PLANERS "ALL TYPE"
 
Link back to Home Page► www.centurymachinery.com

POINT and CLICK CATEGORIES or JUST SCROLL DOWN, CATEGORIES ARE IN ALPHABETICAL ORDER. ▬▬▬▬▬▬►

*PLANERS*
*PLANER MILLS*
*PLANERS: Openside*
*PLANERS WOODWORKING: Single Surfacers*


Servicing Industry for 83 years".

If you require a Quote Sheet PLEASE  send  us your requirements:

CENTURY logo
1937 South Santa Fe Avenue
Los Angeles, California 90021

Email: sales@centurymachinery.com
Website: www.centurymachinery.com
Telephone 1-213-627-2847

Fax 1-213-627-2499

 

PLANERS Metalworking     P1876-

Sorry we are out of stock.

We are looking to buy one machine or entire manufacturing facility, 
PLEASE Fax or Email us your needs or what you have For-Sale
    Telephone:  1-213-627-2847
    Fax:   1-213-627-2499
    Email:  sales@centurymachinery.com

PLANER MILLS     P1850-

None at this time.

 

PLANERS: Openside     P1927-

None at this time.


 

WOODWORKING PLANER,
(Single Surfacer)
P1960-

20" wide x 6" height  PARK WOODWORKING PLANER, (Single Surfacer)
   Model 20      Heavy Duty

Cutter Head 4 Knifes
Cutter Head Motor Drive Direct Connected 5 hp.
Inventory Reference P1960-9504  parks 20 inch woodworking planer single surfacer,#20 ,four knife head, 5 hp, 2-speed fd,Serial 20989    20 inch wide x 6 inch height capacity parks heavy duty woodworking planer, single surfacer, model 20, four knife head, drive 5 hp, two speed feed, Serial 20989, Photo Front-Infeed view Photo Front - Infeed view.
  20 inch wide x 6 inch height capacity parks heavy duty woodworking planer, single surfacer, model 20, four knife head, drive 5 hp, two speed feed, Serial 20989, Photo Right Side to Front-Infeed view   Photo Right Side to Front - Infeed view.
NICE WOODWORKING PLANER, RUNS GREAT and PRICED TO SELL AT $1,950.00



30" wide x 9-1/2 height  OLIVER
WOODWORKING PLANER,  (Single Surfacer)
Model 361-AD

Cutter Head 4 Knifes
Cutter Head Motor Drive Direct Connected 15 hp.
Feed Motor Drive, 3-Speeds
Table Elevation Motor hp.
Equipped with Jointer Bar.
Inventory Reference P1960-3955  30 inch oliver single surfacer planer, model 3812-AD,  9.250 in ht, ,sectional feed rolls ,4 knifes head, 20 hp ,Serial 93302.

THESE ARE PHOTOS OF ANOTHER PLANER, FOR REFERENCE ONLY
 30 inch wide capacity OLIVER WOODWORKING PLANER, Model 361-AD, SINGLE SURFACER, CAPACITY 30" width x 9" Thickness, FOUR KNIKE CUTTERHEAD, FOUR FEED RATE  20, 30 40, 60 FPM, SECTIONAL CHIPBREAKER and PRESSURE BAR,BED INCLINED: Adjusts Up/Down by Hand Wheel 8", EQUIPPED WITH Jointing Bar, Knife Grinder and Jointing Attachment, 20 H.P Cutterhead direct drive Motor Drive, Feed, Motor 1.5 / 1 /    /   H.P, Table Elevation motor  H.P, Knife Grinder motor ⅓ H.P, Photo Front-Infeed Photo Front - Infeed view.      30 inch wide capacity OLIVER WOODWORKING PLANER, Model 361-AD, SINGLE SURFACER, CAPACITY 30" width x 9" Thickness, FOUR KNIKE CUTTERHEAD, FOUR FEED RATE  20, 30 40, 60 FPM, SECTIONAL CHIPBREAKER and PRESSURE BAR,BED INCLINED: Adjusts Up/Down by Hand Wheel 8", EQUIPPED WITH Jointing Bar, Knife Grinder and Jointing Attachment, 20 H.P Cutterhead direct drive Motor Drive, Feed, Motor 1.5 / 1 /    /   H.P, Table Elevation motor  H.P, Knife Grinder motor ⅓ H.P, Photo Front to Right Side. Photo Front to Right Side.




OLIVER CYLINDER KNIFE GRINDING and JOINTING BAR HOLDING ATTACHMENT
Was on 399D Planer (Single Surfacer)            Can also be placed onto Jointer
Holder Cross Travel 26"
Vertical Slide Travel 7"
Inventory Reference T3953-9726 
oliver cylindrical knike jointing and grinding attachment holder_jointing bar_holder cross travel 26 inch_was used on 399D_Serial Number 205900_ID Number 017-621
oliver cylindrical knike jointing and grinding attachment holder_jointing bar_holder cross travel 26 inch_was used on 399D_Serial Number 205900_ID Number 017-621_Front View Front view.             oliver cylindrical knike jointing and grinding attachment holder_jointing bar_holder cross travel 26 inch_was used on 399D_Serial 205900_ID 017-621_Rear View  Rear View.            oliver cylindrical knike jointing and grinding attachment holder_jointing bar_holder cross travel 26 inch_was used on 399D_Serial 205900_ID 017-621_ID Tag  ID Tag.
     PRICED TO SELL AT $475.00



 

PLEASE CONTACT US FOR: Quotations and Photo's
Phone: 1-213-627-2847,    Fax:  1-213-627-2499, or
E-Mail us at: sales@centurymachinery.com
" THANK YOU for taking the time to visit our web site "