrasive grinder_model S36X75R_capacity belt 36 inch wide_automatic feed bed  with rise and fall_bed 24 inch x 45 inch_bed hight dro_belt drive 30 hp_date manufactured 11-1998_Serial Number 13512664 Photo Part Holding Fixture.    CLICK HERE FOR PHOTO burlington reciprocating bed abrasive grinder_model S36X75R_capacity belt 36 inch wide_automatic feed bed  with rise and fall_bed 24 inch x 45 inch_bed hight dro_belt drive 30 hp_date manufactured 11-1998_Serial Number 13512664_right side view with out part fixture Photo Front to right side view.
CLICK HERE FOR PHOTO burlington reciprocating bed abrasive grinder_model S36X75R_capacity belt 36 inch wide_automatic feed bed  with rise and fall_bed 24 inch x 45 inch_bed hight dro_belt drive 30 hp_date manufactured Number 11-1998_Serial 13512664_close up bed height DRO
Photo Close-up Bed Height DRO.     CLICK HERE FOR PHOTO burlington reciprocating bed abrasive grinder_model S36X75R_capacity belt 36 inch wide_automatic feed bed  with rise and fall_bed 24 inch x 45 inch_bed hight dro_belt drive 30 hp_date manufactured 11-1998_Serial Number 13512664_rear view Photo Rear view.
CLICK HERE FOR PHOTO burlington reciprocating bed abrasive grinder_model S36X75R_capacity belt 36 inch wide_automatic feed bed  with rise and fall_bed 24 inch x 45 inch_bed hight dro_belt drive 30 hp_date manufactured 11-1998_Serial Number 13512664_view inside sanding belt chamber
Photo View inside drum and belt cabinet.   CLICK HERE FOR PHOTO burlington reciprocating bed abrasive grinder_model S36X75R_capacity belt 36 inch wide_automatic feed bed  with rise and fall_bed 24 inch x 45 inch_bed hight dro_belt drive 30 hp_date manufactured 11-1998_Serial Number 13512664_Left side view Photo Left side view.


 

"NEW" RAMCO WIDE BELT SANDERS

 Width of Sanding Belt: Available  24 inch thru 50 inch


For quotes,  Please;
    Call 1-213-627-2847
    Fax  1-213-627-2499
   
E-mail us at sales@centurymachinery.com
 







BELT SANDERS / GRINDER, Tilting Belt  

None in stock at this time, Thank You




DEBURRING DISC FINISHER   D0654-

27" AEM (Now Timesaver) RECIPROCATING BED ABRASIVE BELT GRINDER
Wide Belt,    EXTRA HEAVY DUTY      WET TYPE
Model 75-25          Date Mfg. 3-15-90
27" wide Sanding Belt

Reciprocating Bed, overall size  26" F-B x 28" L-R
Part Fixture Table 25" x 25" with 3 point clamping.
Belt Motor Drive 75 hp.
Automatic Reciprocating Bed movement, Longitudinally and Up Feed.
Coolant Tank and Pump.
Equipped with: Bed Positioning DRO.     Manual and Automatic Operation.
     Automatic Feed Cycle.    Fixture Clamping.   Operator Control Station.
     Drive Motor per cent load meter.    Coolant Pump and Tank.
THIS UNIT HAS Steel Contact Drum 9" diameter and
  1- additional spare "New" Rubber Coated Contact Drum.
   Spare "New " Pillar Bearing Blocks for contact drum.
Inventory Reference G3975-9651  
CLICK HERE FOR QUOTATION   aem wet reciprocating bed abrasive belt grinder_single belts 27 inch wide_model 75-25_belt_reciprocating bed overall size 26 inch F-B x 28 inch L-R_moving bed linear movement - stroke 43 inch_vertical bed adjustment 8 inch_work area opening between coolant drum and bed 6 inch thru 14 inch_digital readout on bed elevation_with fixture table 24 inch x 24 inch with pneumatic part clamps mounted on table_abrasive belt drive 75 hp_Mfg 1990_Serial Number 1351-2664  CLICK HERE FOR PHOTO  aem wet reciprocating bed abrasive belt grinder_single belts 27 inch wide_model 75-25_belt_reciprocating bed overall size 26 inch F-B x 28 inch L-R_moving bed linear movement - stroke 43 inch_vertical bed adjustment 8 inch_work area opening between coolant drum and bed 6 inch thru 14 inch_digital readout on bed elevation_with fixture table 24 inch x 24 inch with pneumatic part clamps mounted on table_abrasive belt drive 75 hp_Mfg 1990_Serial Number 1351-2664 Photo Out feed view.
 CLICK HERE FOR PHOTO   aem wet reciprocating bed abrasive belt grinder_single belts 27 inch wide_model 75-25_belt_reciprocating bed overall size 26 inch F-B x 28 inch L-R_moving bed linear movement - stroke 43 inch_vertical bed adjustment 8 inch_work area opening between coolant drum and bed 6 inch thru 14 inch_digital readout on bed elevation_with fixture table 24 inch x 24 inch with pneumatic part clamps mounted on table_abrasive belt drive 75 hp_Mfg 1990_Serial Number 1351-2664_Infeed view Photo Infeed view.     CLICK HERE FOR PHOTO   aem wet reciprocating bed abrasive belt grinder_single belts 27 inch wide_model 75-25_belt_reciprocating bed overall size 26 inch F-B x 28 inch L-R_moving bed linear movement - stroke 43 inch_vertical bed adjustment 8 inch_work area opening between coolant drum and bed 6 inch thru 14 inch_digital readout on bed elevation_with fixture table 24 inch x 24 inch with pneumatic part clamps mounted on table_abrasive belt drive 75 hp_Mfg 1990_Serial Number 1351-2664_Reciprocating Bed and Fixture Table Infeed view Photo Reciprocating Bed and Fixture Table In-feed view.
 CLICK HERE FOR PHOTO   aem wet reciprocating bed abrasive belt grinder_single belts 27 inch wide_model 75-25_belt_reciprocating bed overall size 26 inch F-B x 28 inch L-R_moving bed linear movement - stroke 43 inch_vertical bed adjustment 8 inch_work area opening between coolant drum and bed 6 inch thru 14 inch_digital readout on bed elevation_with fixture table 24 inch x 24 inch with pneumatic part clamps mounted on table_abrasive belt drive 75 hp_Mfg 1990_Serial Number 1351-2664_Reciprocating Bed and Fixture Table Out feed view Photo Reciprocating Bed and Fixture Table Out-feed view.
 CLICK HERE FOR PHOTO   aem wet reciprocating bed abrasive belt grinder_single belts 27 inch wide_model 75-25_belt_reciprocating bed overall size 26 inch F-B x 28 inch L-R_moving bed linear movement - stroke 43 inch_vertical bed adjustment 8 inch_work area opening between coolant drum and bed 6 inch thru 14 inch_digital readout on bed elevation_with fixture table 24 inch x 24 inch with pneumatic part clamps mounted on table_abrasive belt drive 75 hp_Mfg 1990_Serial Number 1351-2664_Close up Operator Control Station Photo Close-up Operator Control Station.




DRY TYPE

36" BURLINGTON Rand Bright RECIPROCATING BED ABRASIVE BELT GRINDER
Wide Belt,   Heavy Duty
Model S36X75R          Date Mfg. 11-1998
36" wide Sanding Belt

Reciprocating Bed overall size24" x 45"
Belt Motor Drive 30 hp.
Equipped with: Manual and Automatic Operation.
    Automatic Reciprocating Bed movement, Longitudinally and Up Feed.
    Bed Positioning DRO.   Pneumatic Fixture Clamping.
    Drive Motor per cent load meter.
Inventory Reference G3975-9650  
CLICK HERE FOR QUOTATION  burlington rand bright reciprocating bed abrasive belt grinder_single belts 36 inch wide_model S36X75R_belt drive 30 hp_bed 24 inch x 46 inch_dro on bed elevation_Mfg 11-1998_Serial Number 1351-2664
CLICK HERE FOR PHOTO  burlington reciprocating bed abrasive grinder_model S36X75R_capacity belt 36 inch wide_automatic feed bed  with rise and fall_bed 24 inch x 45 inch_bed hight dro_belt drive 30 hp_date manufactured 11-1998_Serial Number 13512664 Photo Front view.     CLICK HERE FOR PHOTO burlington reciprocating bed abrasive grinder_model S36X75R_capacity belt 36 inch wide_automatic feed bed  with rise and fall_bed 24 inch x 45 inch_bed hight dro_belt drive 30 hp_date manufactured 11-1998_Serial Number 13512664 Photo Part Holding Fixture.    CLICK HERE FOR PHOTO burlington reciprocating bed abrasive grinder_model S36X75R_capacity belt 36 inch wide_automatic feed bed  with rise and fall_bed 24 inch x 45 inch_bed hight dro_belt drive 30 hp_date manufactured 11-1998_Serial Number 13512664_right side view with out part fixture Photo Front to right side view.
CLICK HERE FOR PHOTO burlington reciprocating bed abrasive grinder_model S36X75R_capacity belt 36 inch wide_automatic feed bed  with rise and fall_bed 24 inch x 45 inch_bed hight dro_belt drive 30 hp_date manufactured Number 11-1998_Serial 13512664_close up bed height DRO
Photo Close-up Bed Height DRO.     CLICK HERE FOR PHOTO burlington reciprocating bed abrasive grinder_model S36X75R_capacity belt 36 inch wide_automatic feed bed  with rise and fall_bed 24 inch x 45 inch_bed hight dro_belt drive 30 hp_date manufactured 11-1998_Serial Number 13512664_rear view Photo Rear view.
CLICK HERE FOR PHOTO burlington reciprocating bed abrasive grinder_model S36X75R_capacity belt 36 inch wide_automatic feed bed  with rise and fall_bed 24 inch x 45 inch_bed hight dro_belt drive 30 hp_date manufactured 11-1998_Serial Number 13512664_view inside sanding belt chamber
Photo View inside drum and belt cabinet.   CLICK HERE FOR PHOTO burlington reciprocating bed abrasive grinder_model S36X75R_capacity belt 36 inch wide_automatic feed bed  with rise and fall_bed 24 inch x 45 inch_bed hight dro_belt drive 30 hp_date manufactured 11-1998_Serial Number 13512664_Left side view Photo Left side view.








DISC SANDERS / GRINDERS 

                                                                                             USE SCROLL BAR TO VIEW DUST COLLECTORS ►►
                                                                                                                           IN THIS SECTION.

20
" diameter MAX double DISC SANDER
Model 20-DD      Heavy Duty

2-Tables each has a working surface of 12" x 24"
    and tilt up/down with rise and fall vertical movement.
Disc Motor Drive 2hp
Equipped with:
   two 1/3 hp Exhaust blowers.

Inventory Reference S0453-10285 CLICK HERE FOR QUOTATION  max heavy duty two 20 inch diameter sanding  discs, model 20-DD, capacity each sanding discs 20 inch diameter, size each tilting table 12 inch x 27 inch with rise and fall, disc drive 3 hp, equipped two exhaust blower, Serial 20DD, 13499-10-14



24
" diameter disc MAX DISC SANDER
Model 24SDP       Heavy Duty

Table working surface 12" x 31"
    tilting table with rise and fall vertical movement.
Disc Motor Drive 5hp
Equipped with:
   1/2 hp Exhaust blower.

Inventory Reference S0453-10196  CLICK HERE FOR QUOTATION  max heavy duty single disc sander_model 24-SDP_capacity sanding disc 24 inch diameter_size tilting table 12 inch x 31.5 inch with rise and fall_disc drive 5 hp_equipped exhaust blower_Serial 24SDP-890  CLICK HERE FOR PHOTO  max heavy duty single disc sander_model 24 SDP_diameter disc 24 inch_tilting table 12 inch x 31.5 inch_with rise and fall_motor drive 5 HP, with .05 HP dust collector_Serial 24SDP-890 Photo



30" diameter disc MAX Disc Sander
Model 30-SD

Table working surface 14" x 38.5"
Table Tilts 30 up and 45 down
Table Carriage has rise and fall vertical movement.
Disc Motor Drive  5 hp.

Inventory Reference S0453-10308  CLICK HERE FOR QUOTATION  max heavy duty single disc sander, 30 inch disc diameter, model 30-SD, tilting table 15 inch x 38.5 inch with rise and fall, motor drive 5 HP   CLICK HERE FOR PHOTO  max heavy duty single disc sander, 30 inch disc diameter, model 30-SD, tilting table 15 inch x 38.5 inch with rise and fall, motor drive 5 HP, Photo Front Photo Front.   CLICK HERE FOR PHOTO  max heavy duty single disc sander, 30 inch disc diameter, model 30-SD, tilting table 15 inch x 38.5 inch with rise and fall, motor drive 5 HP, Photo Right Side Photo Right Side.
CLICK HERE FOR PHOTO  max heavy duty single disc sander, 30 inch disc diameter, model 30-SD, tilting table 15 inch x 38.5 inch with rise and fall, motor drive 5 HP, Photo Left Side to Front Photo Left Side to Front.    CLICK HERE FOR PHOTO  max heavy duty single disc sander, 30 inch disc diameter, model 30-SD, tilting table 15 inch x 38.5 inch with rise and fall, motor drive 5 HP, Photo Right Side at Rear Photo Right Side at Rear.    CLICK HERE FOR PHOTO  max heavy duty single disc sander, 30 inch disc diameter, model 30-SD, tilting table 15 inch x 38.5 inch with rise and fall, motor drive 5 HP, Photo Rear to Left Side Photo Rear to Left Side.

 

CHECK OUT PHOTOS
THIS SANDER HAS BEEN fully reconditioned July 3, 2015
                                                                                           

30" diameter disc MAX Combination Disc and Spindle Sander
Model 30-DVS
Disc Sander
30-D has tilting table and has rise and fall vertical movement.
Table working surface 15" x 38.5"
Disc Motor Drive  5 hp. 
Spindle Sander
VS-1  with Oscillating Spindle and  Tilt Table
    Table working surface 24" x 24"
    Tilts 10
up and 45 down
Spindle Motor Drive for both units 1 hp
Inventory Reference S0453- S0403-9203  CLICK HERE FOR QUOTATION  max 30DVS combination 30 inch diameter discs sander30-D and  independent spindle sander VS-1, both with tilt tables, motor drives 5 hp disc and 1 hp spindle, Serial 30DVS-103-30
CLICK HERE FOR PHOTO  max 30DVS combination 30 inch diameter discs sander30-D and  independent spindle sander VS-1, both with tilt tables, motor drives 5 hp disc and 1 hp spindle, Serial 30DVS-103-30, Photo right side view disc sander Photo right side view Disc Sander.        CLICK HERE FOR PHOTO  max 30DVS combination 30 inch diameter discs sander30-D and  independent spindle sander VS-1, both with tilt tables, motor drives 5 hp disc and 1 hp spindle, Serial 30DVS-103-30, Photo Spindle Sander at its Right Side Photo Spindle Sander at its Right Side.    CLICK HERE FOR PHOTO  max 30DVS combination 30 inch diameter discs sander30-D and  independent spindle sander VS-1, both with tilt tables, motor drives 5 hp disc and 1 hp spindle, Serial 30DVS-103-30, Photo Side over-all view. Photo Side over-all view.



30" diameter disc MAX Combination Disc and Spindle Sander
Model 30-DVS
Disc Sander
30-D has tilting table and has rise and fall vertical movement.
Table working surface 15" x 38.5"
Disc Motor Drive  5 hp. 
Spindle Sander
VS-1 with Oscillating Spindle and  Tilt Table
    Table working surface 24" x 24"
    Tilts 10
up and 45 down
Spindle Motor Drive for both units 1 hp
Inventory Reference S0453 - S0403-9538 CLICK HERE FOR QUOTATION  max combination 30 inch diameter disc and  independent spindle sander_model 30DVS_disc model 30-SD_spindle model  VS-1_motors drive 5 hp disc and motor drive 1 hp spindle_date  Mfg 1994_Serial 94312  CLICK HERE FOR PHOTO  max combination 30 inch diameter discs sander and  independent spindle sander_model 30 DVS_both with tilt tables_motor drives 5 hp disc and 1 hp spindle_disc model 30-SD_Spindle model VS1_tilting tables Photo




"NEW" 
MAX DISC SANDERS
  12" thru 36" Single & Double Disc's
MAX SPINDLE SANDER   Model VSI-17 & VSI-18



For quotes,  Please;
 
   Call 1-213-627-2847
    Fax  1- 213-627-2499
    E-mail us at sales@centurymachinery.com




DUST COLLECTORS              Scroll down to view  ►

MURPHY RODGER DUST COLLECTOR
Size MRT-7A-S
PORTABLE SELF CONTAINED
FILTER MEDIUM: Dry Type Single Cloth Bags
AIR DELIVERED 1206 cfm.
FREE AIR 1600 cfm.
INLET DUCT OPENING 7
FAN MOTOR: 3 hp
EQUIPPED WITH:
      Radial type Fan & Motor.  Assembly Filter Bag.
      Vertical Piping & Elbows to Filter Bag.
      1- 55 Gallon Waste Barrel (Container)
      All mounted on Portable Cart.
     
Magnetic Starter
Dimensions 23" F-B x 51 L-R x 91 High
New replacement cost $2700.00 each
Condition  LIKE NEW
Inventory Reference Numbers  D8300-9914 
CLICK HERE FOR QUOTATION  murphy rodgers dust collector_model MRT-7AS_self contained_cubic feet per minute 1206 cfm_inlet opening 7 inch_filter medium cloth bages_storage drum 55 gallon_drive 3 hp_mounted on partable cart_Serial Number 1040_LIKE NEW CONDITION  CLICK HERE FOR PHOTO  murphy rodgers dust collector_model MRT-7AS_self contained_cubic feet per minute 1206 cfm_inlet opening 7 inch_filter medium cloth bages_storage drum 55 gallon_drive 3 hp_mounted on partable cart_Serial Number 1040_LIKE NEW CONDITION  Photo                                       
SPECIAL WEBSITE DISCOUNTED PRICE $900.00



CINCINNATI  DUST COLLECTOR
Model 200S/T3
PORTABLE SELF CONTAINED
AIR DELIVERED 1200 cfm.
INLET DUCT OPENING 5
OUTLET DUCT OPENING 6"
FAN MOTOR: 2 hp. 208-230/460 volts
EQUIPPED WITH:
      Mounted onto 55 gallon drum which is then
         mounted on Portable Cart.

     
Magnetic Starter
Condition Like New
Inventory Reference Numbers  D8300-9993  CLICK HERE FOR QUOTATION  cincinnati dust collector_model 200S-T3_1100 CFPM_inlet opening 5 inch_18 sq ft filter bages_storage drum 55 gal_2 hp_storage tank on casters_Serial Number 700186_MOUNTED ON PORTABLE CART  CLICK HERE FOR PHOTO  cincinnati dust collector_model 200S-T3_1100 CFPM_inlet opening 5 inch_18 sq ft filter bages_storage drum 55 gal_2 hp_storage tank on casters_P.O. GR22424250_Serial Number 700186 Photo
SPECIAL WEBSITE DISCOUNTED PRICE $350.00



MICRO AIR FILTER and FAN
Model MT800
Mounted on wheels
Motor Drive 1/4 hp. 115 volts
Inventory Reference A2980-9180 micro air filter and fan_model MT800_mounted on wheels_motor drive 0.250 hp_115 volts Photo



REESE SELF CONTAINED DUST COLLECTOR
Can be used with Metal Grinder
Model 5.4-60
Hopper Type
Exhaust Cubic Feet Per Minute 1100 cfm
Filter Medium Cloth Bags
Motor drive 3/4 hp 230/460 volts
Inventory Reference D8300-9536 CLICK HERE FOR QUOTATION  reese dust collector_model 5-4-60_self contained_cubic feet per minute 1100 cfm_filter medium cloth bages_inlet opening 3 inch_drive 0.75 hp_Serial Number 11478-1



AGET DUSTKOP DUST COLLECTOR
Can be used with Metal Grinder
Series 800,  Model 8N50,   Serial Number 541
CENTRIFUGAL SEPARATOR
FILTER MEDIUM: Dry Type, Wire Mesh
RATINGS, 200 TO 900 C.F.M. at 5.25 to 2 W.G
RECOMMENDED OPERATING RANGE, 300 TO 700 C.F.M. at 5.25
With
DUST STORAGE: Pull-Out Drawer: Capacity 3.4 Cubic Feet
     
1-After Filter located on top of cyclone
      1-Section Inlet duct with Suction Shut Off 
Inventory Reference   D8300-9535-1B  CLICK HERE FOR QUOTATION  aget dustkop dust collector_series 800_model 8N50_ratings 200 - 900 cfm at 5.25 inch to 2 inch MG_with pull-out storage bin_ 0.75 hp_Serial Number 541
CLICK HERE FOR PHOTO  aget dustkop dust collector_series 800_model 8N50_ratings 200 - 900 cfm at 5.25 inch to 2 inch MG_with pull-out storage bin_ 0.75 hp_Serial Number 541  CLICK HERE FOR PHOTO  aget dustkop dust collector_series 800_model 8N50_ratings 200 - 900 cfm at 5.25 inch to 2 inch MG_with pull-out storage bin_ 0.75 hp_Serial Number 541  CLICK HERE FOR PHOTO  aget dustkop dust collector_series 800_model 8N50_ratings 200 - 900 cfm at 5.25 inch to 2 inch MG_with pull-out storage bin_ 0.75 hp_Serial Number 541  CLICK HERE FOR PHOTO  aget dustkop dust collector_series 800_model 8N50_ratings 200 - 900 cfm at 5.25 inch to 2 inch MG_with pull-out storage bin_ 0.75 hp_Serial Number 541  Photos View of unit.





DISC & SPINDLE SANDER: Combination

two MAX combination Disc & Spindle Sanders in Stock
                                                                                    

CHECK OUT PHOTOS
THIS SANDER HAS BEEN fully reconditioned July 3, 2015
▼ 
                                                                                          

30" diameter disc MAX Combination Disc and Spindle Sander
 Model 30-DVS
 Disc Sander  30-D
has tilting table and has rise and fall vertical movement
 Table working surface 15" x 38.5"
 Disc Motor Dive  5 hp
 Spindle Sander VS-1
with Oscillating Spindle and  Tilt Table
     Table working surface 24" x 24"
     Tilts 10
up and 45 down
 
Spindle Motor Drive for both units 1 hp
Inventory Reference S0453- S0403-9203  CLICK HERE FOR QUOTATION  max 30DVS combination 30 inch diameter discs sander30-D and  independent spindle sander VS-1, both with tilt tables, motor drives 5 hp disc and 1 hp spindle, Serial 30DVS-103-30
CLICK HERE FOR PHOTO  max 30DVS combination 30 inch diameter discs sander30-D and  independent spindle sander VS-1, both with tilt tables, motor drives 5 hp disc and 1 hp spindle, Serial 30DVS-103-30, Photo right side view disc sander Photo right side view Disc Sander.        CLICK HERE FOR PHOTO  max 30DVS combination 30 inch diameter discs sander30-D and  independent spindle sander VS-1, both with tilt tables, motor drives 5 hp disc and 1 hp spindle, Serial 30DVS-103-30, Photo Spindle Sander at its Right Side Photo Spindle Sander at its Right Side.
CLICK HERE FOR PHOTO  max 30DVS combination 30 inch diameter discs sander30-D and  independent spindle sander VS-1, both with tilt tables, motor drives 5 hp disc and 1 hp spindle, Serial 30DVS-103-30, Photo Side over-all view. Photo Side over-all view.




30" diameter disc MAX Combination Disc and Spindle Sander
 Model 30-DVS
 Disc Sander 30-D
has tilting table and has rise and fall vertical movement
 Table working surface 15" x 38.5"
 Disc Motor Dive  5 hp
 Spindle Sander VS-1
with Oscillating Spindle and  Tilt Table
     Table working surface 24" x 24"
     Tilts 10
up and 45 down
 
Spindle Motor Drive for both units 1 hp.
Inventory Reference S0453 - S0403-9538  CLICK HERE FOR QUOTATION  max combination 30 inch diameter disc and  independent spindle sander_model 30DVS_disc model 30-SD_spindle model  VS-1_motors drive 5 hp disc and motor drive 1 hp spindle_date  Mfg 1994_Serial 94312  CLICK HERE FOR PHOTO  max combination 30 inch diameter discs sander and  independent spindle sander_model 30 DVS_both with tilt tables_motor drives 5 hp disc and 1 hp spindle_disc model 30-SD_Spindle model VS1_tilting tables Photo







DRUM SANDERS     S0403-


Sorry we are out of stock, but Call Us we do have a data base of customers who just might have what you are looking for.

We are looking to buy one machine or entire manufacturing facility, 
PLEASE Fax or Email us your needs or what you have For-Sale
    Telephone:  1-213-627-2847
    Fax:   1-213-627-2499
    Email:  sales@centurymachinery.com







SPINDLE SANDERS    S0403-

TWO MAX Heavy Duty Oscillating SPINDLE SANDER (In stock)
                                                   

MAX OSCILLATING SPINDLE SANDER

   Model VS-1  Heavy Duty
TILTING TABLE:
Size 24" x 24"
     
Forward 45 degrees
MOTOR DRIVE 1 H.P
BOTH Sanders EQUIPPED WITH:
    
SPINDLES with Rubber Sleeve
       (1) 3/4" dia. x 9" long Spindles with 4" dia rubber sleeve
       (
1) 3/4" dia. x 9" long Spindles with 3" dia rubber sleeve
       (1) 3/4" dia. x 9" long Spindles with 2" dia rubber sleeve
       (1) 3/4" dia. x 9" long Spindles with 1" dia rubber sleeve
     
SPINDLES:   (1) 3/4" dia. x 9" long Spindles      (1) 3/4" dia. x 6" long Spindles
       (1) 3/8" dia. x 5⅞ long Spindle      (1) 1/4" dia. x 4-11/16 long Spindle
       (2) Table insert plated

Inventory Reference S0403-10309
CLICK HERE FOR QUOTATION  MAX SINGLE OSCILLATING SPINDLE SANDER, Model VS-1 Heavy Duty, TILTING TABLE: Size 24" x 24", MOTOR DRIVE 1 H.P, Equipped with Rubber Sleeve, (1) 3/4" dia. x 9" long Spindles with 4" dia rubber sleeve, (1) 3/4" dia. x 9" long Spindles with 3" dia rubber sleeve, (1) 3/4" dia. x 9" long Spindles with 2" dia rubber sleeve, (1) 3/4" dia. x 9" long Spindles with 1" dia rubber sleeve, SPINDLES (1) 3/4" dia. x 9" long, Spindles, (1) 3/4" dia. x 6" long Spindles, (1) 3/8" dia. x 5⅞ long Spindle, (1) 1/4" dia. x  4-11/16 long Spindle, (2) Table insert plated, Serial VS-2732
Inventory Reference S0403-10313  CLICK HERE FOR QUOTATION  MAX SINGLE OSCILLATING SPINDLE SANDER, Model VS-1 Heavy Duty, TILTING TABLE: Size 24" x 24", MOTOR DRIVE 1 H.P, Equipped with Rubber Sleeve, (1) 3/4" dia. x 9" long Spindles with 4" dia rubber sleeve, (1) 3/4" dia. x 9" long Spindles with 3" dia rubber sleeve, (1) 3/4" dia. x 9" long Spindles with 2" dia rubber sleeve, (1) 3/4" dia. x 9" long Spindles with 1" dia rubber sleeve, SPINDLES (1) 3/4" dia. x 9" long, Spindles, (1) 3/4" dia. x 6" long Spindles, (1) 3/8" dia. x 5⅞ long Spindle, (1) 1/4" dia. x  4-11/16 long Spindle, (2) Table insert plated, Serial VS-3195



JET
OSCILLATING SPINDLE SANDER

   Model OVS-10   Stock 70B410   Heavy Duty
TILTING TABLE:
Size 24-5/16" x 24-5/16"
     
Forward 45 degrees
MOTOR DRIVE 1 H.P.115 volts
EQUIPPED WITH:
     SPINDLES only:
       
(1) 1/4" diameter x 4" long.        (1) 1/2" diameter x 6" long.
        (1) 3/4" diameter x 9" long.
        (1) 3/4" diameter x 9" long with threads for compressions nut.
     SPINDLES with RUBBER SLEEVES:
       
(1) 2" diameter Rubber Sleeve w/ 3/4" dia x 9" long Spindle.
        (1) 3" diameter Rubber Sleeve w/ 3/4" dia x 9" long Spindle.
        (1) 4" diameter Rubber Sleeve w/ 3/4" dia x 9" long Spindle.
     RUBBER SLEEVES:
      
  (1) 3" dia. x 9" long.  (1) 4" dia. x 9" long

Inventory Reference S0403-10282
CLICK HERE FOR QUOTATION JET VERTICAL OSCILLATING SPINDLE SANDER, Model OVS-10, Stock 70B410, Spindle Speed 1725 rpm, Oscillating 75 strokes per minute, Length of Oscillation 1", Tilting Table 24-5/16" x 24-5/16", Tilting 45 degrees, MOTOR DRIVES 1 H.P.115 volts, EQUIPPED WITH SPINDLES only (1) 1/4" diameter x 4" long,  (1) 1/2" diameter x 6" long, (1) 3/4" diameter x 9" long, (1) 3/4" diameter x 9" long with threads for compressions nut, SPINDLES with RUBBER SLEEVES (1) 2" diameter Rubber Sleeve w/ 3/4" dia x 9" long Spindle, (1) 3" diameter Rubber Sleeve w/ 3/4" dia x 9" long Spindle, (1) 4" diameter Rubber Sleeve w/ 3/4" dia x 9" long Spindle, RUBBER SLEEVES (1) 3" dia. x 9" long, (1) 4" dia. x 9" long, Serial Number 401016



OLIVER Manual & Power TILTING SPINDLE SANDER
   Model 381-DM   HEAVY DUTY
OSCILLATING
POWER TILTING SPINDLE: Forward 45 degrees
                                                  Backward 5 degrees
SPINDLE SHAFT SIZE: 1 diameter x 9
      with 6 diameter rubber sleeve.
TABLE SIZE 37 x 37
SPINDLE DRIVE: 1 H.P.
TILTING SPINDLE DRIVE 1/4 hp.

Inventory Reference S0403-15840 
CLICK HERE FOR QUOTATION  jet oscillating vertical spindle sander_model JOVS-10_tilting table 24 inch x 24 inch_spindle strokes 75 spm_motor drive 1 hp 115 volts_Stock 708411_Serial 2103164



two in stock

             
 ▼

CHECK OUT PHOTOS
THIS SANDER HAS BEEN fully reconditioned July 3, 2015
▼ 
                                                                                          

MAX Combination Spindle Sander and 30" diameter disc Disc SANDER
 Model 30-DVS
Spindle Sander
VS-1 with Oscillating Spindle and  Tilt Table
     Table working surface 24" x 24"
     Tilts 10
up and 45 down
 
Spindle Motor Drive for both units 1 hp.

 Disc Sander
30-D has tilting table and has rise and fall vertical movement
 Table working surface 15" x 38.5"
 Disc Motor Dive  5 hp

Inventory Reference S0453- S0403-9203  CLICK HERE FOR QUOTATION  max 30DVS combination 30 inch diameter discs sander30-D and  independent spindle sander VS-1, both with tilt tables, motor drives 5 hp disc and 1 hp spindle, Serial 30DVS-103-30
CLICK HERE FOR PHOTO  max 30DVS combination 30 inch diameter discs sander30-D and  independent spindle sander VS-1, both with tilt tables, motor drives 5 hp disc and 1 hp spindle, Serial 30DVS-103-30, Photo right side view disc sander Photo right side view Disc Sander.        CLICK HERE FOR PHOTO  max 30DVS combination 30 inch diameter discs sander30-D and  independent spindle sander VS-1, both with tilt tables, motor drives 5 hp disc and 1 hp spindle, Serial 30DVS-103-30, Photo Spindle Sander at its Right Side Photo Spindle Sander at its Right Side.    CLICK HERE FOR PHOTO  max 30DVS combination 30 inch diameter discs sander30-D and  independent spindle sander VS-1, both with tilt tables, motor drives 5 hp disc and 1 hp spindle, Serial 30DVS-103-30, Photo Side over-all view. Photo Side over-all view.



MAX Combination Spindle Sander and 30" diameter disc Disc SANDER
 Model 30-DVS
Spindle Sander
VS-1 with Oscillating Spindle and  Tilt Table
     Table working surface 24" x 24"
     Tilts 10
up and 45 down
 
Spindle Motor Drive for both units 1 hp.

 Disc Sander
Model 30-D has tilting table and has rise and fall vertical movement
 Table working surface 15" x 38.5"
 Disc Motor Dive  5 hp

Inventory Reference S0453 - S0403-9538 CLICK HERE FOR QUOTATION  max combination 30 inch diameter disc and  independent spindle sander_model 30DVS_disc model 30-SD_spindle model  VS-1_motors drive 5 hp disc and motor drive 1 hp spindle_date  Mfg 1994_Serial 94312  CLICK HERE FOR PHOTO  max combination 30 inch diameter discs sander and  independent spindle sander_model 30 DVS_both with tilt tables_motor drives 5 hp disc and 1 hp spindle_disc model 30-SD_Spindle model VS1_tilting tables



 

PLEASE CONTACT US FOR QUOTATIONS
Phone   1-213-627-2847          Fax  1-213-627-2499  or
Email us at sales@centurymachinery.com

"THANK YOU for taking the time to visit our website"