MISCELLANEOUS

Link back to Home Page► www.centurymachinery.com

POINT and CLICK CATEGORIES or JUST SCROLL DOWN IF HEADINGS TO NOT TRANSFER TO ITEMS
CATEGORIES ARE IN ALPHABETICAL ORDER.

*AUTOMOTIVE EQUIPMENT: Clutch Tables, Brake Shoe Grinders,
Crankshaft Grinders & Riveters
*
*
AIR FILTER / BLOWERS*
*
BALANCER*
*BRAKE DRUM & DISC LATHE
*
*CENTER LAPPING GRINDER*
*CRIMPERS & BENDING ROTARY MACHINES*
*
DRILL BITS FOR SALE*
*ELECTRICAL DISCHARGE MACHINES    Mfg. by Elox,  & Electro Arc*
*
FREQUENCY CONVERTERS: 180 cycles thru 400 cycles*
*
GENERATOR: All Type*
*COLD HEADER*:
*COOLANT SYSTEMS*

*
HEATERS, SPACE: Portable, "New"*
*
INJECTION MOLDERS, Horizontal*
*
INJECTION MOLDER, ACCESSORIES: Chillers, Conair Hoppers &Granulators*

*
LIQUID HANDLING & STORAGE: Portable*
*MANLIFT: Self Propelled, 60' Reach*
*PAD MARKING MACHINES*
*PELLET PRESS*
*ROUTER SPINDLES HEADS: Onsrud, Louis Allis,  Ekstrom Carlson, & Marwin*
*
RUBBER MILL*
*SAND BLAST CABINETS: Dry Blast*
*SPRING COILING MACHINE*
*
SWAGER, Tube & Solid, Hydroformer, Finn*
THREAD ROLLER:
Sorry Link not working, SCROLL DOWN TO HEADING
*
TOOLING & FIXTURES*
*
TUBE END FORMING MACHINES* TUBE END FINISHING MACHINES
WATER JET CUTTING SYSTEM. 
Please scroll down to this section  (button not linked at this time.)
*
WEIGHT MEASURING UNITS*

*VIBRATORS BOWL FINISHERS*

SPECIAL 76 year in business discounted price on all items listed below.

If you require a Quote Sheet PLEASE  send  us your requirements:
CENTURY MACHINERY COMPANY
INC.
1937 South Santa Fe Avenue
Los Angeles, California 90021

Email: sales@centurymachinery.com
Website
: www.centurymachinery.com
Telephone 1-213-627-2847
Fax 1-213-627-2499


"IF YOU DON'T SEE IT, PLEASE CONTACT US"

 

AUTOMOTIVE EQUIPMENT: Clutch Tables, Brake Shoe Grinders,
Crankshaft Grinders Ref.
G4526-
 Riveters
Drum & Disc Lathe
    A8506- 




CLUTCH TABLES:
We have in-stock 5 tables some with pneumatic grippers





CRANKSHAFT GRINDERS

22" swing x 74" centers VAN NORMAN CRANKSHAFT GRINDER   Model 477TA
   
2-Axis Hand & Power Feed Table
    Longitudinal Power and Hand Feed on Grinding Wheel Head Assembly & Work Table.
    and Cross Feed Travel on Grinding Wheel Head Assembly.
    Two 8.250" diameter 3-Jaw Chuck Located on Headstock and
          Tailstock both with 4-Way Cross Slide and instantaneous Trim-A-Just feature
           Rotation Adjustment      
    (1) Radius Stone Dresser with Diamond Nib.
    (1) Grinding Stone Hubs.
    Coolant Pump
Condition: Very Little Use since REBUILT February 1983
Inventory Reference  G4526-9722  CLICK HERE FOR QUOTATION  van norman crankshaft regrinder_model 477TA_size 2_capacity 22 inch swing x 74 inch centers_power longitudinall and cross feed_two 8 inch 3-jaw chucks_trim-a-just feature_Serial 7146-1170
 


22" x 74" STORM VULCAN CRANKSHAFT GRINDER   Model 15D
   
2-Axis Hand & Power Feed Table
    Longitudinal Power and Hand Feed on Grinding Wheel Head Assembly & Work Table
    Micro-Infeed Cross Feed Travel on Grinding Wheel Head Assembly
    8" diameter 3-Jaw Chuck Reversible Top Jaws on Tailstock with Cross Slide Adjustment
Inventory Reference G4526-6912 CLICK HERE FOR QUOTATION  storm vulcan crankshaft grinder_ model 15D_ capacity 22 inch swing x 74 inch centers_maximum centers 80 inch_variable speed work head  0-200 rpm_ table and wheel head hand and power feed




C-Frame
 RIVETERS
PNEUMATIC DRIVEN AVAILABLE  Chicago Pneumatic



 

BRAKE DRUM & DISC LATHE  Ref. L1601-






 

AIR FILTER / BLOWERS  Ref. A2980-
AIR CLEANERS AND SCRUBBERS
DUST COLLECTION UNITS Ref. D8300-

MICRO AIR FILTER and FAN
Model MT800
Mounted on wheels
Motor Drive 1/4 hp. 115 volts
Inventory Reference A2980-9180 micro air filter and fan_model MT800_mounted on wheels_motor drive 0.250 hp_115 volts


 

REESE SELF CONTAINED DUST COLLECTOR
Model 5.4-60
Hopper Type
Exhaust Cubic Feet Per Minute 1100 cfm
Filter Medium Cloth Bags
Motor drive 3/4 hp 230/460 volts
Inventory Reference D8300-9536 CLICK HERE FOR QUOTATION   reese dust collector_ model 5-4-60_self contained_cubic feet per minute 1100 cfm_ filter medium cloth bages_ inlet opening 3 inch_ drive 0.75 hp_ Ser  11478-1

 

AGET DUSTKOP DUST COLLECTOR
Series 800,  Model 8N50,   Serial Number 541
CENTRIFUGAL SEPARATOR
FILTER MEDIUM: Dry Type, Wire Mesh
RATINGS, 200 TO 900 C.F.M. at 5.25” to 2” W.G
RECOMMENDED OPERATING RANGE, 300 TO 700 C.F.M. at 5.25”
With
DUST STORAGE: Pull-Out Drawer: Capacity 3.4 Cubic Feet
     
1-After Filter located on top of cyclone
      1-Section Inlet duct with Suction Shut Off 
Inventory Reference   D8300-9535-1B  CLICK HERE FOR QUOTATION  aget dustkop dust collector_ series 800_ model 8N50_ ratings 200 - 900 cfm at 5.25 inch to 2 inch MG_ with pull-out storage bin_ 0.75 hp_ Ser  541
CLICK HERE FOR PHOTO  aget dustkop dust collector_series 800_ model 8N50_ratings 200 - 900 cfm at 5.25 inch to 2 inch MG_with pull-out storage bin_drive 0.75 hp_Serial 541  CLICK HERE FOR PHOTO  aget dustkop dust collector_series 800_ model 8N50_ratings 200 - 900 cfm at 5.25 inch to 2 inch MG_with pull-out storage bin_drive 0.75 hp_Serial 541  CLICK HERE FOR PHOTO  aget dustkop dust collector_series 800_ model 8N50_ratings 200 - 900 cfm at 5.25 inch to 2 inch MG_with pull-out storage bin_drive 0.75 hp_Serial 541  CLICK HERE FOR PHOTO  aget dustkop dust collector_series 800_ model 8N50_ratings 200 - 900 cfm at 5.25 inch to 2 inch MG_with pull-out storage bin_drive 0.75 hp_Serial 541  View of unit.









 

 BALANCER   Ref. B0404-












 

CENTER LAPPING GRINDERS    Ref. L0762-

EXCELL-O CENTER LAPPING MACHINE
Model 74
CAPACITY
   Work Diameter 10½" x 31" Length
Lapping Speeds  665, 1280, 2300, 4300 rpm.
Lapping Spindle Stroke 1½"
DRESSER: Adjustable Angle
EQUIPPED WITH:
  
(1) Diamond Nib

MOTOR DRIVE: 1/2 hp. 220/440 volts
Inventory Reference L0762-9833  
CLICK HERE FOR QUOTATION  excel-o center lap machine_model 74_capacity 10.5 inch x 31 inch centers_lapping speed 665_1280_2300_4500 rpm_0.50 hp 220 volts_Serial 577
CLICK HERE FOR PHOTO:   excel-o center lap machine_model 74_capacity 10.5 inch x 31 inch centers_lapping speed 665_1280_2300_4500 rpm_0.50 hp 220 volts_Serial 577 
Over-all view.      CLICK HERE FOR PHOTO:  excel-o center lap machine_model 74_capacity 10.5 inch x 31 inch centers_lapping speed 665_1280_2300_4500 rpm_0.50 hp 220 volts_Serial 577_Stone Dresser Close up Dresser.


 

EXCELL-O CENTER LAPPING MACHINE
Model 174
CAPACITY
   Work Diameter 10½" x 38" Length
Lapping Speeds  665, 1280, 2300, 4300 rpm.
Lapping Spindle Stroke 1½"
DRESSER: Adjustable Angle 60 to 120 degrees
EQUIPPED WITH:
  
(1) Diamond Nib

MOTOR DRIVE: 1/2 hp. 115 volts, Single Phase
Inventory Reference L0762-9835 
CLICK HERE FOR QUOTATION   excel-o center lap machine_model 174_capacity 10.5 inch x 38 inch centers_lapping speed 665_ 1280_ 2300_ 4500 rpm_0.50 hp 115 volts_Serial 174-0703
CLICK HERE FOR PHOTO   excel-o center lap machine_model 174_capacity 10.5 inch x 38 inch centers_lapping speed 665_1280_2300_4500 rpm_0.50 hp 115 volts_Serial 174-0703 Over-view.   CLICK HERE FOR PHOTO  excel-o center lap machine_model 174_capacity 10.5 inch x 38 inch centers_lapping speed 665_1280_2300_4500 rpm_0.50 hp 115 volts_Serial 174-0703_Close-up Dresser Close-up Dresser.







 

CHIP WRINGER Ref. C1726-

AMERICAN TOOL & MACHINE CHIP WRINGER
Chip Pan Size 20" diameter x 10" depth
Drive 3 H.P

CLICK HERE FOR PHOTO  american tool & machine chip wringer_chip pan 20 inch diameter x 10 inch deep_rpm 1250_drive 3 hp_Serial 66-1457 Over-all view prior to unit being cleaned.
CLICK HERE FOR PHOTO  american tool & machine chip wringer_chip pan 20 inch diameter x 10 inch deep_rpm 1250_drive 3 hp_Serial 66-1457-Inside view chip pan Inside view chip pan prior to clean-up.
 Inventory Reference C1726-9756
CLICK HERE FOR QUOTATION  american tool & machine chip wringer_chip pan 20 inch diameter x 10 inch deep_rpm 1250_drive 3 hp_Serial 66-1457 



BARRETT CHIP WRINGER
Chip Pan Size 23" diameter x 15" depth
Chip Pan Capacity 2.1 cubit feet - 1.33 bushels.
Maximum Load per hour 20
Hourly  Production 42 cubit feet - 33 bushels.
Drive 6 H.P
CLICK HERE FOR PHOTO  barrett chip wringer_model 402E_chip pan 23 inch diameter x 15 inch deep_chip capacity 2.1 cu.ft-1.33 bushels_maximum load per hour 20_hourly production 42 cu.ft_max. load 225 pounds_drive 6 hp_Serial S4021050-E Over-all view prior to unit being cleaned.
CLICK HERE FOR PHOTO barrett chip wringer_model 402E_chip pan 23 inch diameter x 15 inch deep_chip capacity 2.1 cu.ft-1.33 bushels_max load per hr 20_hourly production 42 cu.ft_max. load 225 lbs_drive 6 hp_Serial S4021050-E_view inside Inside view chip pan prior to clean-up.
 Inventory Reference C1726-9755
CLICK HERE FOR QUOTATION  barrett chip wringer_model 402E_chip pan 23 inch diameter x 15 inch deep_chip capacity 2.1 cu.ft-1.33 bushels_maximum load per hour 20_hourly production 42 cu.ft_max. load 225 pounds_drive 6 hp





 

 COLD HEADERS Ref.H2325-         







 

COOLANT SYSTEMS Ref. C5761-










 

  CRIMPERS & BENDING ROTARY MACHINES  Ref. C7169-       

"NEW" Jet Rotary Machines  Model RM-22D
   
Cutting Capacity 22 gauge
    Distance between Shaft Centers 2"
    Depth of Throat 7"
    Equipped with 6 interchangeable Rolls
Inventory Reference  C7169-751022
"Photo and Specification are with-in Camera"
    
 








 

DRILL BITS FOR  SALE

We purchase a ton of  New Cobalt Drills.
    1/16" thru 3/4" diameter. Made in USA   Save Up to 60% off  New List Price.







 

 ELECTRICAL DISCHARGE MACHINES Ref. E2425-    Mfg. by Elox,
& Electro Arc
METAL DISINTEGRATOR Ref. D2827-

ELECTO ARC METAL DISINTEGRATOR
Model 1S
CAPACITY:
KVA 10
AMPS 13
TABLE SIZE  30" F-B x 39½" L-R
DISINTEGRATOR HEAD: Type Q
    Rotates Left and Right of vertical 90°.
    Head distance from column:  Minimum 10",    Maximum 36⅜"
    Head Vertical Travel by adjustment screw 9"
    Head travels on double barrel arms (Crossarms) 26⅜"
CROSSARM ADJUSTMENT: by adjustment screw 12"
COLUMN 50"
DISCHARGE HEAD Maximum height above table 34"
Inventory Reference D2875-9856
CLICK HERE FOR QUOTATION  electro arc metal disintegrator machine_model 1SQT_10 kva_13 amp_head rotates_travel in and out and vertically_coolant_Serial 1253
CLICK HERE FOR PHOTO  electro arc metal disintegrator machine_model 1S_10 kva_13 amp_head rotates_travel in and out and vertically_autofeed_coolant_mfg 86_Serial 1253 Over-all view.       CLICK HERE FOR PHOTO  electro arc metal disintegrator machine_model 1S_10 kva_13 amp_head rotates_travel in and out and vertically_autofeed_coolant_mfg 86_Serial 1253 Close-up Disintegrator Head
 








 


EXHAUST & DUST COLLECTORS Ref. D8300-

MICRO AIR FILTER and FAN
Model MT800
Mounted on wheels
Motor Drive 1/4 hp. 115 volts
Inventory Reference A2980-9180 micro air filter and fan_model MT800_mounted on wheels_motor drive 0.250 hp_115 volts



REESE SELF CONTAINED DUST COLLECTOR
Model 5.4-60
Hopper Type
Exhaust Cubic Feet Per Minute 1100 cfm
Filter Medium Cloth Bags
Motor drive 3/4 hp 230/460 volts
Inventory Reference D8300-9536 CLICK HERE FOR QUOTATION   reese dust collector_ model 5-4-60_self contained_cubic feet per minute 1100 cfm_ filter medium cloth bages_ inlet opening 3 inch_ drive 0.75 hp_ Ser  11478-1

 

AGET DUSTKOP DUST COLLECTOR
Series 800,  Model 8N50,   Serial Number 541
CENTRIFUGAL SEPARATOR
FILTER MEDIUM: Dry Type, Wire Mesh
RATINGS, 200 TO 900 C.F.M. at 5.25” to 2” W.G
RECOMMENDED OPERATING RANGE, 300 TO 700 C.F.M. at 5.25”
With
DUST STORAGE: Pull-Out Drawer: Capacity 3.4 Cubic Feet
     
1-After Filter located on top of cyclone
      1-Section Inlet duct with Suction Shut Off 
Inventory Reference  D8300-9535-1B  CLICK HERE FOR QUOTATION  aget dustkop dust collector_ series 800_ model 8N50_ ratings 200 - 900 cfm at 5.25 inch to 2 inch MG_ with pull-out storage bin_ 0.75 hp_ Ser  541
CLICK HERE FOR PHOTO  aget dustkop dust collector_series 800_ model 8N50_ratings 200 - 900 cfm at 5.25 inch to 2 inch MG_with pull-out storage bin_drive 0.75 hp_Serial 541  CLICK HERE FOR PHOTO  aget dustkop dust collector_series 800_ model 8N50_ratings 200 - 900 cfm at 5.25 inch to 2 inch MG_with pull-out storage bin_drive 0.75 hp_Serial 541  CLICK HERE FOR PHOTO  aget dustkop dust collector_series 800_ model 8N50_ratings 200 - 900 cfm at 5.25 inch to 2 inch MG_with pull-out storage bin_drive 0.75 hp_Serial 541  CLICK HERE FOR PHOTO  aget dustkop dust collector_series 800_ model 8N50_ratings 200 - 900 cfm at 5.25 inch to 2 inch MG_with pull-out storage bin_drive 0.75 hp_Serial 541  View of unit.





CINCINNATI  EXHAUST UNIT,  Model PB-12A,  Dust Collection Bin
    Motor Drive ½ hp. 115/208-230 volts Single Phase
 
Inventory Reference D8300-9130




SEVERAL OTHERS IN STOCK   Please call or Email Us your requirements.
    Telephone 1-213-627-2847
    Fax 1-213-627-2499
    Email  sales@centurymachinery.com








 

FREQUENCY CONVERTERS:
180 cycles thru 400 cycles  
Vary Large Selection  Ref. F47056-

VERY LARGE SELECTION:

MOTOR GENERATOR TYPE and SOLID STATE:
    From 4 KVA thru 30 KVA.  180 cycles.  240 cycles.  250 cycles,  300 cycles &
        400 cycles.
    
Inventory Reference  F4056-4056










 

GENERATOR: All Type  Ref. G2675 and G2760-


FAIRBANK MORSE STAND BY GENERATOR Diesel Driven  Low hours 149 hrs.
Unite Model 500T-12V
KW 465 / 535        KVA 606 / 669
AC Volts 277 / 480
Amps. 730 / 804
Hertz 56 thru 60    Rpm 1800
Three Phase
V-12 Twin Turbocharged Diesel Engine,   Model 50A6-12V
Equipped with
        Envir-Safe by Con Vault  Envir-Safe 500 gallons above ground duel tank
Inventory Reference G2675-9233  CLICK HERE FOR QUOTATION  fairbanks morse stand by diesel generator_model 500T-12V_KW 485 and 536_KVA 606 and 669_voltage 277 and 480 vac_twin turbocharged_non contact cooling system_Serial 88286FM
CLICK HERE FOR PHOTO   fairbanks morse stand by diesel generator_ model 500T-12V_ kw 485 and 536_kva 606 and 669_voltage 277 and 480 vac_ twin turbocharged_non contact cooling system_Ser 88286FM Photo Generator.   Photo Envir-Safe Diesel Storage Tank. CLICK HERE FOR PHOTO  envir safe above ground 500 gallon diesel storage tank 



LIKE NEW  Only 67 hours of use.
KOHLER POWER SYSTEM STAND BY GENERATOR Diesel Driven   Date Mfg. 2000
Fast Response Power System
Model 40RE0ZJ
44 KW       55 KVA
AC Volts 110-120 / 220  Single Phase
230 / 220 / 240 / 277- 480 volts Three Phase
Hertz 60
Single and Three Phase
Equipped with John Dear 4 cylinder Diesel Engine
   Decision Maker 3+ 16 Light Controller
   Kohler Automatic Transfer Switch
   Battery Tender Kohler Automatic Battery Charging System
   Block Heater
   Sub base 75 gallon Diesel Storage Tank
Inventory Reference G2675-9534  CLICK HERE FOR QUOTATION kohler diesel driven stand by generator_40 KW_ KVA 55_model 40REOZJ_power system_110-120-220-240 480 volts_1 and 3 - phase_actual hours used 67 hours_with power transfer switch_Serial 61108 
Photo Over-all
 
CLICK HERE FOR PHOTO  kohler diesel driven stand by generator_40 KW_KVA 55_model 40REOZJ_power system_110-120-220-240 480 volts_single and 3- phase_actual hours used 67 hours_with power transfer switch_Serial 611080     Photo Inside L-R View CLICK HERE FOR PHOTO   kohler diesel driven stand by generator_40 KW_KVA 55_model 40REOZJ_power system_110-120-220-240 480 volts_single and 3- phase_actual hours used 67 hours_with power transfer switch_Serial 611080_ L-R INSIDE VIEW
Photo Inside R-L View 
CLICK HERE FOR PHOTO kohler diesel driven stand by generator_40 KW_KVA 55_model 40REOZJ_power system_110-120-220-240 480 volts_single and 3- phase_actual hours used 67 hours_with power transfer switch_Serial 611080_R-L INSIDE VIEW      Photo Kohler Power System 70 amp. Transfer Switch CLICK HERE FOR PHOTO  kohler power system transfer switch_70 amps. part number K-566341-70_100B_ 23G_ 29V_ 34A_ 34J_ 34Z_ Serial K89500
Photo
Kohler Decision Maker 3+, 16 Light Controller and Automatic Battery Charger CLICK HERE FOR PHOTO kohler decision maker 3+_16 light controller and kohler automatic battery charger





LIKE NEW Less than 2 hours of use.   SPECIAL WEBSITE PRICE $695.00
GENERAC Wheel House PORTABLE GENERATOR  Gasoline Engine Driven
Heavy Duty        Model 01646
5500 AC Watts        8500 AC Surge Watts
AC Volts 120 / 240
Amps. 45.8 and 22.9
1 Phase.   Hertz 60
Equipped with: 120 volts  20 amps    Duplex Receptacle
     (1) 120 / 240 v. 30 amp Receptacle
     5 Gasoline Storage Tank       Pull Start
     Unite mounted on Wheel Kit
VERY LITTLE USE, LIKE NEW
Inventory Reference G2760-9507 CLICK HERE FOR QUOTATION  generac portable gas driven generator_wheel house_5500 watts_8500 surge watts_ model 01646_output 120 - 240 vac_single phase_gas engine_5 gal tank_Serial 1007989071   CLICK HERE FOR PHOTO  generac heavy duty gas driven portable generator_model 01646_output 5500 watts_8500 surge watts_120 - 240 ac volts_single phase_Serial 1007989071_Front view  Front view.
 
CLICK HERE FOR PHOTO  generac heavy duty gas driven portable generator_model 01646_output 5500 watts_8500 surge watts_120 - 240 ac volts_single phase_Serial 1007989071_Left Side to Front  Left side to Front view.      CLICK HERE FOR PHOTO  generac heavy duty gas driven portable generator_model 01646_output 5500 watts_8500 surge watts_120 - 240 ac volts_single phase_Serial 1007989071_Right Side to Front Right side to Front view.
 CLICK HERE FOR PHOTO  generac heavy duty gas driven portable generator_model 01646_output 5500 watts_8500 surge watts_120 - 240 ac volts_single phase_Serial 1007989071_Rear view Rear view.












HEATERS, SPACE: Portable "New"  Ref. H3400-

DAYTON Portable   150,000 BTU   Fuel: Kerosene      Model 3E219C
    Blower 115 volts    Mounted on Cart     List Price $628.44
OUR PRICE $300.00
Inventory Reference H3400-8903 CLICK HERE FOR PHOTO   dayton portable heater_model 3E219C_ 150000 BTU_ fuel type kerosene, powere required 115 volts_ mounted on cart








LIQUID HANDLING: Portable

LIQUID STORAGE TANK
Capacity 200 gallons

with: Beam Scale and Viking Pump.
All mounted on wheeled cart
Inventory Reference S7520-9128











MAN LIFT: Self Propelled,60' Reach   Ref.M0798-

MARKLIFT  MAN LIFT   Boom Height Extended to 60 Feet
Self Propelled
Working height 66 feet
Boom Lowered 76"
Capacity 500 lbs.
Turning Radius Inside 98"
Turret Rotation Continuous
Two (2) Wheel Drive
Platform Dimensions 48" x 30" x 41"
"Less than 463 hours of use"    New Cost $54,000.00
Our Price $15,500.00
Inventory Reference M0798-7059  CLICK HERE FOR QUOTATION   marklift self porpelled boom man lift_ model 601_ boom extends out to 60 fee_ platform 48 inch x 30 inch_two wheel drive_ Ser 391M5408 CLICK HERE FOR PHOTO  marklift self porpelled boom man lift_ model 601_ boom extends out to 60 fee_ platform 48 inch x 30 inch_two wheel drive_ Ser 391M5408










 

PAD MARKING MACHINES   Ref. M0753-

We have two in stock.

MONODE (HANKY ) PAD MARKING MACHINE,  Model HA-125SA

Mfg. 1996
Printing Area 3" x 6"
Steel Cliche 4" x  4"      Very Little Use
Inventory Reference  M0753-6834 CLICK HERE FOR QUOTATION: monode, hanky pad marking machines model HA-125SE, mfg. 1996, steel cliche 4 inch square, die pad 2 inch x 7.85 inch, 2-doctor blade, Ser.85-5146
CLICK HERE FOR PHOTO: monroe  hanky pad marking machine, model HA-125SE, steel cliche 4 inch x 4 inch, printing area 3 inch x 6 inch , mfg 1996, like new,  Ser. 85-5146  FRONT VIEW  CLICK HERE FOR PHOTO: monode, hanky pad marking machines model HA-125SE, mfg. 1996, steel cliche 4 inch square, die pad 2 inch x 7.85 inch, 2-doctor blade, Ser.85-5146 Close-up pad making area  CLICK HERE FOR PHOTO: monode, hanky pad marking machines model HA-125SE, mfg. 1996, steel cliche 4 inch square, die pad 2 inch x 7.85 inch, 2-doctor blade, Ser.85-5146 Left Side View Pad Marking Area  CLICK HERE FOR PHOTO: monode, hanky pad marking machines model HA-125SE, mfg. 1996, steel cliche 4 inch square, die pad 2 inch x 7.85 inch, 2-doctor blade, Ser.85-5146 Right side view  CLICK HERE FOR PHOTO: monode, hanky pad marking machines model HA-125SE, mfg. 1996, steel cliche 4 inch square, die pad 2 inch x 7.85 inch, 2-doctor blade, Ser.85-5146 Close up Controls right side  CLICK HERE FOR PHOTO: monode, hanky pad marking machines model HA-125SE, mfg. 1996, steel cliche 4 inch square, die pad 2 inch x 7.85 inch, 2-doctor blade, Ser.85-5146 Left side view  CLICK HERE FOR PHOTO: monode, hanky pad marking machines model HA-125SE, mfg. 1996, steel cliche 4 inch square, die pad 2 inch x 7.85 inch, 2-doctor blade, Ser.85-5146 Stroke adjustment



MONODE (HANKY ) PAD MARKING MACHINE,  Model HA-125SA
Mfg. 1996
Printing Area 3" x 6"
Steel Cliche 4" x  4"      Very Little Use
Inventory Reference M0753-6835 CLICK HERE FOR QUOTATION: monode, hanky pad marking machines model HA-125SE, mfg. 1996, steel cliche 4 inch square, die pad 2 inch x 7.85 inch, 2-doctor blade, Ser.85-5147
CLICK HERE FOR PHOTO: monode, hanky pad marking machines model HA-125SE, mfg. 1996, steel cliche 4 inch square, die pad 2 inch x 7.85 inch, 2-doctor blade, Ser.85-5147  Front View  CLICK HERE FOR PHOTO: monode, hanky pad marking machines model HA-125SE, mfg. 1996, steel cliche 4 inch square, die pad 2 inch x 7.85 inch, 2-doctor blade, Ser.85-5147 Close Up Pad Marking  Area  CLICK HERE FOR PHOTO: monode, hanky pad marking machines model HA-125SE, mfg. 1996, steel cliche 4 inch square, die pad 2 inch x 7.85 inch, 2-doctor blade, Ser.85-5147 Left view pad area  CLICK HERE FOR PHOTO: monode, hanky pad marking machines model HA-125SE, mfg. 1996, steel cliche 4 inch square, die pad 2 inch x 7.85 inch, 2-doctor blade, Ser.85-5147 Right side view  CLICK HERE FOR PHOTO: monode, hanky pad marking machines model HA-125SE, mfg. 1996, steel cliche 4 inch square, die pad 2 inch x 7.85 inch, 2-doctor blade, Ser.85-5147 Close up Controls right side  CLICK HERE FOR PHOTO: monode, hanky pad marking machines model HA-125SE, mfg. 1996, steel cliche 4 inch square, die pad 2 inch x 7.85 inch, 2-doctor blade, Ser.85-5147 Left side view  CLICK HERE FOR PHOTO: monode, hanky pad marking machines model HA-125SE, mfg. 1996, steel cliche 4 inch square, die pad 2 inch x 7.85 inch, 2-doctor blade, Ser.85-5147 Stroke adjustment






 

PELLET PRESS  Ref. P0875-

BIPEC PELLETIZER PRESS    Model S-O 7994
Size Pellets 1-5/16 Diameter x 1/2" thick
Capacity Tons 35
Dual Compression Cylinders
Material Hopper thru top of compression cylinders
Hydraulic Pump Motor Drive 10 hp
Inventory Reference P0875-5637 CLICK HERE FOR QUOTATION: bipec pelletizer, capacity 35 tons, pelLet size 1.3125 inch diameter x 0.50 inch thick, compresses two pellets at a time, serial number 1052  S-O 7994  CLICK HERE FOR PHOTO: bipec pelletizer, capacity 35 tons, pelet size 1.3125 inch diameter x .50 inch thick, two pelets, serial number 1052











 

RUBBER MILL  Ref. M3098-











 

 ROUTER SPINDLES  HEADS: Onsrud, Louis Allis,
Ekstrom Carlson& Marwin

ONSRUD Louis Allis Router Spindle (Head)  5 hp, and 8 hp,  15,000 rpm.
                 240 and 250 cycles,    Model 135-437 and  CTX.

 
ONSRUD Router Spindle  (Head), 12½ hp,  11,200 rpm,  180 cycles,  220 volts.


EKSTROM CARLSON Router Spindle (Head,)
5 Hp, 15,000 rpm,  250 cycle.

MARWIN  Router Spindle 15/10/9 hp,  Three Speed Ranges 5,200 / 8750 / 10,400 rpm
.

PLEASE GO TO ROUTER SECTION TO VIEW OUR INVENTORY OF ROUTERS.








 

SAND BLAST CABINETS: Dry Blast   Ref. S0253-
Cabinet Type,    Walk-in Type,  and  Stand Alone Blasters Ref. B2754-  

"NEW" SHANG PO SAND BLAST CABINET
Opening 14" x 15"
Inside 19" x 30"
Equipped with Filter Bag System
Inventory Reference S0253-6836 CLICK HERE FOR QUOTATION: shang po dry sand blasting cabinet machine, inside 30 inch L-R x 19.5 inch F-B x 20 inch height, with side opening and cloth filter bags, ID1997-A44, NEW CLICK HERE FOR PHOTO: shang po dry sand blasting cabinet machine, inside 30 in. lr x 19.5 in. fb x 20 in. ht, with side opening and cloth filter bags, NEW






 

SWAGING MACHINE  Ref. S8650-







SPRING COILING MACHINE  Ref. W6454







 

  THREAD ROLLER T2520-





 

TOOLING & FIXTURES

"We have a large selection of tooling, Please go to Tooling Section."

View Photo of only 2 section of our Tooling Crib.     








 

TUBE END FORMING MACHINES  T6554-
TUBE END FINISHING MACHINES  T6502-

Two IN-STOCK
CLARK & LEWIS TUBE END FINISHING MACHINES
Model 2SD-3     Mfg. 1992
Capacity Flaring, Square & Deburring 1/8" thru 2" OD
Spindle Speed -Two 600 or 1500 rpm
Pneumatic Automatic Jaw Closer.
Inventory Reference T6502-9804 
CLICK HERE FOR QUOTATION   clark & lewis power tube finisher_model 2SD-3_capacity 0.125 inch thru 2 inch OD_flaring_square & deburring_bead_auto jaw close_drive 0.50 hp. 110 volts_Mfg 1992_Serial 1283  CLICK HERE FOR PHOTO  clark & lewis power tube finisher_model 2SD-3_capacity 0.125 inch thru 2 inch OD_flaring_square & deburring_bead_auto jaw close_drive 0.50 hp. 110 volts_Mfg 1992_Serial 1283_Clamp End view Clamp End view.  CLICK HERE FOR PHOTO  clark & lewis power tube finisher_model 2SD-3_capacity 0.125 inch thru 2 inch OD_flaring_square & deburring_bead_auto jaw close_drive 0.50 hp. 110 volts_Mfg 1992_Serial 1283_Over all view Side view.
                                   T6502-9805 
CLICK HERE FOR QUOTATION  clark & lewis power tube finisher_model 2SD-3_capacity 0.125 inch thru 2 inch_flaring_square & deburring_bead_auto jaw close_drive 0.50 hp. 110 volts_Mfg 1992_Serial 1284  CLICK HERE FOR PHOTO  clark & lewis power tube finisher_model 2SD-3_capacity 0.125 inch thru 2 inch_flaring_square & deburring_bead_auto jaw close_drive 0.50 hp. 110 volts_Mfg 1992_Serial 1284_ Clamp end view Clamp End view.  CLICK HERE FOR PHOTO  clark & lewis power tube finisher_model 2SD-3_capacity 0.125 inch thru 2 inch_flaring_square & deburring_bead_auto jaw close_drive 0.50 hp. 110 volts_Mfg 1992_Serial 1284_Over all view Side view.


CLARK & LEWIS TUBE END FINISHING MACHINES
Model 2SD-3     Mfg. 1984
Capacity Flaring, Square & Deburring 1/8" thru 2" OD
Variable Speed 0 thru 1500
Pneumatic Automatic Jaw Closer.
Inventory Reference T6502-9806
CLICK HERE FOR QUOTATION  clark & lewis power tube finisher_model 2SD-3_capacity 0.125 inch thru 2 inch_flaring_square & deburring_bead_auto jaw close_vari speed_drive 0.50 hp. 110 volts_Mfg 1984_Serial 0427  CLICK HERE FOR PHOTO  clark & lewis power tube finisher_model 2SD-3_capacity 0.125 inch thru 2 inch_flaring_square & deburring_bead_auto jaw close_vari speed_drive 0.50 hp. 110 volts_Mfg 1984_Serial 0427_Clamp end view Clamp End view.  CLICK HERE FOR PHOTO  clark & lewis power tube finisher_model 2SD-3_capacity 0.125 inch thru 2 inch_flaring_square & deburring_bead_auto jaw close_vari speed_drive 0.50 hp. 110 volts_Mfg 1984_Serial 0427_Clamp end view_Over-all view Side view.



MANCHESTER  Three Hit TUBE END FORMER
Model M71-H-3
      Date Mfg 2001
Capacity Tube 1½" O.D
Ram Force 15 Tons     Tube Clamping Force 17.5 Tons.
Ram Cylinder: 3¼" bore x 6" stroke
Maximum Clamp Opening 1¾"
Three Position Tool Holder
Equipped with:
Allan Bradley 1500 PLC
30+ Sets of Tooling.

Safety Enclosure.
Reference T6554-9810
CLICK HERE FOR QUOTATION  manchester 3 hit tube end forming machine_model M71-H-3_capacity 1.5 inch OD_max. opening 1.75 inch_ram stroke 6 inch_clamp force 17.5 tons_ram force 15 tons_drive 15 hp_Mfg. 2001_Serial 0100-0377










WEIGHT MEASURING SCALE  M0850-

PORTABLE WEIGHT MEASURING SCALES

HYDRA TEST WEIGHT MEASURING SCALE    Model F
 Capacity 100,000 lbs
This scale can be used to measure weight from Overhead Crane  Fork Lift.
Inventory Reference M0850-3864   CLICK HERE FOR QUOTATION  hydra set portable weight measuring hanging scale_ capacity 100000 pounds_ model F_ to weight material from overhead, such as a crane_  Ser A50-101 CLICK HERE FOR PHOTO hydra set portable weight measuring hanging scale_model F_capacity 100000 pounds_to weight material from overhead_such as a crane_Serial A50-101
List Price $2,500.00
WEBSITE DISCOUNTED PRICE $999.00    








VIBRATORS BOWL FINISHERS   V2753-

SWECO  VIBRATORS BOWL FINISHER   Model FMD-10HA
Capacity
10 cubic feet
Maximum load Capacity 2,500 lbs
Diameter Bowl 45"
Maximum Part Length depending on part cross section and batch size 24"
Tub Vertical Wall. Dimensions: Width 13-7/8" x 13-5/8" Depth
Motor Drive 5 hp.
 
CLICK HERE FOR PHOTO  sweco vibration bowl finisher mill_capacity 10 cubic feet_model FMD-10HA_Serial 10FM-1269-5 Photo Finisher
Inventory Reference
V2753-19182 CLICK HERE FOR QUOTATION  sweco vibration bowl finisher mill_capacity10 cubic feet_model FMD-10HA



ROTO FINISH SPIRATRON  VIBRATORS BOWL FINISHER
  Model ST40
Capacity
40 cubic feet
Maximum load Capacity 2,500 lbs
Diameter Bowl 88"
Process Channel width 19¼"
Channel Depth 16½"
Motor Drive 10 hp.
EQUIPPED WITH: Controls with Process and Unloading Timers,
   Separation Tank and Filters
Inventory ReferenceV2753-9875



ROTO FINISH SPIRATRON  VIBRATORS BOWL FINISHER
  Model ST40
Capacity
40 cubic feet
Maximum load Capacity 2,500 lbs
Diameter Bowl 88"
Process Channel width 19¼"
Channel Depth 21"
Motor Drive 20 hp.
EQUIPPED WITH: Controls with Process and Unloading Timers,
   Separation Tank and Filters
Inventory ReferenceV2753-9551 CLICK HERE FOR QUOTATION  roto finish vibration bowl finisher mill_model ST 40_spiratron_capacity 40 cubic feet_process channel 19.250 inch_depth of channel 21 inch_outside diameter 88 inch_25 hp_Ser 715003








 

 WATER JET CUTTING SYSTEM, CNC




 

We now offer a full range of: AIRCRAFT GROUND SUPPORT EQUIPMENT
Go to Aircraft Equipment for details.
"Please E-Mail your requirements" sales@centurymachinery.com

 

IF YOU DON’T SEE IT ??
*PLEASE*
CALL   1-213-627-2847
FAX  213-627-2499 or
E-mail us at  
sales@centurymachinery.com

  

TOP $$$ PAID for
ONE MACHINE or ENTIRE PLANT
" THANK YOU for taking the time to visit our Web Site "