Link back to Home Page► www.centurymachinery.com

POINT and CLICK CATEGORIES or JUST SCROLL DOWN,
RADIAL DRILLS are sorted by Arm Length.

*RADIAL DRILLS 2 FOOT (612mm) ARM LENGTH*
*RADIAL DRILLS 3 FOOT (918mm) ARM LENGTH*
*RADIAL DRILLS 4 FOOT (1225mm) ARM LENGTH*
*RADIAL DRILLS 5 FOOT (1530mm) ARM LENGTH*
*RADIAL DRILLS 6 FOOT (1836mm) ARM LENGTH*
*RADIAL DRILLS 7 FOOT (2142mm) ARM LENGTH*
*RADIAL DRILLS 8 FOOT (2448mm) ARM LENGTH*
*
KNUCKLE JOINT RADIAL ARM DRILLS, Reach from 84" thru 144"*
 


If you require a Quote Sheet PLEASE  send  us your requirements:

CENTURY logo
1937 South Santa Fe Avenue
Los Angeles, California 90021

Email  sales@centurymachinery.com
Website  www.centurymachinery.com
Telephone 1-213-627-2847

Fax 1-213-627-2499


Serving Industry for 83 years

RADIAL DRILL 
2 FOOT (612mm) ARM LENGTH

"SORRY NONE IN STOCK AT THIS TIME."





RADIAL DRILL
3 FOOT (918mm) ARM LENGTH

GIDDINGS & LEWIS RADIAL ARM DRILL PRESS 
Chipmaster Model 951-2R

3
' Arm x 9" column
Spindle Taper 4MT
Spindle Speeds 60 thru 1,250 rpm
Power Elevation Column & Manual Clamping
Manual Clamping on Drill head
Maximum height spindle to base 54".
Power Down Feed for Drilling & Tapping.
Main Drive
3 hp
Equipped with:
   Tilting Drill Table     Coolant Pump 
Inventory Reference  D5700-10095  CLICK HERE FOR QUOTATION   gidding and lewis Chipmaster radial drill press_model 951_capacity 3 foot arm x 9 inch column diameter_spindle taper 4 MT_9-spindle speeds_spindle quill travel 9 inch-spindle travel by hand or power down_tapping function_spindle quill feeds 2 – 8 – 14 and 20_height under spindle up  arm up 54 inch_power elevation_T-slotted bed working surface is 25 inch x 40 inch_motor drive is 3 hp_controls equipped with spindle forward – reverse buttons_stop button_drill and tap switch_tap button_coolant start stop buttons_EQUIPPED WITH tapping_hand clamping on column -arm and head_power elevation on arm_1 universal table –size 24 inch x 20 inch by 24 inch wide x 10 inch down_1 chip guard_Serial Number 951-00281-66
    CLICK HERE FOR PHOTO  gidding and lewis Chipmaster radial drill press, capacity 3 foot arm x 9 inch column diameter, spindle 4 MT, 9-spindle speeds, spindle quill travel 9 inch-spindle travel by hand or power down, tapping function, spindle quill feeds 2 – 8 – 14 and 20, height under spindle 54 inch, power elevation, T-slotted bed working surface is 25 inch x 40 inch, motor drive is 3 hp, controls equipped with spindle forward – reverse buttons, stop button, drill and tap switch,tap button,coolant start stop buttons, EQUIPPED WITH tapping, hand clamping on column arm and head, power elevation on arm, 1 universal table  size 24 inch x 20 inch by 24 inch wide x 10 inch down,Serial Number 951-00281-66,Photo Right end to Front view Photo Right Side to Front View.   CLICK HERE FOR PHOTO  gidding and lewis Chipmaster radial drill press, capacity 3 foot arm x 9 inch column diameter, spindle 4 MT, 9-spindle speeds, spindle quill travel 9 inch-spindle travel by hand or power down, tapping function, spindle quill feeds 2 – 8 – 14 and 20, height under spindle 54 inch, power elevation, T-slotted bed working surface is 25 inch x 40 inch, motor drive is 3 hp, controls equipped with spindle forward – reverse buttons, stop button, drill and tap switch,tap button,coolant start stop buttons, EQUIPPED WITH tapping, hand clamping on column arm and head, power elevation on arm, 1 universal table  size 24 inch x 20 inch by 24 inch wide x 10 inch down,Serial Number 951-00281-66,Photo Left end to Front view Photo Left Side to Front View.    
CLICK HERE FOR PHOTO  gidding and lewis Chipmaster radial drill press, capacity 3 foot arm x 9 inch column diameter, spindle 4 MT, 9-spindle speeds, spindle quill travel 9 inch-spindle travel by hand or power down, tapping function, spindle quill feeds 2 – 8 – 14 and 20, height under spindle 54 inch, power elevation, T-slotted bed working surface is 25 inch x 40 inch, motor drive is 3 hp, controls equipped with spindle forward – reverse buttons, stop button, drill and tap switch,tap button,coolant start stop buttons, EQUIPPED WITH tapping, hand clamping on column arm and head, power elevation on arm, 1 universal table  size 24 inch x 20 inch by 24 inch wide x 10 inch down,Serial Number 951-00281-66, Photo close-up Upper Column, Arm Elevation Screw, Left side Head Cross Way Photo close-up Upper Column, Arm Elevation Screw, Left side Head Cross Way

    CLICK HERE FOR PHOTO  gidding and lewis Chipmaster radial drill press, capacity 3 foot arm x 9 inch column diameter, spindle 4 MT, 9-spindle speeds, spindle quill travel 9 inch-spindle travel by hand or power down, tapping function, spindle quill feeds 2 – 8 – 14 and 20, height under spindle 54 inch, power elevation, T-slotted bed working surface is 25 inch x 40 inch, motor drive is 3 hp, controls equipped with spindle forward – reverse buttons, stop button, drill and tap switch,tap button,coolant start stop buttons, EQUIPPED WITH tapping, hand clamping on column arm and head, power elevation on arm, 1 universal table  size 24 inch x 20 inch by 24 inch wide x 10 inch down,Serial Number 951-00281-66, Photo Lower Column, Left side Head Cross Ways & Top Tilt Table Photo Lower Column, Left side Head Cross Ways & Top Tilt Table.
CLICK HERE FOR PHOTO  gidding and lewis Chipmaster radial drill press, capacity 3 foot arm x 9 inch column diameter, spindle 4 MT, 9-spindle speeds, spindle quill travel 9 inch-spindle travel by hand or power down, tapping function, spindle quill feeds 2 – 8 – 14 and 20, height under spindle 54 inch, power elevation, T-slotted bed working surface is 25 inch x 40 inch, motor drive is 3 hp, controls equipped with spindle forward – reverse buttons, stop button, drill and tap switch,tap button,coolant start stop buttons, EQUIPPED WITH tapping, hand clamping on column arm and head, power elevation on arm, 1 universal table  size 24 inch x 20 inch by 24 inch wide x 10 inch down,Serial Number 951-00281-66, Photo close-up Left Side Head Cross Ways Photo close-up Left side Head Cross Ways.     CLICK HERE FOR PHOTO  gidding and lewis Chipmaster radial drill press, capacity 3 foot arm x 9 inch column diameter, spindle 4 MT, 9-spindle speeds, spindle quill travel 9 inch-spindle travel by hand or power down, tapping function, spindle quill feeds 2 – 8 – 14 and 20, height under spindle 54 inch, power elevation, T-slotted bed working surface is 25 inch x 40 inch, motor drive is 3 hp, controls equipped with spindle forward – reverse buttons, stop button, drill and tap switch,tap button,coolant start stop buttons, EQUIPPED WITH tapping, hand clamping on column arm and head, power elevation on arm, 1 universal table  size 24 inch x 20 inch by 24 inch wide x 10 inch down,Serial Number 951-00281-66, Photo close-up Electric Controls and Right side Head Cross Ways. Photo close-up Electric Controls and Right side Head Cross Ways.
CLICK HERE FOR PHOTO  gidding and lewis Chipmaster radial drill press, capacity 3 foot arm x 9 inch column diameter, spindle 4 MT, 9-spindle speeds, spindle quill travel 9 inch-spindle travel by hand or power down, tapping function, spindle quill feeds 2 – 8 – 14 and 20, height under spindle 54 inch, power elevation, T-slotted bed working surface is 25 inch x 40 inch, motor drive is 3 hp, controls equipped with spindle forward – reverse buttons, stop button, drill and tap switch,tap button,coolant start stop buttons, EQUIPPED WITH tapping, hand clamping on column arm and head, power elevation on arm, 1 universal table  size 24 inch x 20 inch by 24 inch wide x 10 inch down,Serial Number 951-00281-66, Photo close-up Spindle Quill Photo Close-up Spindle Quill.      CLICK HERE FOR PHOTO  gidding and lewis Chipmaster radial drill press, capacity 3 foot arm x 9 inch column diameter, spindle 4 MT, 9-spindle speeds, spindle quill travel 9 inch-spindle travel by hand or power down, tapping function, spindle quill feeds 2 – 8 – 14 and 20, height under spindle 54 inch, power elevation, T-slotted bed working surface is 25 inch x 40 inch, motor drive is 3 hp, controls equipped with spindle forward – reverse buttons, stop button, drill and tap switch,tap button,coolant start stop buttons, EQUIPPED WITH tapping, hand clamping on column arm and head, power elevation on arm, 1 universal table  size 24 inch x 20 inch by 24 inch wide x 10 inch down,Serial Number 951-00281-66, Photo close-up Universal Tilting Drill Table Photo close-up Universal Tilting Drill Table.







 

RADIAL DRILL
4 FOOT (1225mm) ARM LENGTH


CARLTON RADIAL ARM DRILL PRESS   Model 1A
4'  arm x 11" column
Spindle Taper 4MT

Spindle Travel 12"
Spindle Speeds 30 thru 1500 rpm
Power Elevation and Clamping
Main Drive
Two Speed  5 hp
Equipped with  L-Base 36½" x 45"
     Coolant Pump
Inventory Reference D5700-19097  CLICK HERE FOR QUOTATION  carlton radial arm drill_4 foot arm x 11 in column_ model 1A_ spindle speeds 30 - 1500 rpm_spindle taper 4MT_quill travel 12 in_ maximum height under spindle 53.5 inch_ power elevation and clamping_with L-base  CLICK HERE FOR PHOTO  carlton radial arm drill_4 foot arm x 11 in column_ model 1A_ spindle speeds 30 - 1500 rpm_spindle taper 4MT_quill travel 12 in_ maximum height under spindle 53.5 inch_ power elevation and clamping_with L-base Photo







 

RADIAL DRILL
5 FOOT (1530mm) ARM LENGTH


KAO MING RADIAL ARM DRILL PRESS
5'.25" arm x 15.
" column

Spindle Taper
5MT
Spindle Speeds 30 thru 1,580 rpm.
Vertical Height under spindle 68"
Power  Elevation and Clamping
Main Drive Motor 7½ hp
Equipped with:
  Power Clamping Head and Arm
  Power Elevation Arm.
  Tool Ejector.     1-Box Table.
  Coolant Pump
Inventory Reference D5700-10157  CLICK HERE FOR QUOTATION  KAO MING RADIAL ARM DRILL_model KMR-1600DH_arm length 5.25’_column diameter 15⅜”_spindle taper 5 MT_12-spindle speeds 30 thru 1580 rpm_spindle quill travel 11¾”_height spindle to base spindle quill up & arm up maximum 61-13/16”_spindle quill Up & arm down minimum 17⅛”_vertical movement of arm  32⅞”_spindle head longitudinal travel 48-7/16”_spindle quill feed  manual and power_spindle feed ranges  0.0023–0.044 IPM_0.06-1.12 mm/rev_work base has 3 T-slots_base work area 36½” FB x 64½” LR_base over-all size_motor drives are wired for 220 volts 3 phase_spindle motor 7½ H.P_elevation motor 2 H.P_clamping motor 1 H.P_coolant motor ⅛ H.P_equipped with the following operator control _power clamping on head and arm_power elevation on arm_tool ejector_coolant pump_one shot lube_1- box table 4-T 19½" x 26” by 2-T 15½" x 26”_Serial Number 1686_Mfg 1984
CLICK HERE FOR PHOTO  KAO MING RADIAL ARM DRILL_model KMR-1600DH_arm length 5.25’_column diameter 15⅜”_spindle taper 5 MT_12-spindle speeds 30 thru 1580 rpm_spindle quill travel 11¾”_height spindle to base spindle quill up & arm up maximum 61-13/16”_spindle quill Up & arm down minimum 17⅛”_vertical movement of arm  32⅞”_spindle head longitudinal travel 48-7/16”_spindle quill feed  manual and power_spindle feed ranges  0.0023–0.044 IPM_0.06-1.12 mm/rev_work base has 3 T-slots_base work area 36½” FB x 64½” LR_base over-all size_motor drives are wired for 220 volts 3 phase_spindle motor 7½ H.P_elevation motor 2 H.P_clamping motor 1 H.P_coolant motor ⅛ H.P_equipped with the following operator control _power clamping on head and arm_power elevation on arm_tool ejector_coolant pump_one shot lube_1- box table 4-T 19½" x 26” by 2-T 15½" x 26”_Serial Number 1686_Mfg 1984_Photo Front view Photo Front view.    CLICK HERE FOR PHOTO  KAO MING RADIAL ARM DRILL_model KMR-1600DH_arm length 5.25’_column diameter 15⅜”_spindle taper 5 MT_12-spindle speeds 30 thru 1580 rpm_spindle quill travel 11¾”_height spindle to base spindle quill up & arm up maximum 61-13/16”_spindle quill Up & arm down minimum 17⅛”_vertical movement of arm  32⅞”_spindle head longitudinal travel 48-7/16”_spindle quill feed  manual and power_spindle feed ranges  0.0023–0.044 IPM_0.06-1.12 mm/rev_work base has 3 T-slots_base work area 36½” FB x 64½” LR_base over-all size_motor drives are wired for 220 volts 3 phase_spindle motor 7½ H.P_elevation motor 2 H.P_clamping motor 1 H.P_coolant motor ⅛ H.P_equipped with the following operator control _power clamping on head and arm_power elevation on arm_tool ejector_coolant pump_one shot lube_1- box table 4-T 19½" x 26” by 2-T 15½" x 26”_Serial Number 1686_Mfg 1984_Photo Drill Head front view. Photo Drill Head front view.
     CLICK HERE FOR PHOTO  KAO MING RADIAL ARM DRILL_model KMR-1600DH_arm length 5.25’_column diameter 15⅜”_spindle taper 5 MT_12-spindle speeds 30 thru 1580 rpm_spindle quill travel 11¾”_height spindle to base spindle quill up & arm up maximum 61-13/16”_spindle quill Up & arm down minimum 17⅛”_vertical movement of arm  32⅞”_spindle head longitudinal travel 48-7/16”_spindle quill feed  manual and power_spindle feed ranges  0.0023–0.044 IPM_0.06-1.12 mm/rev_work base has 3 T-slots_base work area 36½” FB x 64½” LR_base over-all size_motor drives are wired for 220 volts 3 phase_spindle motor 7½ H.P_elevation motor 2 H.P_clamping motor 1 H.P_coolant motor ⅛ H.P_equipped with the following operator control _power clamping on head and arm_power elevation on arm_tool ejector_coolant pump_one shot lube_1- box table 4-T 19½" x 26” by 2-T 15½" x 26”_Serial Number 1686_Mfg 1984_Photo Drill Head left side view. Photo Drill Head left side view.     CLICK HERE FOR PHOTO  KAO MING RADIAL ARM DRILL_model KMR-1600DH_arm length 5.25’_column diameter 15⅜”_spindle taper 5 MT_12-spindle speeds 30 thru 1580 rpm_spindle quill travel 11¾”_height spindle to base spindle quill up & arm up maximum 61-13/16”_spindle quill Up & arm down minimum 17⅛”_vertical movement of arm  32⅞”_spindle head longitudinal travel 48-7/16”_spindle quill feed  manual and power_spindle feed ranges  0.0023–0.044 IPM_0.06-1.12 mm/rev_work base has 3 T-slots_base work area 36½” FB x 64½” LR_base over-all size_motor drives are wired for 220 volts 3 phase_spindle motor 7½ H.P_elevation motor 2 H.P_clamping motor 1 H.P_coolant motor ⅛ H.P_equipped with the following operator control _power clamping on head and arm_power elevation on arm_tool ejector_coolant pump_one shot lube_1- box table 4-T 19½" x 26” by 2-T 15½" x 26”_Serial Number 1686_Mfg 1984_Photo Drill Head front to right side view. Photo Drill Head front to right side.
CLICK HERE FOR PHOTO  KAO MING RADIAL ARM DRILL_model KMR-1600DH_arm length 5.25’_column diameter 15⅜”_spindle taper 5 MT_12-spindle speeds 30 thru 1580 rpm_spindle quill travel 11¾”_height spindle to base spindle quill up & arm up maximum 61-13/16”_spindle quill Up & arm down minimum 17⅛”_vertical movement of arm  32⅞”_spindle head longitudinal travel 48-7/16”_spindle quill feed  manual and power_spindle feed ranges  0.0023–0.044 IPM_0.06-1.12 mm/rev_work base has 3 T-slots_base work area 36½” FB x 64½” LR_base over-all size_motor drives are wired for 220 volts 3 phase_spindle motor 7½ H.P_elevation motor 2 H.P_clamping motor 1 H.P_coolant motor ⅛ H.P_equipped with the following operator control _power clamping on head and arm_power elevation on arm_tool ejector_coolant pump_one shot lube_1- box table 4-T 19½" x 26” by 2-T 15½" x 26”_Serial Number 1686_Mfg 1984_Photo Box Table. Photo Box Table.
WE REQUIRE SPACE, THIS UNIT DISCOUNTED TO $8,550.00


 

RADIAL DRILL
6 FOOT (1836mm) ARM LENGTH

FOSDICK RADIAL ARM DRILL PRESS
6' arm x 15" column
Spindle Taper 6MT

Spindle Speeds 20 thru 1,406 rpm.
Height under Spindle 70" maximum
with Threading Feeds
Power Elevation and Clamping.
Motor Drive 20 hp.
Equipped with Coolant Pump
Inventory Reference  D5700-10399  6' arm x 15" column FOSDICK RADIAL ARM DRILL PRESS, Spindle Taper 6MT, Spindle Speeds 20 thru 1,406 rpm, Height under Spindle 70" maximum, with Threading Feeds, Power Elevation and Clamping, Motor Drive 20 hp, Equipped with Coolant Pump
WE REQUIRE SPACE, THIS UNIT DISCOUNTED TO $9,545.00





 

RADIAL DRILL
7 FOOT (2142mm) ARM LENGTH









RADIAL DRILL
8 FOOT (2448mm) ARM LENGTH

AMERICAN RADIAL ARM DRILL PRESS   Hole Wizard
8' arm x 19" column
Spindle Taper 6MT

Spindle Speeds 50 thru 1500 rpm.
Power Elevation and Clamping.
Motor Drive 30 hp.
Equipped with Coolant Pump
Inventory Reference  D5700-9174  CLICK HERE FOR PHOTO  american hole wizard radial drill press_ capacity 8 foot arm x 19 inch column_ spindle taper 6MT_ spindle speeds 50 thru 1500 rpm_ power elevation and clamping_motor drive 30 hp Photo
WE REQUIRE SPACE, THIS UNIT DISCOUNTED
 








 

ONSRUD KNUCKLE JOINT RADIAL ARM DRILLS,
    Reach from 84" thru 144"


WE ARE MOVING OUT OF OUR WAREHOUSE and DISCOUNTING ALL ROUTERS and DRILLS

Several units listed below have DRILLING HEAD and ROUTER HEAD

ONSRUD RADIAL ARM  DRILL   Model A1C    (Two Arms)
   
each Arm Reach 84" centerline of spindle to centerline of column pivot.
    Two pivoted sections located on each arm
   
two Drilling Heads,  two spindle speeds 14,500  and 7430 rpm.
    Capable of over reaching on table, approximate 48" x 72"
Inventory Reference R8903-5355 CLICK HERE FOR QUOTATION  onsrud radial arm drill_ model A1C_2- two segmented arms_ reach 84 inch center of column_2- drill spindles each 1.5  hp_ 7300 and 14000 rpm_Serial Number on Base 6169
WE REQUIRE SPACE, THIS UNIT DISCOUNTED TO $5,850.00



ONSRUD RADIAL ARM ROUTER and DRILL   Model A2D  (One Arms)
   
each Arm Reach 110" centerline of spindle to centerline of column pivot.
    Two pivoted sections located on each arm
   
one Drilling Heads,  two spindle speeds 14,500  and 7430 rpm.
    Capable of over reaching on table, approximate 48" x 144"
Inventory Reference  R8903-
WE REQUIRE SPACE, THIS UNIT DISCOUNTED TO $5,750.00



ONSRUD RADIAL ARM  DRILL   Model A4DD   (Two Arms)
   
each Arm Reach 124" centerline of spindle to centerline of column pivot
    Three pivoted sections located on each arm
   
two Drilling Heads   two spindle speeds 14,500  and 7430 rpm.
    Capable of over reaching on table  approximate 48" x 144"
Inventory Reference R8903-5698 CLICK HERE FOR QUOTATION  onsrud radial arm drill_ model A4DD_ two three segmented arms_ arm reach 124 inch center of column_ 2- drilling spindles each 1.5  hp_ 7300 and 14000 rpm_Serial Number on Base 2491
WE REQUIRE SPACE, THIS UNIT DISCOUNTED TO $3,750.00


               

EKSTROM CARLSON RADIAL ARM ROUTER and DRILL    Model V109  (Two Arm)
   
Arm Reach 109" centerline of spindle to centerline of column pivot
   
Two pivoted sections located on each arm
    Router Spindle Drive Motor 5 hp., Spindle Speed 14,580 rpm
    Drill Head Spindle Speed Speed 14,500  and 7430 rpm
Inventory Reference R8903-1655 CLICK HERE FOR PHOTO ekstrom carlson radial arm router and drill_model V109_arm reach 109 inch_router drive 5 hp_routing spindle speed 14 580 rpm_ Drill Spindle two speeds 7430 rpm and 14500 rpm Photo
WE REQUIRE SPACE, THIS UNIT DISCOUNTED TO $2,850.00


 

   " IF YOU DON'T SEE IT "
We will be adding more Photo's to our site.
   *Please Call, Fax or E-mail
   Phone  1-213-627-2847       Fax  1-213-627-2499
or
      E-MAIL   
sales@centurymachinery.com

" THANK YOU for taking the time to visit our web site "