Link back to Home Page► www.centurymachinery.com

POINT and CLICK CATEGORIES or JUST SCROLL DOWN, LATHE CATEGORIES ARE IN ALPHABETICAL ORDER.   index ▬▬▬▬▬▬►

*BRAKE DRUM & DISC LATHE* Use Scroll Bar, Link not working on this section only.........►
*CHUCKERS*
*CNC LATHES: All Type*
*ENGINE LATHE*
*HOLLOW SPINDLE LATHE*
*HOLLOW SPINDLE, SLIDING GAP BED, OIL FIELD LATHE, Mfg. by LeBlond*
*POLISHING LATHES & BUFFERS*
*SECOND OPERATION LATHES*
*SPEED LATHES L4904-
*SPINNING LATHES*
*TOOLING & ACCESSORIES, LATHE:  MISCELLANEOUS*
*TURRET LATHES: Ram Type*
*TURRET LATHES: Saddle Type*
*WOODWORKING & PATTERN MAKER LATHES*


Serving Industry for 83 years
 

If you require a Quote Sheet PLEASE  send  us your requirements:

CENTURY logo
 
1937 South Santa Fe Avenue
Los Angeles, California 90021

Email  sales@centurymachinery.com
Website  www.centurymachinery.com
Telephone 1-213-627-2847

Fax 1-213-627-2499

 

BRAKE DRUM & DISC LATHE L1601-

Sorry we are always looking to purchase Brake Drum & Disc Lathe.
If you know of any please: Call 1213-627-2847
                                             Fax 1213-627-2499
                                             Email
sales@centurymachinery.com

 

CHUCKERL4875-










CNC LATHES, All Type  L2125- & L2150-




 Please  Email us at: sales@centurymachinery.com
    Call  1-213-627-247
    Fax  1-213-627-2499











 

ENGINE LATHES L3000- & L4304-

11" swing x 18" centers HARDINGE  ENGINE LATHE
         Super Precision
Over Cross Slide 6"
Swing Over Carriage 9"
Vari Spindle Speeds  thru 3,000 rpm
Spindle Hole Diameter 1¼"
Motor Drive 1½ hp. 220 volts, 3 Phase
Equipped with
    QUICK CHANGE BOX for Threading

    (1) Collet Closer (fast acting lever type).
    (30) Misc. sizes 5-C Collets.
    Sony Two axis DRO for Longitudinal Carriage movement and Cross Slide.
   
(1) 3" diameter Drive Plate    (1) Chase Dial.
    (1) Quick Change Tool Holder with Tool Holders & Knurling Tool
    Centers.     Coolant Pump.   Chip Pan

Inventory Reference L3000-10374  11" swing x 18" centers Hardinge Super Precision Engine Lathe, Swing Over Cross Slide 6", Swing Over Carriage 9", Vari Spindle Speeds thru 3,000 rpm, Spindle Hole 1¼", Drive 1½ hp, Equipped with Quick Change Threading, (1) 5" Four Jaw Chuck, (1) 6" Three Jaw Chuck, (1) Collet Closer (30) 5-C Collets, Sony Two axis DRO, (1) Drive Plate, (1) Chase Dial, (1) Quick Change Tool Holder with Tool Holders & Knurling Tool, Live Centers, Coolant Pump, Serial Number HLV-H-768   11" swing x 18" centers Hardinge Super Precision Engine Lathe, Swing Over Cross Slide 6", Swing Over Carriage 9", Vari Spindle Speeds thru 3,000 rpm, Spindle Hole 1¼", Drive 1½ hp, Equipped with Quick Change Threading, (1) 5" Four Jaw Chuck, (1) 6" Three Jaw Chuck, (1) Collet Closer (30) 5-C Collets, Sony Two axis DRO, (1) Drive Plate, (1) Chase Dial, (1) Quick Change Tool Holder with Tool Holders & Knurling Tool, Live Centers, Coolant Pump, Serial Number HLV-H-768, Photo Front view Photo Front.
        11" swing x 18" centers Hardinge Super Precision Engine Lathe, Swing Over Cross Slide 6", Swing Over Carriage 9", Vari Spindle Speeds thru 3,000 rpm, Spindle Hole 1¼", Drive 1½ hp, Equipped with Quick Change Threading, (1) 5" Four Jaw Chuck, (1) 6" Three Jaw Chuck, (1) Collet Closer (30) 5-C Collets, Sony Two axis DRO, (1) Drive Plate, (1) Chase Dial, (1) Quick Change Tool Holder with Tool Holders & Knurling Tool, Live Centers, Coolant Pump, Serial Number HLV-H-768, Photo Left side to Front Photo Left Side to Front.   11" swing x 18" centers Hardinge Super Precision Engine Lathe, Swing Over Cross Slide 6", Swing Over Carriage 9", Vari Spindle Speeds thru 3,000 rpm, Spindle Hole 1¼", Drive 1½ hp, Equipped with Quick Change Threading, (1) 5" Four Jaw Chuck, (1) 6" Three Jaw Chuck, (1) Collet Closer (30) 5-C Collets, Sony Two axis DRO, (1) Drive Plate, (1) Chase Dial, (1) Quick Change Tool Holder with Tool Holders & Knurling Tool, Live Centers, Coolant Pump, Serial Number HLV-H-768, Photo close-up Saddle & Compound Photo close-up Saddle & Compound.
11" swing x 18" centers Hardinge Super Precision Engine Lathe, Swing Over Cross Slide 6", Swing Over Carriage 9", Vari Spindle Speeds thru 3,000 rpm, Spindle Hole 1¼", Drive 1½ hp, Equipped with Quick Change Threading, (1) 5" Four Jaw Chuck, (1) 6" Three Jaw Chuck, (1) Collet Closer (30) 5-C Collets, Sony Two axis DRO, (1) Drive Plate, (1) Chase Dial, (1) Quick Change Tool Holder with Tool Holders & Knurling Tool, Live Centers, Coolant Pump, Serial Number HLV-H-768, Photo close-up Headstock & Carriage. Photo close-up Headstock & Carriage.    11" swing x 18" centers Hardinge Super Precision Engine Lathe, Swing Over Cross Slide 6", Swing Over Carriage 9", Vari Spindle Speeds thru 3,000 rpm, Spindle Hole 1¼", Drive 1½ hp, Equipped with Quick Change Threading, (1) 5" Four Jaw Chuck, (1) 6" Three Jaw Chuck, (1) Collet Closer (30) 5-C Collets, Sony Two axis DRO, (1) Drive Plate, (1) Chase Dial, (1) Quick Change Tool Holder with Tool Holders & Knurling Tool, Live Centers, Coolant Pump, Serial Number HLV-H-768, Photo close-up DRO & Speed Controls Photo close-up DRO & Speed Controls.



"New"
  HARDINGE POWER COLLET CLOSER

Collet type 5C
Capacity   Round stock 1-1/16"   Hexagon stock 7/8"    Square stock 3/4"
Equipped with  Power Unit
          Spindle Collet Holder Tube Assembly
Inventory Reference T3980-9444 CLICK HERE FOR QUOTATION  hardinge power  5-C collet attachment_capacity 1.0625 inch round_0.75 inch square_0.875 hexagon_condition new_Number AU6_ ID Number 1039483
List Price $1850.00
WEBSITE DISCOUNTED PRICE $989.00 



12½" swing x 20" centers
MONARCH ENGINE
LATHE
         Model EE,      

ORIGINALLY REBUILT 9- 29-1994 and then RETROFITTED January 2016 with SOLD STATE CONTROLS

Swing Over Cross Slide 7¼"
Vari Spindle Speeds  thru 4,000 rpm
Spindle Hole Diameter 1-13/22"
Motor Drive 5 hp. 460 volts, 3 Phase
Equipped with
   
S
OLID STATE SPINDLE DRIVE
    Taper Attachment.
   
(1)
8" Three Jaw Chuck, two piece top jaws.
    (1) 6" Six Jaw Chuck
two piece top jaws. .
   
(1) 5" diameter Drive Plate    (1) Chase Dial.
    (1) Quick Change Tool Holder.    Live & Dead Centers.
    Coolant Pump.   Chip Pan

Inventory Reference L3000-10167   CLICK HERE FOR QUOTATION  12½" swing x 20" center monarch EE engine lathe, model EE, swing 315mm x 510mm center, solid state variable spindle speed thru 2,750 rpm, electric lead screw, drive 5 hp, taper attachment, cushman 8 inch diameter three jaw chuck, buck 6 inch diameter six jaw chuck, face plate, drive plate, tool holder, chase dial, live and dead centers, coolant pump, original rebuilt and retrofitted new drive 9-29-94, New solid stated drive  installed 1-2016, Serial 49053

CLICK HERE FOR PHOTO  monarch engine lathe, model EE, capacity swing 12.5 inch x 20 inch centers, swing 315mm x 510mm center, solid state variable spindle speed thru 2,750 rpm, electric lead screw, drive 5 hp, taper attachment, cushman 8 inch diameter three jaw chuck, buck 6 inch diameter six jaw chuck, face plate, drive plate, tool holder, chase dial, live and dead centers, coolant pump, original rebuilt and retrofitted new drive 9-29-94, New solid stated drive  installed 1-2016, Serial 49053, Photo Front view Photo Front.      CLICK HERE FOR PHOTO monarch engine lathe, model EE, capacity swing 12.5 inch x 20 inch centers, swing 315mm x 510mm center, solid state variable spindle speed thru 2,750 rpm, electric lead screw, drive 5 hp, taper attachment, cushman 8 inch diameter three jaw chuck, buck 6 inch diameter six jaw chuck, face plate, drive plate, tool holder, chase dial, live and dead centers, coolant pump, original rebuilt and retrofitted new drive 9-29-94, New solid stated drive  installed 1-2016, Serial 49053, Photo Front to Tailstock End Photo Front to Tailstock End.
         CLICK HERE FOR PHOTO monarch engine lathe, model EE, capacity swing 12.5 inch x 20 inch centers, swing 315mm x 510mm center, solid state variable spindle speed thru 2,750 rpm, electric lead screw, drive 5 hp, taper attachment, cushman 8 inch diameter three jaw chuck, buck 6 inch diameter six jaw chuck, face plate, drive plate, tool holder, chase dial, live and dead centers, coolant pump, original rebuilt and retrofitted new drive 9-29-94, New solid stated drive  installed 1-2016, Serial 49053, Photo Headstock End to Front view Photo Headstock End to Front view.
CLICK HERE FOR PHOTO monarch engine lathe, model EE, capacity swing 12.5 inch x 20 inch centers, swing 315mm x 510mm center, solid state variable spindle speed thru 2,750 rpm, electric lead screw, drive 5 hp, taper attachment, cushman 8 inch diameter three jaw chuck, buck 6 inch diameter six jaw chuck, face plate, drive plate, tool holder, chase dial, live and dead centers, coolant pump, original rebuilt and retrofitted new drive 9-29-94, New solid stated drive  installed 1-2016, Serial 49053, Photo Close-Up Chuck - Carriage - Steady Rest - Tailstock. Photo Close-Up Chuck - Carriage - Steady Rest - Tailstock.
        CLICK HERE FOR PHOTO monarch engine lathe, model EE, capacity swing 12.5 inch x 20 inch centers, swing 315mm x 510mm center, solid state variable spindle speed thru 2,750 rpm, electric lead screw, drive 5 hp, taper attachment, cushman 8 inch diameter three jaw chuck, buck 6 inch diameter six jaw chuck, face plate, drive plate, tool holder, chase dial, live and dead centers, coolant pump, original rebuilt and retrofitted new drive 9-29-94, New solid stated drive  installed 1-2016, Serial 49053, Photo down view Chuck - Carriage - Steady Rest - Tailstock. Photo down view Chuck - Carriage - Steady Rest - Tailstock.
CLICK HERE FOR PHOTO monarch engine lathe, model EE, capacity swing 12.5 inch x 20 inch centers, swing 315mm x 510mm center, solid state variable spindle speed thru 2,750 rpm, electric lead screw, drive 5 hp, taper attachment, cushman 8 inch diameter three jaw chuck, buck 6 inch diameter six jaw chuck, face plate, drive plate, tool holder, chase dial, live and dead centers, coolant pump, original rebuilt and retrofitted new drive 9-29-94, New solid stated drive  installed 1-2016, Serial 49053, Photo Headstock view Chuck - Carriage - Steady Rest - Tailstock. Photo Headstock view Chuck - Carriage - Steady Rest - Tailstock.
       CLICK HERE FOR PHOTO monarch engine lathe, model EE, capacity swing 12.5 inch x 20 inch centers, swing 315mm x 510mm center, solid state variable spindle speed thru 2,750 rpm, electric lead screw, drive 5 hp, taper attachment, cushman 8 inch diameter three jaw chuck, buck 6 inch diameter six jaw chuck, face plate, drive plate, tool holder, chase dial, live and dead centers, coolant pump, original rebuilt and retrofitted new drive 9-29-94, New solid stated drive  installed 1-2016, Serial 49053, Photo Tailstock down view  Steady Rest -Carriage Taper Attachment & Chuck. Photo Tailstock down view  Steady Rest -Carriage Taper Attachment & Chuck.
CLICK HERE FOR PHOTO monarch engine lathe, model EE, capacity swing 12.5 inch x 20 inch centers, swing 315mm x 510mm center, solid state variable spindle speed thru 2,750 rpm, electric lead screw, drive 5 hp, taper attachment, cushman 8 inch diameter three jaw chuck, buck 6 inch diameter six jaw chuck, face plate, drive plate, tool holder, chase dial, live and dead centers, coolant pump, original rebuilt and retrofitted new drive 9-29-94, New solid stated drive  installed 1-2016, Serial 49053, Photo Operator solid state control station Photo Operator Solid State Controls.        CLICK HERE FOR PHOTO monarch engine lathe, model EE, capacity swing 12.5 inch x 20 inch centers, swing 315mm x 510mm center, solid state variable spindle speed thru 2,750 rpm, electric lead screw, drive 5 hp, taper attachment, cushman 8 inch diameter three jaw chuck, buck 6 inch diameter six jaw chuck, face plate, drive plate, tool holder, chase dial, live and dead centers, coolant pump, original rebuilt and retrofitted new drive 9-29-94, New solid stated drive  installed 1-2016, Serial 49053, Photo Headstock end view. Photo Headstock end view.



13" swing ways / 18" swing Gap x 39½" centers EDISION GAP BED ENGINE LATHE
      Model 1340-GH
Swing Over Cross Slide 8"
12-Spindle Speeds 120 thru 2,000 rpm
Spindle Hole Diameter 1½"
Inch / Metric Feed and Threading
two Speed Motor Drive 3 &2 hp.  220 volts
Equipped with:
    (1) 8" Four Jaw Chuck, Cam Lock
   
(1) 6" Three Jaw Chuck two piece top jaws.
    (1) Steady Rest,  (1) Follow Rest,
    (1) 10" Face Plate   (1) Four Way Tool Holder.
  
 (1) Chase Dial.  (1) Dead Center,  Coolant Pump, Back Splash.
    Work Light.  Foot Brake.
Inventory Reference L3000-10429  13" swing ways, 18" swing Gap x 39½" centers EDISION GAP BED ENGINE LATHE, Model 1340-GH, Swing Cross Slide 8", 12-Spindle Speeds 120 thru 2,000 rpm, Spindle Hole 1½", inch metric, 2-Speed Motor 3 & 2 hp., With: (1) 8" Four Jaw Chuck, (1) 6" Three Jaw Chuck 2-piece top jaws. (1) Steady Rest, (1) Follow Rest, (1) Face Plate, (1) 4-Way Tool Holder, (1) Chase Dial, (1) Dead Center, Coolant Pump  13" swing ways, 18" swing Gap x 39½" centers EDISION GAP BED ENGINE LATHE, Model 1340-GH, Swing Cross Slide 8", 12-Spindle Speeds 120 thru 2,000 rpm, Spindle Hole 1½", inch metric, 2-Speed Motor 3 & 2 hp., With: (1) 8" Four Jaw Chuck, (1) 6" Three Jaw Chuck 2-piece top jaws. (1) Steady Rest, (1) Follow Rest, (1) Face Plate, (1) 4-Way Tool Holder, (1) Chase Dial, (1) Dead Center, Coolant Pump, Photo Front Photo Front.
     13" swing ways, 18" swing Gap x 39½" centers EDISION GAP BED ENGINE LATHE, Model 1340-GH, Swing Cross Slide 8", 12-Spindle Speeds 120 thru 2,000 rpm, Spindle Hole 1½", inch metric, 2-Speed Motor 3 & 2 hp., With: (1) 8" Four Jaw Chuck, (1) 6" Three Jaw Chuck 2-piece top jaws. (1) Steady Rest, (1) Follow Rest, (1) Face Plate, (1) 4-Way Tool Holder, (1) Chase Dial, (1) Dead Center, Coolant Pump, Photo Tailstock to Front
Photo Tailstock to Front.    13" swing ways, 18" swing Gap x 39½" centers EDISION GAP BED ENGINE LATHE, Model 1340-GH, Swing Cross Slide 8", 12-Spindle Speeds 120 thru 2,000 rpm, Spindle Hole 1½", inch metric, 2-Speed Motor 3 & 2 hp., With: (1) 8" Four Jaw Chuck, (1) 6" Three Jaw Chuck 2-piece top jaws. (1) Steady Rest, (1) Follow Rest, (1) Face Plate, (1) 4-Way Tool Holder, (1) Chase Dial, (1) Dead Center, Coolant Pump, Photo Left end to Front Photo Left End to Front.
13" swing ways, 18" swing Gap x 39½" centers EDISION GAP BED ENGINE LATHE, Model 1340-GH, Swing Cross Slide 8", 12-Spindle Speeds 120 thru 2,000 rpm, Spindle Hole 1½", inch metric, 2-Speed Motor 3 & 2 hp., With: (1) 8" Four Jaw Chuck, (1) 6" Three Jaw Chuck 2-piece top jaws. (1) Steady Rest, (1) Follow Rest, (1) Face Plate, (1) 4-Way Tool Holder, (1) Chase Dial, (1) Dead Center, Coolant Pump, Photo down view Carriage Photo down view Carriage.



13" swing x 40" centers TURNMASTER ENGINE LATHE

Swing Over Cross Slide
7"
16-Spindle Speeds 45 thru 1,800 rpm
Spindle Hole Diameter 1½"
Inch / Metric Feed and Threading
two Speed Motor Drive 1½ hp.
Equipped with:
    Taper Attachment.
   
(1)
6" Three Jaw Chuck two pies top jaws.
    (1) 8" Drive Plate   (1) Aloris Quick Change Tool Holder.
  
 (1) Chase Dial.  Coolant Pump, Back Splash.
    Work Light.  Foot Brake.
Inventory Reference L3000-10393  13" swing x 40" centers TURNMASTER ENGINE LATHE, Swing Over Cross Slide 7", 16-Spindle Speeds 45 thru 1,800 rpm, Spindle Hole 1½", Inch Metric Feed & Threading, 2-Speed drive 1½ hp,  Equipped with Taper Attachment, (1) 6" Three Jaw Chuck 2-piece top jaws, (1) 8" Drive Plate, (1) Quick Change Tool Holder, (1) Chase Dial, Coolant Pump, Serial 130F08850259  13" swing x 40" centers TURNMASTER ENGINE LATHE, Swing Over Cross Slide 7", 16-Spindle Speeds 45 thru 1,800 rpm, Spindle Hole 1½", Inch Metric Feed & Threading, 2-Speed drive 1½ hp,  Equipped with Taper Attachment, (1) 6" Three Jaw Chuck 2-piece top jaws, (1) 8" Drive Plate, (1) Quick Change Tool Holder, (1) Chase Dial, Coolant Pump, Serial 130F08850259, Photo Front view Photo Front.
13" swing x 40" centers TURNMASTER ENGINE LATHE, Swing Over Cross Slide 7", 16-Spindle Speeds 45 thru 1,800 rpm, Spindle Hole 1½", Inch Metric Feed & Threading, 2-Speed drive 1½ hp,  Equipped with Taper Attachment, (1) 6" Three Jaw Chuck 2-piece top jaws, (1) 8" Drive Plate, (1) Quick Change Tool Holder, (1) Chase Dial, Coolant Pump, Serial 130F08850259, Photo Left side to Front view Photo Left Side to Front.    13" swing x 40" centers TURNMASTER ENGINE LATHE, Swing Over Cross Slide 7", 16-Spindle Speeds 45 thru 1,800 rpm, Spindle Hole 1½", Inch Metric Feed & Threading, 2-Speed drive 1½ hp,  Equipped with Taper Attachment, (1) 6" Three Jaw Chuck 2-piece top jaws, (1) 8" Drive Plate, (1) Quick Change Tool Holder, (1) Chase Dial, Coolant Pump, Serial 130F08850259, Photo Tailstock to Chuck view Photo Tailstock to Chuck.
      13" swing x 40" centers TURNMASTER ENGINE LATHE, Swing Over Cross Slide 7", 16-Spindle Speeds 45 thru 1,800 rpm, Spindle Hole 1½", Inch Metric Feed & Threading, 2-Speed drive 1½ hp,  Equipped with Taper Attachment, (1) 6" Three Jaw Chuck 2-piece top jaws, (1) 8" Drive Plate, (1) Quick Change Tool Holder, (1) Chase Dial, Coolant Pump, Serial 130F08850259, Photo down view Chuck to Tailstock Photo down view Chuck to Tailstock.    13" swing x 40" centers TURNMASTER ENGINE LATHE, Swing Over Cross Slide 7", 16-Spindle Speeds 45 thru 1,800 rpm, Spindle Hole 1½", Inch Metric Feed & Threading, 2-Speed drive 1½ hp,  Equipped with Taper Attachment, (1) 6" Three Jaw Chuck 2-piece top jaws, (1) 8" Drive Plate, (1) Quick Change Tool Holder, (1) Chase Dial, Coolant Pump, Serial 130F08850259, Photo down view Compound Photo down view Compound.
13" swing x 40" centers TURNMASTER ENGINE LATHE, Swing Over Cross Slide 7", 16-Spindle Speeds 45 thru 1,800 rpm, Spindle Hole 1½", Inch Metric Feed & Threading, 2-Speed drive 1½ hp,  Equipped with Taper Attachment, (1) 6" Three Jaw Chuck 2-piece top jaws, (1) 8" Drive Plate, (1) Quick Change Tool Holder, (1) Chase Dial, Coolant Pump, Serial 130F08850259, Photo Feed Chart  Photo Feed Chart.



16.14" swing x 60" centers
REPUBLIC LAGUN GAP BED ENGINE LATHE
     Model 1660

Swing Over Cross Slide
10.4"
Swing in Gap 23"
16-Spindle Speeds 40 thru 2,000 rpm
Spindle Hole Diameter 2.07"
Inch / Metric Feed and Threading
two Speed Motor Drive 7½ / 3¾ hp.
Equipped with:
    Taper Attachment.
   
(1)
8" Three Jaw Chuck two pies top jaws.  
    (1) Steady Rest.  
 (1) Chase Dial.  Coolant Pump.
    Work Light.

      2 axis DRO on Carriage Longitudinal & Cross Feed
Inventory Reference L3000-10148  REPUBLIC LAGUN GAP BED ENGINE LATHE model 1660, capacity swing over bed 16.14" (410 mm)_swing over cross Slide 10.4” (264 mm), swing in gap 23” (264 mm), distance betweenc centers 60" (1500 mm), spindle bore diameter 2.07" (52.7 mm), spindle speeds 40 thru 2000 rpm, inch–metric threading, compound travel cross 8.66", compound rest 5.52", main motor two speed 7½ / 3¾ H.P. 440v, equipped with taper attachment, 1-chuck 8" diameter 3- two piece top jaws, 1-steady rest, 1- chase dial, coolant pump, work light, 2 axis DRO, Serial Number 16685060118
REPUBLIC LAGUN GAP BED ENGINE LATHE model 1660, capacity swing over bed 16.14" (410 mm)_swing over cross Slide 10.4” (264 mm), swing in gap 23” (264 mm), distance betweenc centers 60" (1500 mm), spindle bore diameter 2.07" (52.7 mm), spindle speeds 40 thru 2000 rpm, inch–metric threading, compound travel cross 8.66", compound rest 5.52", main motor two speed 7½ / 3¾ H.P. 440v, equipped with taper attachment, 1-chuck 8" diameter 3- two piece top jaws, 1-steady rest, 1- chase dial, coolant pump, work light, 2 axis DRO, Serial Number 16685060118, Photo Front view Photo Front View.     REPUBLIC LAGUN GAP BED ENGINE LATHE model 1660, capacity swing over bed 16.14" (410 mm)_swing over cross Slide 10.4” (264 mm), swing in gap 23” (264 mm), distance betweenc centers 60" (1500 mm), spindle bore diameter 2.07" (52.7 mm), spindle speeds 40 thru 2000 rpm, inch–metric threading, compound travel cross 8.66", compound rest 5.52", main motor two speed 7½ / 3¾ H.P. 440v, equipped with taper attachment, 1-chuck 8" diameter 3- two piece top jaws, 1-steady rest, 1- chase dial, coolant pump, work light, 2 axis DRO, Serial Number 16685060118, Photo Right End to Front view Photo Right End to Front View.
REPUBLIC LAGUN GAP BED ENGINE LATHE model 1660, capacity swing over bed 16.14" (410 mm)_swing over cross Slide 10.4” (264 mm), swing in gap 23” (264 mm), distance betweenc centers 60" (1500 mm), spindle bore diameter 2.07" (52.7 mm), spindle speeds 40 thru 2000 rpm, inch–metric threading, compound travel cross 8.66", compound rest 5.52", main motor two speed 7½ / 3¾ H.P. 440v, equipped with taper attachment, 1-chuck 8" diameter 3- two piece top jaws, 1-steady rest, 1- chase dial, coolant pump, work light, 2 axis DRO, Serial Number 16685060118, Photo Chuck and Bed Ways. Photo Chuck and Bed Ways.        REPUBLIC LAGUN GAP BED ENGINE LATHE model 1660, capacity swing over bed 16.14" (410 mm)_swing over cross Slide 10.4” (264 mm), swing in gap 23” (264 mm), distance betweenc centers 60" (1500 mm), spindle bore diameter 2.07" (52.7 mm), spindle speeds 40 thru 2000 rpm, inch–metric threading, compound travel cross 8.66", compound rest 5.52", main motor two speed 7½ / 3¾ H.P. 440v, equipped with taper attachment, 1-chuck 8" diameter 3- two piece top jaws, 1-steady rest, 1- chase dial, coolant pump, work light, 2 axis DRO, Serial Number 16685060118, Photo Carriage. Photo Carriage
REPUBLIC LAGUN GAP BED ENGINE LATHE model 1660, capacity swing over bed 16.14" (410 mm)_swing over cross Slide 10.4” (264 mm), swing in gap 23” (264 mm), distance betweenc centers 60" (1500 mm), spindle bore diameter 2.07" (52.7 mm), spindle speeds 40 thru 2000 rpm, inch–metric threading, compound travel cross 8.66", compound rest 5.52", main motor two speed 7½ / 3¾ H.P. 440v, equipped with taper attachment, 1-chuck 8" diameter 3- two piece top jaws, 1-steady rest, 1- chase dial, coolant pump, work light, 2 axis DRO, Serial Number 16685060118, Photo Steady Rest and Tailstock. Photo Steady Rest and Tailstock.




17" swing x 80" centers CLAUSING COLCHESTER ENGINE LATHE
    Model 17    Series 8000

Swing Over Cross Slide
10½"
16-Spindle Speeds 20 thru 1,600 rpm
Spindle Hole Diameter 3.0625"
Inch / Metric Feed and Threading
Speed Motor Drive 10 hp.
Equipped with:
   
(1)
12" Three Jaw Chuck two pies top jaws.  
    (1) Steady Rest.   (1) Quick Change Tool Holder
 (1) Chase Dial.
    (1) Dead Center.   Coolant Pump.
    Work Light.
Inventory Reference L3000-10401  17" swing x 80" centers CLAUSING COLCHESTER ENGINE LATHE, Model 17, Series 8000, Swing Over Cross Slide 10½", 16-Spindle Speeds 20 thru 1,600 rpm, Spindle Hole Diameter 3.0625", Inch/Metric Feed & Threading, 10 hp,  Equipped with (1) 12" Three Jaw Chuck two pies top jaws, (1) Quick Change Tool Holder, (1) Chase Dial, Coolant Pump, Serial 7-0017-00939



18.11" swing x 36¾" centers LUNAN GAP BED ENGINE LATHE
     Model LC460A
Swing Over Bed 18.11" (460mm)
Swing in Removable Gap 26½" (673,11mm)
Swing Over Cross Slide 11½" (292.1mm)
Centers 36¾" (933.45mm),   Rated Centers 39.37" (1000mm)
Spindle Speeds  26 thru 1,600 rpm
Spindle Hole Diameter 2-7/16" (61.9125mm)
English - Metric Feed & Threading
Motor Drive 7½ hp.
Equipped with:  Taper Attachment.
   
(1) Chuck
9¾" diameter 3-Jaw two piece top Jaws.
   
Taper Attachment.  (1) Chase Dial.  (1) Live Center.
    Full Chip Pan and Back Splash

Inventory Reference L3000-10360  18.11" swing x 36¾" centers LUNAN GAP BED ENGINE LATHE, Model LC460A, Swing Over Bed 18.11" (460mm), Swing in Removable Gap 26½" (673,11mm), Swing Over Cross Slide 11½" (292.1mm), Centers 36¾" (933.45mm), Rated Centers 39.37" (1000mm), Spindle Speeds 26 - 1,600 rpm, Spindle Hole Diameter 2-7/16" (61.9125mm), English - Metric Feed & Threading, Motor Drive 7½ hp, Equipped with Taper Attachment, 1-Chuck 9¾" diameter 3-Jaw two piece top Jaws, Taper Attachment, 1-Chase Dial, 1-Live Center, Full Chip Pan and Back Splash, Serial Number 469   18.11" swing x 36¾" centers LUNAN GAP BED ENGINE LATHE, Model LC460A, Swing Over Bed 18.11" (460mm), Swing in Removable Gap 26½" (673,11mm), Swing Over Cross Slide 11½" (292.1mm), Centers 36¾" (933.45mm), Rated Centers 39.37" (1000mm), Spindle Speeds 26 - 1,600 rpm, Spindle Hole Diameter 2-7/16" (61.9125mm), English - Metric Feed & Threading, Motor Drive 7½ hp, Equipped with Taper Attachment, 1-Chuck 9¾" diameter 3-Jaw two piece top Jaws, Taper Attachment, 1-Chase Dial, 1-Live Center, Full Chip Pan and Back Splash, Serial Number 469, Photo Front view Photo Front View.
18.11" swing x 36¾" centers LUNAN GAP BED ENGINE LATHE, Model LC460A, Swing Over Bed 18.11" (460mm), Swing in Removable Gap 26½" (673,11mm), Swing Over Cross Slide 11½" (292.1mm), Centers 36¾" (933.45mm), Rated Centers 39.37" (1000mm), Spindle Speeds 26 - 1,600 rpm, Spindle Hole Diameter 2-7/16" (61.9125mm), English - Metric Feed & Threading, Motor Drive 7½ hp, Equipped with Taper Attachment, 1-Chuck 9¾" diameter 3-Jaw two piece top Jaws, Taper Attachment, 1-Chase Dial, 1-Live Center, Full Chip Pan and Back Splash, Serial Number 469, Photo down view Carriage & Taper Photo down view Carriage & Taper.   18.11" swing x 36¾" centers LUNAN GAP BED ENGINE LATHE, Model LC460A, Swing Over Bed 18.11" (460mm), Swing in Removable Gap 26½" (673,11mm), Swing Over Cross Slide 11½" (292.1mm), Centers 36¾" (933.45mm), Rated Centers 39.37" (1000mm), Spindle Speeds 26 - 1,600 rpm, Spindle Hole Diameter 2-7/16" (61.9125mm), English - Metric Feed & Threading, Motor Drive 7½ hp, Equipped with Taper Attachment, 1-Chuck 9¾" diameter 3-Jaw two piece top Jaws, Taper Attachment, 1-Chase Dial, 1-Live Center, Full Chip Pan and Back Splash, Serial Number 469, Photo down view Tailstock to Chuck Photo down view Tailstock to Chuck.




19
½" swing x 54" centers LeBLOND ENGINE LATHE
Swing Over Cross Slide13"
Spindle Speeds  45 thru 1,800 rpm
Spindle Hole Diameter 1½"
Inch / Metric Feed and Threading
Motor Drive 10 hp.
Equipped with:
    Taper Attachment 
(1)
10" Three Jaw Chuck.   (1) Drive Plate.
    (1) Chase Dial.  (1) Dead Center.

Inventory Reference L3000-9989  leblond servo engine lathe, capacity 19.5 inch swing x 54 inch center, spindle hole 1.5 inch, spindle speeds 45-1800 rpm, threading in-mm, taper attachment, chuck 10 inch diameter three 2-piece top jaws,drive plate,center,micro stop,chase dial,10 hp, Serial Number 10E-317  leblond servo engine lathe, capacity 19.5 inch swing x 54 inch center, spindle hole 1.5 inch, spindle speeds 45-1800 rpm, threading in-mm, taper attachment, chuck 10 inch diameter three 2-piece top jaws,drive plate,center,micro stop,chase dial,10 hp, Serial Number 10E-317, Photo Front Tailstock to Headstock Photo Front view Tailstock to Headstock
leblond servo engine lathe, capacity 19.5 inch swing x 54 inch center, spindle hole 1.5 inch, spindle speeds 45-1800 rpm, threading in-mm, taper attachment, chuck 10 inch diameter three 2-piece top jaws,drive plate,center,micro stop,chase dial,10 hp, Serial Number 10E-317, Photo Headstock to Front Photo Headstock to Front.     leblond servo engine lathe, capacity 19.5 inch swing x 54 inch center, spindle hole 1.5 inch, spindle speeds 45-1800 rpm, threading in-mm, taper attachment, chuck 10 inch diameter three 2-piece top jaws,drive plate,center,micro stop,chase dial,10 hp, Serial Number 10E-317, Photo down view Carriage & Taper Attachment Photo down view Carriage & Taper Attachment.
          leblond servo engine lathe, capacity 19.5 inch swing x 54 inch center, spindle hole 1.5 inch, spindle speeds 45-1800 rpm, threading in-mm, taper attachment, chuck 10 inch diameter three 2-piece top jaws,drive plate,center,micro stop,chase dial,10 hp, Serial Number 10E-317, Photo down view front Chuck to Tailstock
Photo down view front Chuck to Tailstock.     leblond servo engine lathe, capacity 19.5 inch swing x 54 inch center, spindle hole 1.5 inch, spindle speeds 45-1800 rpm, threading in-mm, taper attachment, chuck 10 inch diameter three 2-piece top jaws,drive plate,center,micro stop,chase dial,10 hp, Serial Number 10E-317, Photo down view front Tailstock to Chuck Photo down view front Tailstock to Chuck.
leblond servo engine lathe, capacity 19.5 inch swing x 54 inch center, spindle hole 1.5 inch, spindle speeds 45-1800 rpm, threading in-mm, taper attachment, chuck 10 inch diameter three 2-piece top jaws,drive plate,center,micro stop,chase dial,10 hp, Serial Number 10E-317, Photo Control Cabinet at rear
Photo Control Cabinet at rear.



21" swing x 60" centers AMURA GAP BED ENGINE LATHE
      Model JIMK 530x1500

Swing In Gap 28"
Swing Over Cross Slide
13½"
13-Spindle Speeds 20 thru 1,500 rpm
Spindle Hole Diameter 3.0265"
Inch / Metric Feed and Threading
Speed Motor Drive 10.2 hp.  7
½kw
Equipped with:
   
(1)
9¾" Three Jaw Chuck two pies top jaws.   (1) 17" Face Plate.
    (1) 10" Drive Plate.   (1) Two Speed Tailstock
    (1) Four Position Tool Holder
 (1) Chase Dial.
    (1) Live Center.   Coolant Pump.
    Work Light.
Inventory Reference L3000-10394  21" swing x 60" centers AMURA GAP BED ENGINE LATHE, Model JIMK 530x1500, Swing in Gap 28", Swing Over Cross Slide 13½", 13-Spindle Speeds 20 thru 1,500 rpm, Spindle Hole Diameter 3.0265", inch / metric feed & threading, Speed Motor Drive 10.2 hp. 7½kw, Equipped with (1) 9¾" Three Jaw Chuck two pies top jaws, (1) 17" Face Plate, (1) 10" Drive Plate, (1) Two Speed Tailstock, (1) Four Position Tool Holder, (1) Chase Dial, (1) Live Center, Coolant Pump, Work Light, Serial Number 530524

 

23" swing x 126" centers LODGE & SHIPLEY HOLLOW SPINDLE  LATHE
Model 20
Swing Over Cross Slide 14½
"
24-Spindle Speeds 8 thru 451
SPINDLE THRU HOLE 9-9/16
" diameter
120-Threading & 60 Feeds
Drive motor 20 hp
Equipped with
     
Front & Rear Chucks, each
21" diameter Four Independent Jaws.
     
Taper Attachment.    1-Steady Rest Roller Type with 8" diameter hole.
      1-Steady Rest Roller Type with 8" diameter hole.
      1-Coolant Pump.
      1-Four Way Tool Holder,    Full Chip Pan.
 
Inventory Reference L4106-10406   23" swing x 126" centers LODGE & SHIPLEY HOLLOW SPINDLE LATHE Model 20, Swing Over Cross Slide 14½", 24-Spindle Speeds 8 thru 451, SPINDLE THRU HOLE 9-9/16" diameter, 120-Threading & 60 Feeds, Drive motor 20 hp, Equipped with Front & Rear Chucks, each 21" diameter Four Independent Jaws, Taper Attachment, 1-Steady Rest Roller Type with 8" diameter hole, 1-Steady Rest Roller Type with 8" diameter hole, 1-Coolant Pump,1-Four Way Tool Holder, Full Chip Pan 
 23" swing x 126" centers LODGE & SHIPLEY HOLLOW SPINDLE LATHE Model 20, Swing Over Cross Slide 14½", 24-Speeds 8 thru 451, SPINDLE THRU HOLE 9-9/16" diameter, Drive 20 hp, Equipped with Front & Rear Chucks, each 21" diameter Four Independent Jaws, Taper Attachment, 1-Steady Rest Roller Type with 8" diameter hole, 1-Steady Rest Roller Type with 8" diameter hole, 1-Coolant Pump,1-Four Way Tool Holder, Full Chip Pan, Photo Tailstock - Headstock
 Photo Tailstock to Headstock Front view.  

23" swing x 126" centers LODGE & SHIPLEY HOLLOW SPINDLE LATHE Model 20, Swing Over Cross Slide 14½", 24-Speeds 8 thru 451, SPINDLE THRU HOLE 9-9/16" diameter, Drive 20 hp, Equipped with Front & Rear Chucks, each 21" diameter Four Independent Jaws, Taper Attachment, 1-Steady Rest Roller Type with 8" diameter hole, 1-Steady Rest Roller Type with 8" diameter hole, 1-Coolant Pump,1-Four Way Tool Holder, Full Chip Pan, Photo Headstock to Tailstock Front view Photo Headstock to Tailstock Front view.     23" swing x 126" centers LODGE & SHIPLEY HOLLOW SPINDLE LATHE Model 20, Swing Over Cross Slide 14½", 24-Speeds 8 thru 451, SPINDLE THRU HOLE 9-9/16" diameter, Drive 20 hp, Equipped with Front & Rear Chucks, each 21" diameter Four Independent Jaws, Taper Attachment, 1-Steady Rest Roller Type with 8" diameter hole, 1-Steady Rest Roller Type with 8" diameter hole, 1-Coolant Pump,1-Four Way Tool Holder, Full Chip Pan, Photo Chuck on left side of Headstock Photo End view Chuck on left side of Headstock.
      23" swing x 126" centers LODGE & SHIPLEY HOLLOW SPINDLE LATHE Model 20, Swing Over Cross Slide 14½", 24-Speeds 8 thru 451, SPINDLE THRU HOLE 9-9/16" diameter, Drive 20 hp, Equipped with Front & Rear Chucks, each 21" diameter Four Independent Jaws, Taper Attachment, 1-Steady Rest Roller Type with 8" diameter hole, 1-Steady Rest Roller Type with 8" diameter hole, 1-Coolant Pump,1-Four Way Tool Holder, Full Chip Pan,, Photo rear view Headstock Photo Rear view Headstock.     23" swing x 126" centers LODGE & SHIPLEY HOLLOW SPINDLE LATHE Model 20, Swing Over Cross Slide 14½", 24-Speeds 8 thru 451, SPINDLE THRU HOLE 9-9/16" diameter, Drive 20 hp, Equipped with Front & Rear Chucks, each 21" diameter Four Independent Jaws, Taper Attachment, 1-Steady Rest Roller Type with 8" diameter hole, 1-Steady Rest Roller Type with 8" diameter hole, 1-Coolant Pump,1-Four Way Tool Holder, Full Chip Pan,, Photo rear view Tailstock to Headstock Photo rear view Tailstock to Headstock.    23" swing x 126" centers LODGE & SHIPLEY HOLLOW SPINDLE LATHE Model 20, Swing Over Cross Slide 14½", 24-Speeds 8 thru 451, SPINDLE THRU HOLE 9-9/16" diameter, Drive 20 hp, Equipped with Front & Rear Chucks, each 21" diameter Four Independent Jaws, Taper Attachment, 1-Steady Rest Roller Type with 8" diameter hole, 1-Steady Rest Roller Type with 8" diameter hole, 1-Coolant Pump,1-Four Way Tool Holder, Full Chip Pan,, Photo close-up Headstock Photo close-up front view Headstock.
23" swing x 126" centers LODGE & SHIPLEY HOLLOW SPINDLE LATHE Model 20, Swing Over Cross Slide 14½", 24-Speeds 8 thru 451, SPINDLE THRU HOLE 9-9/16" diameter, Drive 20 hp, Equipped with Front & Rear Chucks, each 21" diameter Four Independent Jaws, Taper Attachment, 1-Steady Rest Roller Type with 8" diameter hole, 1-Steady Rest Roller Type with 8" diameter hole, 1-Coolant Pump,1-Four Way Tool Holder, Full Chip Pan,, Photo close-up Headstock front Chuck Photo close-up Headstock front Chuck.      23" swing x 126" centers LODGE & SHIPLEY HOLLOW SPINDLE LATHE Model 20, Swing Over Cross Slide 14½", 24-Speeds 8 thru 451, SPINDLE THRU HOLE 9-9/16" diameter, Drive 20 hp, Equipped with Front & Rear Chucks, each 21" diameter Four Independent Jaws, Taper Attachment, 1-Steady Rest Roller Type with 8" diameter hole, 1-Steady Rest Roller Type with 8" diameter hole, 1-Coolant Pump,1-Four Way Tool Holder, Full Chip Pan,, Photo close-up Carriage Photo close-up Carriage.
23" swing x 126" centers LODGE & SHIPLEY HOLLOW SPINDLE LATHE Model 20, Swing Over Cross Slide 14½", 24-Speeds 8 thru 451, SPINDLE THRU HOLE 9-9/16" diameter, Drive 20 hp, Equipped with Front & Rear Chucks, each 21" diameter Four Independent Jaws, Taper Attachment, 1-Steady Rest Roller Type with 8" diameter hole, 1-Steady Rest Roller Type with 8" diameter hole, 1-Coolant Pump,1-Four Way Tool Holder, Full Chip Pan,, Photo close-up rear view Carriage Photo close-up rear view Carriage.   23" swing x 126" centers LODGE & SHIPLEY HOLLOW SPINDLE LATHE Model 20, Swing Over Cross Slide 14½", 24-Speeds 8 thru 451, SPINDLE THRU HOLE 9-9/16" diameter, Drive 20 hp, Equipped with Front & Rear Chucks, each 21" diameter Four Independent Jaws, Taper Attachment, 1-Steady Rest Roller Type with 8" diameter hole, 1-Steady Rest Roller Type with 8" diameter hole, 1-Coolant Pump,1-Four Way Tool Holder, Full Chip Pan,, Photo close-up rear view Taper Attachment. Photo close-up rear view Carriage with Taper Attachment.

MOVING OUT OF WAREHOUSE
and we have discounted our price:

from $28,500.00   To  $20,500.00




42
½" swing x 84" centers MONARCH HEAVY DUTY ENGINE LATHE
         
Model 36NN
Swing Over Cross Slide 33"

Spindle Speed 6 thru 303 rpm
Spindle Thru Holes 2¼"
Drive motor 25 hp
Equipped with   Hardened Bed Ways
    
Taper Attachment.      1-Chuck 36" diameter Four Independent Jaws.
     1-Face Plate 22" diameter.     1-Face Plate 32" diameter.
     1-Steady Rests Heavy Duty with 30" diameter hole.
     1-Quick Change Tool Post with Tool Holders.
     1-Chase Dial.    Coolant Pump.    Full Chip Pan.
Inventory Reference  L3000-10230 42½" swing x 84" centers MONARCH HEAVY DUTY ENGINE LATHE, Spindle Bore 2¼" diameter, spindle speeds 6 thru 303 RPM, 48-Carriage Longitudinal Feeds,56-Thread Change Range, TRAVEL Carriage Cross Slide 15", Tool Slide 7", Tail stock quil 6 MT, 20 hp drive, Equipped with Taper Attachment, 1-Chuck 36" diameter Four Independent Jaws, 1-Face Plate 22" diameter, 1-Face Plate 32" diameter, 1-Steady Rests Heavy Duty with 30" diameter hole,1-Quick Change Tool Post with Tool Holders, 1-Chase Dial, Coolant Pump, Full Chip Pan., Hardened & ground Steel Bedways, Serial Number14189
42½" swing x 84" centers MONARCH HEAVY DUTY ENGINE LATHE, SPINDLE BORE DIAMETER 2¼", SPINDLE SPEEDS: 6 thru 303 RPM, 48-CARRIAGE LONGITUDINAL FEEDS,56-THREAD CHANGES Range,TRAVEL: CARRIAGE CROSS SLIDE 15", TOOL SLIDE 7", TAIL STOCK QUILL TAPER 6 MT, 20 hp MOTOR DRIVES, EQUIPPED WITH Taper Attachment, 1-Chuck 36" diameter Four Independent Jaws, 1-Face Plate 22" diameter, 1-Face Plate 32" diameter, 1-Steady Rests Heavy Duty with 30" diameter hole,1-Quick Change Tool Post with Tool Holders, 1-Chase Dial, Coolant Pump, Full Chip Pan., Hardened & ground Steel Bedways, Serial Number14189, Photo Tailstock to Headstock front view.
Photo Tailstock to Headstock front view.    42½" swing x 84" centers MONARCH HEAVY DUTY ENGINE LATHE, SPINDLE BORE DIAMETER 2¼", SPINDLE SPEEDS: 6 thru 303 RPM, 48-CARRIAGE LONGITUDINAL FEEDS,56-THREAD CHANGES Range,TRAVEL: CARRIAGE CROSS SLIDE 15", TOOL SLIDE 7", TAIL STOCK QUILL TAPER 6 MT, 20 hp MOTOR DRIVES, EQUIPPED WITH Taper Attachment, 1-Chuck 36" diameter Four Independent Jaws, 1-Face Plate 22" diameter, 1-Face Plate 32" diameter, 1-Steady Rests Heavy Duty with 30" diameter hole,1-Quick Change Tool Post with Tool Holders, 1-Chase Dial, Coolant Pump, Full Chip Pan., Hardened & ground Steel Bedways, Serial Number14189, Photo Headstock to Tailstock front view. Photo Headstock to Tailstock front view.
42½" swing x 84" centers MONARCH HEAVY DUTY ENGINE LATHE, SPINDLE BORE DIAMETER 2¼", SPINDLE SPEEDS: 6 thru 303 RPM, 48-CARRIAGE LONGITUDINAL FEEDS,56-THREAD CHANGES Range,TRAVEL: CARRIAGE CROSS SLIDE 15", TOOL SLIDE 7", TAIL STOCK QUILL TAPER 6 MT, 20 hp MOTOR DRIVES, EQUIPPED WITH Taper Attachment, 1-Chuck 36" diameter Four Independent Jaws, 1-Face Plate 22" diameter, 1-Face Plate 32" diameter, 1-Steady Rests Heavy Duty with 30" diameter hole,1-Quick Change Tool Post with Tool Holders, 1-Chase Dial, Coolant Pump, Full Chip Pan., Hardened & ground Steel Bedways, Serial Number14189, Photo close-up Chuck and Bed Ways
Photo close-up Chuck and Bed Ways.         42½" swing x 84" centers MONARCH HEAVY DUTY ENGINE LATHE, SPINDLE BORE DIAMETER 2¼", SPINDLE SPEEDS: 6 thru 303 RPM, 48-CARRIAGE LONGITUDINAL FEEDS,56-THREAD CHANGES Range,TRAVEL: CARRIAGE CROSS SLIDE 15", TOOL SLIDE 7", TAIL STOCK QUILL TAPER 6 MT, 20 hp MOTOR DRIVES, EQUIPPED WITH Taper Attachment, 1-Chuck 36" diameter Four Independent Jaws, 1-Face Plate 22" diameter, 1-Face Plate 32" diameter, 1-Steady Rests Heavy Duty with 30" diameter hole,1-Quick Change Tool Post with Tool Holders, 1-Chase Dial, Coolant Pump, Full Chip Pan., Hardened & ground Steel Bedways, Serial Number14189, Photo close-up bed ways below & infront of chuck Photo close-up bed ways below & in-front of chuck.
42½" swing x 84" centers MONARCH HEAVY DUTY ENGINE LATHE, SPINDLE BORE DIAMETER 2¼", SPINDLE SPEEDS: 6 thru 303 RPM, 48-CARRIAGE LONGITUDINAL FEEDS,56-THREAD CHANGES Range,TRAVEL: CARRIAGE CROSS SLIDE 15", TOOL SLIDE 7", TAIL STOCK QUILL TAPER 6 MT, 20 hp MOTOR DRIVES, EQUIPPED WITH Taper Attachment, 1-Chuck 36" diameter Four Independent Jaws, 1-Face Plate 22" diameter, 1-Face Plate 32" diameter, 1-Steady Rests Heavy Duty with 30" diameter hole,1-Quick Change Tool Post with Tool Holders, 1-Chase Dial, Coolant Pump, Full Chip Pan., Hardened & ground Steel Bedways, Serial Number14189, Photo close-up Quick Change Tool Holder and Taper Attachment
Photo close-up Quick Change Tool Holder and Taper Attachment.
42½" swing x 84" centers MONARCH HEAVY DUTY ENGINE LATHE, SPINDLE BORE DIAMETER 2¼", SPINDLE SPEEDS: 6 thru 303 RPM, 48-CARRIAGE LONGITUDINAL FEEDS,56-THREAD CHANGES Range,TRAVEL: CARRIAGE CROSS SLIDE 15", TOOL SLIDE 7", TAIL STOCK QUILL TAPER 6 MT, 20 hp MOTOR DRIVES, EQUIPPED WITH Taper Attachment, 1-Chuck 36" diameter Four Independent Jaws, 1-Face Plate 22" diameter, 1-Face Plate 32" diameter, 1-Steady Rests Heavy Duty with 30" diameter hole,1-Quick Change Tool Post with Tool Holders, 1-Chase Dial, Coolant Pump, Full Chip Pan., Hardened & ground Steel Bedways, Serial Number14189, Photo end view towards Tailstock
Photo end view towards Tailstock.    42½" swing x 84" centers MONARCH HEAVY DUTY ENGINE LATHE, SPINDLE BORE DIAMETER 2¼", SPINDLE SPEEDS: 6 thru 303 RPM, 48-CARRIAGE LONGITUDINAL FEEDS,56-THREAD CHANGES Range,TRAVEL: CARRIAGE CROSS SLIDE 15", TOOL SLIDE 7", TAIL STOCK QUILL TAPER 6 MT, 20 hp MOTOR DRIVES, EQUIPPED WITH Taper Attachment, 1-Chuck 36" diameter Four Independent Jaws, 1-Face Plate 22" diameter, 1-Face Plate 32" diameter, 1-Steady Rests Heavy Duty with 30" diameter hole,1-Quick Change Tool Post with Tool Holders, 1-Chase Dial, Coolant Pump, Full Chip Pan., Hardened & ground Steel Bedways, Serial Number14189, Photo rear view Taper Attachment Photo Rear view Taper Attachment.



47" swing x 92" centers AMERICAN PACEMAKER  HEAVY DUTY ENGINE LATHE
Swing Over Cross Slide 34"

Spindle Speed Variable 6 thru 600 rpm
Spindle Thru Holes 2⅞"
US Vari Drive motor 30 hp
Equipped with   Hardened Bed Ways
    
Taper Attachment.      1-Chuck 36" diameter Four Independent Jaws.
     1-Face Plate 22" diameter.     1-Face Plate 32" diameter.
     1-Steady Rests Heavy Duty with 30" diameter hole.
     1-Quick Change Tool Post with Tool Holders.
     1-Chase Dial.    Coolant Pump.    Full Chip Pan.

Inventory Reference  L3000-10407 47" swing x 92" centers AMERICAN PACEMAKER  HEAVY DUTY ENGINE LATHE, Swing Over Cross Slide 34", Spindle Speed Variable 6 thru 600 rpm, Spindle Thru Holes 2⅞",  US Vari Drive motor 30 hp, Equipped with Hardened Bed Ways, Taper Attachment, 1-Chuck 36" diameter Four Independent Jaws, 1-Face Plate 22" diameter, 1-Face Plate 32" diameter, 1-Steady Rests Heavy Duty with 30" diameter hole, 1-Quick Change Tool Post with Tool Holders, 1-Chase Dial, Coolant Pump, Full Chip Pan,  Serial Number14189
MOVING OUT OF WAREHOUSE and we have discounted our price:
      from $29,500.00     To  $18,500.00





 

 HOLLOW SPINDLE  LATHE  L4106-  SLIDING GAP BED LATHE L3224





 HOLLOW SPINDLE  LATHE  L4106-

23" swing x 126" centers LODGE & SHIPLEY HOLLOW SPINDLE  LATHE
Model 20
Swing Over Cross Slide 14½
"
24-Spindle Speeds 8 thru 451
SPINDLE THRU HOLE 9-9/16" diameter
120-Threading & 60 Feeds
Drive motor 20 hp
Equipped with
     
Front & Rear Chucks, each
21" diameter Four Independent Jaws.
     
Taper Attachment.    1-Steady Rest Roller Type with 8" diameter hole.
      1-Steady Rest Roller Type with 8" diameter hole.
      1-Coolant Pump.
      1-Four Way Tool Holder,    Full Chip Pan.
 
Inventory Reference L4106-10406   23" swing x 126" centers LODGE & SHIPLEY HOLLOW SPINDLE LATHE Model 20, Swing Over Cross Slide 14½", 24-Spindle Speeds 8 thru 451, SPINDLE THRU HOLE 9-9/16" diameter, 120-Threading & 60 Feeds, Drive motor 20 hp, Equipped with Front & Rear Chucks, each 21" diameter Four Independent Jaws, Taper Attachment, 1-Steady Rest Roller Type with 8" diameter hole, 1-Steady Rest Roller Type with 8" diameter hole, 1-Coolant Pump,1-Four Way Tool Holder, Full Chip Pan
 23" swing x 126" centers LODGE & SHIPLEY HOLLOW SPINDLE LATHE Model 20, Swing Over Cross Slide 14½", 24-Speeds 8 thru 451, SPINDLE THRU HOLE 9-9/16" diameter, Drive 20 hp, Equipped with Front & Rear Chucks, each 21" diameter Four Independent Jaws, Taper Attachment, 1-Steady Rest Roller Type with 8" diameter hole, 1-Steady Rest Roller Type with 8" diameter hole, 1-Coolant Pump,1-Four Way Tool Holder, Full Chip Pan, Photo Tailstock - Headstock Photo Tailstock to Headstock Front view.  
   23" swing x 126" centers LODGE & SHIPLEY HOLLOW SPINDLE LATHE Model 20, Swing Over Cross Slide 14½", 24-Speeds 8 thru 451, SPINDLE THRU HOLE 9-9/16" diameter, Drive 20 hp, Equipped with Front & Rear Chucks, each 21" diameter Four Independent Jaws, Taper Attachment, 1-Steady Rest Roller Type with 8" diameter hole, 1-Steady Rest Roller Type with 8" diameter hole, 1-Coolant Pump,1-Four Way Tool Holder, Full Chip Pan, Photo Headstock to Tailstock Front view Photo Headstock to Tailstock Front view.     23" swing x 126" centers LODGE & SHIPLEY HOLLOW SPINDLE LATHE Model 20, Swing Over Cross Slide 14½", 24-Speeds 8 thru 451, SPINDLE THRU HOLE 9-9/16" diameter, Drive 20 hp, Equipped with Front & Rear Chucks, each 21" diameter Four Independent Jaws, Taper Attachment, 1-Steady Rest Roller Type with 8" diameter hole, 1-Steady Rest Roller Type with 8" diameter hole, 1-Coolant Pump,1-Four Way Tool Holder, Full Chip Pan, Photo Chuck on left side of Headstock Photo End view Chuck on left side of Headstock.
 23" swing x 126" centers LODGE & SHIPLEY HOLLOW SPINDLE LATHE Model 20, Swing Over Cross Slide 14½", 24-Speeds 8 thru 451, SPINDLE THRU HOLE 9-9/16" diameter, Drive 20 hp, Equipped with Front & Rear Chucks, each 21" diameter Four Independent Jaws, Taper Attachment, 1-Steady Rest Roller Type with 8" diameter hole, 1-Steady Rest Roller Type with 8" diameter hole, 1-Coolant Pump,1-Four Way Tool Holder, Full Chip Pan,, Photo rear view Headstock Photo Rear view Headstock.     23" swing x 126" centers LODGE & SHIPLEY HOLLOW SPINDLE LATHE Model 20, Swing Over Cross Slide 14½", 24-Speeds 8 thru 451, SPINDLE THRU HOLE 9-9/16" diameter, Drive 20 hp, Equipped with Front & Rear Chucks, each 21" diameter Four Independent Jaws, Taper Attachment, 1-Steady Rest Roller Type with 8" diameter hole, 1-Steady Rest Roller Type with 8" diameter hole, 1-Coolant Pump,1-Four Way Tool Holder, Full Chip Pan,, Photo rear view Tailstock to Headstock Photo rear view Tailstock to Headstock.    23" swing x 126" centers LODGE & SHIPLEY HOLLOW SPINDLE LATHE Model 20, Swing Over Cross Slide 14½", 24-Speeds 8 thru 451, SPINDLE THRU HOLE 9-9/16" diameter, Drive 20 hp, Equipped with Front & Rear Chucks, each 21" diameter Four Independent Jaws, Taper Attachment, 1-Steady Rest Roller Type with 8" diameter hole, 1-Steady Rest Roller Type with 8" diameter hole, 1-Coolant Pump,1-Four Way Tool Holder, Full Chip Pan,, Photo close-up Headstock Photo close-up front view Headstock.
    23" swing x 126" centers LODGE & SHIPLEY HOLLOW SPINDLE LATHE Model 20, Swing Over Cross Slide 14½", 24-Speeds 8 thru 451, SPINDLE THRU HOLE 9-9/16" diameter, Drive 20 hp, Equipped with Front & Rear Chucks, each 21" diameter Four Independent Jaws, Taper Attachment, 1-Steady Rest Roller Type with 8" diameter hole, 1-Steady Rest Roller Type with 8" diameter hole, 1-Coolant Pump,1-Four Way Tool Holder, Full Chip Pan,, Photo close-up Headstock front Chuck Photo close-up Headstock front Chuck.      23" swing x 126" centers LODGE & SHIPLEY HOLLOW SPINDLE LATHE Model 20, Swing Over Cross Slide 14½", 24-Speeds 8 thru 451, SPINDLE THRU HOLE 9-9/16" diameter, Drive 20 hp, Equipped with Front & Rear Chucks, each 21" diameter Four Independent Jaws, Taper Attachment, 1-Steady Rest Roller Type with 8" diameter hole, 1-Steady Rest Roller Type with 8" diameter hole, 1-Coolant Pump,1-Four Way Tool Holder, Full Chip Pan,, Photo close-up Carriage Photo close-up Carriage.
 23" swing x 126" centers LODGE & SHIPLEY HOLLOW SPINDLE LATHE Model 20, Swing Over Cross Slide 14½", 24-Speeds 8 thru 451, SPINDLE THRU HOLE 9-9/16" diameter, Drive 20 hp, Equipped with Front & Rear Chucks, each 21" diameter Four Independent Jaws, Taper Attachment, 1-Steady Rest Roller Type with 8" diameter hole, 1-Steady Rest Roller Type with 8" diameter hole, 1-Coolant Pump,1-Four Way Tool Holder, Full Chip Pan,, Photo close-up rear view Carriage Photo close-up rear view Carriage.   23" swing x 126" centers LODGE & SHIPLEY HOLLOW SPINDLE LATHE Model 20, Swing Over Cross Slide 14½", 24-Speeds 8 thru 451, SPINDLE THRU HOLE 9-9/16" diameter, Drive 20 hp, Equipped with Front & Rear Chucks, each 21" diameter Four Independent Jaws, Taper Attachment, 1-Steady Rest Roller Type with 8" diameter hole, 1-Steady Rest Roller Type with 8" diameter hole, 1-Coolant Pump,1-Four Way Tool Holder, Full Chip Pan,, Photo close-up rear view Taper Attachment. Photo close-up rear view Carriage with Taper Attachment.

MOVING OUT OF WAREHOUSE and we have discounted our price:
      from $28,500.00     To  $20,500.00


 





 

 POLISHING LATHE & BUFFERS  L4106-









 

SECOND OPERATION LATHES L4805- 


HARDINGE
SECOND OPERATION LATHE,  Model DSM-59
SUPER PRECISION
Swing Over Bed 9"
Swing Over Cross Slide 6"
Variable Speed 230 thru 3,500 rpm
Hand Feed Cross Slide
Equipped with:
    Vertical Cut Off Slide.
    Double Cross Slide with Straight & Taper Turning Slide and Tooling
    6-Position Turret with Tooling     Quick Acting Collet Closer and  45-Collets 5C
    Front & Rear Factory Splash Guards
EXCELLENT CONDITION    
Inventory Reference  L4805-10292  CLICK HERE FOR QUOTATION  hardinge second operation lathe, super precision,  model DSM59, swing over bed 9", swing over cross slide 6", bed length 36", vari spindle speed 230-3500 rpm, 1.250" spindle thru hole, quick acting 5C collet holder, large seletion of cross slide and turret tooling, 45 5C collets, Serial Number DV59-17171 
CLICK HERE FOR PHOTO  hardinge second operation lathe, super precision,  model DSM59, swing over bed 9", swing over cross slide 6", bed length 36", vari spindle speed 230-3500 rpm, 1.250" spindle thru hole, quick acting 5C collet holder, large seletion of cross slide and turret tooling, 45 5C collets, Serial Number DV59-17171, Photo Front view Photo Front view.     CLICK HERE FOR PHOTO  hardinge second operation lathe, super precision,  model DSM59, swing over bed 9", swing over cross slide 6", bed length 36", vari spindle speed 230-3500 rpm, 1.250" spindle thru hole, quick acting 5C collet holder, large seletion of cross slide and turret tooling, 45 5C collets, Serial Number DV59-17171, Photo Control Panel End to Front view. Photo Control Panel End to Front view.
CLICK HERE FOR PHOTO  hardinge second operation lathe, super precision,  model DSM59, swing over bed 9", swing over cross slide 6", bed length 36", vari spindle speed 230-3500 rpm, 1.250" spindle thru hole, quick acting 5C collet holder, large seletion of cross slide and turret tooling, 45 5C collets, Serial Number DV59-17171, Photo Close up Headstock and Double Cross Slide. Photo Close up Headstock and Double Cross Slide.
CLICK HERE FOR PHOTO  hardinge second operation lathe, super precision,  model DSM59, swing over bed 9", swing over cross slide 6", bed length 36", vari spindle speed 230-3500 rpm, 1.250" spindle thru hole, quick acting 5C collet holder, large seletion of cross slide and turret tooling, 45 5C collets, Serial Number DV59-17171, Photo Close up 5-position Turret & Tooling. Photo Close up 5-position Turret & Tooling.
CLICK HERE FOR PHOTO  hardinge second operation lathe, super precision,  model DSM59, swing over bed 9", swing over cross slide 6", bed length 36", vari spindle speed 230-3500 rpm, 1.250" spindle thru hole, quick acting 5C collet holder, large seletion of cross slide and turret tooling, 45 5C collets, Serial Number DV59-17171, Photo Close up 5-position Turret & Tooling. Photo Close up 5-position Turret & Tooling.       CLICK HERE FOR PHOTO  hardinge second operation lathe, super precision,  model DSM59, swing over bed 9", swing over cross slide 6", bed length 36", vari spindle speed 230-3500 rpm, 1.250" spindle thru hole, quick acting 5C collet holder, large seletion of cross slide and turret tooling, 45 5C collets, Serial Number DV59-17171, Photo Close up 5-position Turret & Tooling. Photo Rear at Right End.



"New"  HARDINGE POWER COLLET CLOSER
Collet type 5C
Capacity   Round stock 1-1/16"   Hexagon stock 7/8"    Square stock 3/4"
Equipped with  Power Unit
          Spindle Collet Holder Tube Assembly
Inventory Reference T3980-9444 CLICK HERE FOR QUOTATION  hardinge power  5-C collet attachment_capacity 1.0625 inch round_0.75 inch square_0.875 hexagon_condition new_Number AU6_ ID NUMBER 1039483
List Price $2150.00
WEBSITE DISCOUNTED PRICE $989.00 

 

SPEED LATHES L4904-




 

SPINNING LATHES L5007-

27" swing x 23" centers BY GEORGE Reliance SPINNING LATHE  Model C2778
   Spindle Speeds, Infinitely Variable 460 thru 2800 rpm
   Vari Drive Motor 3 hp
Equipped with:
   18" wide Tool Rest mounted on adjustable Tool Holder that swings Left to Right and In/Out
   Live Center
   Misc. Hand Forming Tools
Inventory Reference L5007-10319 
CLICK HERE FOR QUOTATION  27" swing x 23" centers BY GEORGE Reliance SPINNING LATHE, Model C2778, Spindle Speeds Infinitely Variable 460 thru 2800 rpm, Vari Drive Motor 3 hp, Equipped with 18" wide Tool Rest mounted on adjustable Tool Holder that swings Left to Right and In/Out, 1-Live Center, and Misc. Hand Forming Tools  CLICK HERE FOR PHOTO  27" swing x 23" centers BY GEORGE Reliance SPINNING LATHE, Model C2778, Spindle Speeds Infinitely Variable 460 thru 2800 rpm, Vari Drive Motor 3 hp, Equipped with 18" wide Tool Rest mounted on adjustable Tool Holder that swings Left to Right and In/Out, 1-Live Center, and Misc. Hand Forming Tools, Photo Front view from Tailstock Photo Front view from Tailstock.      CLICK HERE FOR PHOTO  27" swing x 23" centers BY GEORGE Reliance SPINNING LATHE, Model C2778, Spindle Speeds Infinitely Variable 460 thru 2800 rpm, Vari Drive Motor 3 hp, Equipped with 18" wide Tool Rest mounted on adjustable Tool Holder that swings Left to Right and In/Out, 1-Live Center, and Misc. Hand Forming Tools, Photo Rear view Headstock to Tailstock Photo Rear view Headstock to Tailstock.
CLICK HERE FOR PHOTO  27" swing x 23" centers BY GEORGE Reliance SPINNING LATHE, Model C2778, Spindle Speeds Infinitely Variable 460 thru 2800 rpm, Vari Drive Motor 3 hp, Equipped with 18" wide Tool Rest mounted on adjustable Tool Holder that swings Left to Right and In/Out, 1-Live Center, and Misc. Hand Forming Tools, Photo Close-up Headstock. Photo Close-up Headstock.    CLICK HERE FOR PHOTO  27" swing x 23" centers BY GEORGE Reliance SPINNING LATHE, Model C2778, Spindle Speeds Infinitely Variable 460 thru 2800 rpm, Vari Drive Motor 3 hp, Equipped with 18" wide Tool Rest mounted on adjustable Tool Holder that swings Left to Right and In/Out, 1-Live Center, and Misc. Hand Forming Tools, Photo Close-up Rear End view Headstock Variable Speed Drive. Photo Close-up Rear End view Headstock Variable Speed Drive.
CLICK HERE FOR PHOTO  27" swing x 23" centers BY GEORGE Reliance SPINNING LATHE, Model C2778, Spindle Speeds Infinitely Variable 460 thru 2800 rpm, Vari Drive Motor 3 hp, Equipped with 18" wide Tool Rest mounted on adjustable Tool Holder that swings Left to Right and In/Out, 1-Live Center, and Misc. Hand Forming Tools, Photo Close-up Headstock Variable Speed Drive. Photo Close-up Variable Speed Drive.    CLICK HERE FOR PHOTO  27" swing x 23" centers BY GEORGE Reliance SPINNING LATHE, Model C2778, Spindle Speeds Infinitely Variable 460 thru 2800 rpm, Vari Drive Motor 3 hp, Equipped with 18" wide Tool Rest mounted on adjustable Tool Holder that swings Left to Right and In/Out, 1-Live Center, and Misc. Hand Forming Tools, Photo Rear view from Tailstock Photo Rear view from Tailstock.



   TOOLING & ACCESSORIES, LATHE: MISCELLANEOUS


"New"
  HARDINGE POWER COLLET CLOSER

Collet type 5C
Capacity   Round stock 1-1/16"   Hexagon stock 7/8"    Square stock 3/4"
Equipped with  Power Unit
          Spindle Collet Holder Tube Assembly
Inventory Reference T3980-9444 CLICK HERE FOR QUOTATION  hardinge power  5-C collet attachment_capacity 1.0625 inch round_0.75 inch square_0.875 hexagon_condition new_Number AU6_ ID NUMBER 1039483
List Price $2,150.00
WEBSITE DISCOUNTED PRICE $989.00    



HARDINGE
LATHE CROSS SLIDE
Equipped with:
    Pneumatic Feed.
    Pneumatic Part Clamping
Inventory Reference T3980-10307
WEBSITE DISCOUNTED PRICE $550.00
 


VERY LARGE SELECTION OF TURRET LATHE TOOLING

        "Please Email us at  
sales@centurymachinery.com



" We have Tooling for Wood Tuning Lathes "





 

TURRET LATHES, Ram Type  L6249-

5 WARNER & SWASEY TURRET LATHE  Square Head   Ram Type M4660
Bar Capacity 4½"
Swing over ways 20"
Two Spindle Speed Range 25 thru 1556 rpm.
Hydraulic & Manual Positioning on Cross Slide
Drive Motor dual hp. 10 / 20 hp
Equipped with: Hydraulic Bar Feed.   Loaded with Turret Tooling.
    Four Way Quick Change Tool Holder   
 
Inventory Reference  L6249-18866  CLICK HERE FOR QUOTATION  w & s turret lathe_size 5_model M-4660_ram type_sq hd_sw 20 in_hole 3 in_turret 6 pos_spds 50-1556 rpm_hyd bar fd_Serial 2284644
CLICK HERE FOR PHOTO  warner and swasey 5 square head turret lathe_model M-4660_ram type_swing over ways 20 inch_spindle bore 3 inch_6-position turret_spindle speeds 50 - 1556 rpm_hydraulic bar feed_Serial 2284644 
Overall Photo.      CLICK HERE FOR PHOTO  warner and swasey 5 square head turret lathe_model M-4660_ram type_swing over ways 20 inch_spindle bore 3 inch_6-position turret_spindle speeds 50 - 1556 rpm_hydraulic bar feed_Serial 2284644
Photo Bar Feed to Headstock
MOVING OUT OF WAREHOUSE DISCOUNTED PRICE $4,750.00

"We have in stock a large selection of TURRET LATHE TOOLING"
     Please send us a list of tooling you require.





 TURRET LATHE, Saddle Type  L6304-




 

  WOODWORKING & PATTERN MAKER LATHES L5007  W8330-





This is only a partial listing, Please send us your current or future requirements.
Call  1-213-627-2847     Fax  1-213-627-2499   or
E-Mail us at  sales@centurymachinery.com

" THANK YOU for taking the time to visit our web site "